• Smart Media Journal
• /
• v.8 no.2
• /
• pp.21-28
• /
• 2019

Recent research on energy harvesting wireless sensor networks focuses on the development of techniques to solve the limited energy resource problem and to extend the whole network life efficiently. Energy harvesting technology can increase the lifetime of a network, but data transmission becomes unavailable when it harvests energy from radio frequency, resulting longer network delay with respect to the increased time in energy harvesting. Therefore, building energy harvesting wireless sensor network should consider the possible network delay as well as the network lifetime problem. In this paper, we propose a new MAC protocol that minimizes end-to-end network delay by adjusting the data transmission time for a packet based on estimating the energy for data transmission along with the amount of traffic flowing into the network and harvested energy. For this goal, it engineers an energy management mechanism that adjusts the sleep time of the network by measuring energy harvesting time. In addition, with simulation results it shows that the proposed MAC protocol improves the performance in terms of energy consumption and end-to-end delay, compared to the existing MAC protocols.

• Journal of KIISE:Information Networking
• /
• v.27 no.2
• /
• pp.160-174
• /
• 2000

Nowadays, most widely used transport protocol, TCP is tuned to perform well in traditional networks where packet losses occur mostly because of congestion. TCP performs reliable end-to-end packet transmission under the assumption of low packet error rate. However, networks with wireless links suffer from significant losses due to high error rate and handoffs. TCP responds to all losses by invoking congestion control and avoidance algorithms, resulting in inefficient use of network bandwidth and degraded end-to-end performance in that system. To solve this problem, several methods have been proposed. In this paper, we analyse and compare these methods and propose appropriate model for improving TCP performance in the network with wireless links. This model uses TCP selective acknowledgement (SACK) option between TCP ends, and also uses caching method at the base station. Our simulation results show that using TCP SACK option with base station caching significantly reduces unnecessary duplicate retransmissions and recover packet losses effectively.

• Journal of KIISE:Information Networking
• /
• v.35 no.2
• /
• pp.120-129
• /
• 2008

The purpose of sensor network is gathering the information from sensor nodes. If there are selfish node that deliberately avoid packet forwarding to save their own energy, the sensor network has trouble to collect information smoothly. To solve this problem we suggest a mechanism which uses credit payment schema according to the amount of forwarding packets. Sensor nodes use credits to send their own message and they forward packets of other sensor nodes to get credits. To offer authenticity we combined the roles of sink node and server, also we used piggybacking not to send additional report message. The packet trace route is almost fixed because sensor node doesn't have mobility. In this case, it happens that some sensor nodes which don't receive forwarding packets therefore they can't get credit. So, we suggested the way to give more credits to these sensor nodes. Finally, we simulated the suggested mechanism to evaluate performance with ns2(network simulator). As a result, packet transmission rate was kept on a high rate and the number of arrival packets to sink node was increased. Also, we could verify that more sensor nodes live longer due to deceasing the energy consumption of sensor nodes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.11
• /
• pp.975-983
• /
• 2012

Multi network interface has become common phenomenon for mobile devices such as smart phone which has 3G, LTE-advanced, WiFi. Consequently, there are researches for a transmission strategies using multiple paths below on end-to-end connection. MPTCP which is proposed and being standardized by the IETF as a new transport protocol can perform concurrent multipath transfer using multiple network interfaces. However, current MPTCP has performance degradation when it use heterogeneous networks which have quite different network characteristics. Therefore, this paper proposes the packet scheduling scheme and receiver-based recovery scheme to reduce the performance degradation due to reordering problem. Also, simulation results show that the proposed scheme can improve throughput and retransmission performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8B
• /
• pp.954-961
• /
• 2011

To apply Wi-Fi technique to the Broadcast field, we have to study features of IEEE 802.11 Broadcast packet. IEEE 802.11 Broadcast technique cannot guarantee successful packet delivery than IEEE 802.11 Unicast. A promising solution to this problem is the use of FEC(Forward Error Correction) mechanisms. However, the adjustment of the FEC redundancy rate is not a trivial issue due to the dynamic wireless environment. In order to explore the above issues we conducted an experimental study of the packet loss behavior of the IEEE 802.11g protocol. In order to study, we implemented a broadcast test bed. Based on the experimental results, we provide guidelines on wireless lan parameters(packet size, transmission rate(11g), background traffic). From this experimental study, we provide FEC redundancy rate.

• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.891-898
• /
• 2003

This paper analyzes and proposes a scheme that improves the performance of the RTP that is developed to support the end-to-end transmission function and QoS monitor function for real-time multimedia data transmission. Although the existing RTP module supports real-time transmission, it has some problems in guaranteeing QoS parameters. To solve this problem, we propose a new Selective Repeat Adaptive Rate Control (SRARC). The SRARC can support QoS by referring to the data transmission status from the client and then classifying the network status into three levels. It selectively transmits multimedia data and dynamically controls transmission rates based on such information as bandwidth, packet loss rate, and latency that can be calculated in data transfer phase. To verify the SRARC, we implement it in real local area networks and compare the QoS parameters of the SRARC with those of the SR and RTP By the experimental results, the SRARC shows better performance in the aspects of bandwidth usage rate, packet loss rates, and transmission delays than the existing RTP schemes.

• Journal of Korea Multimedia Society
• /
• v.5 no.6
• /
• pp.697-703
• /
• 2002

In this paper, we propose the adaptive multi stream transmission technique based on SPIHT video signal for the highest quality service over the current Internet that does not guarantee QoS. In addition to the reliable transmission of the video stream over the asynchronous packet network, the proposed approach provides the transmission using the adaptive frame pattern control and multi steam over the TCP for continuous replay. The adaptive frame pattern control makes the transmission date scalable in accordance with the client's buffer status. Apart from this, the multi stream transmission improves the efficiency of video stream, and is robust to the network jitter problem, and maximally utilizes the bandwidth of the client's. As a result of the experiment, the DR(delay ratio) in the proposed adaptive multi-stream transmission is more close to zero than in the existing signal stream transmission, which enables the best-efforts service to be implemented.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.115-122
• /
• 2017

In vehicular safety service, every vehicle broadcasts Basic Safety Message (BSM) periodically to inform neighbor vehicles of host vehicle information. However, this can cause network congestion in a region that is crowded with vehicles resulting in a reduction in the message delivery ratio and an increase in the end-to-end delay. Therefore, it could destabilize the vehicular safety service system. In this paper, in order to improve the congestion control and to consider the hidden node problem, we propose a congestion control scheme using entire network congestion level estimation combined with transmission power control, data rate control and time slot based transmission control algorithm. The performance of this scheme is evaluated using a Qualnet network simulator. The simulation result shows that our scheme mitigates network congestion in heavy traffic cases and enhances network capacity in light traffic cases, so that packet error rate is perfectly within 10% and entire network load level is maintained within 60~70%. Thus, it can be concluded that the proposed congestion control scheme has quite good performance.

• Journal of Digital Contents Society
• /
• v.12 no.3
• /
• pp.299-307
• /
• 2011

The MAC of IEEE 802.11 WLAN to control data transmission uses two control methods called DCF and PCF. The DCF controls the transmission based on CSMA/CA The BEB backoff algorithm of DCF shows relatively excellent performance in situation that the number of competing station is less, but has a problem that performance of throughput and delay is degraded in situation that the number of competing station is increased. This paper mathematically analyzes an MIMD backoff algorithm considering retry limit that increases the CW to doubled after collision and decreases smoothly the CW to halves after successful transmission in order to reduce the collision probability. To prove efficiency of the MIMD backoff algorithm, lots of simulations are conducted and analyzed.

• Journal of Communications and Networks
• /
• v.17 no.2
• /
• pp.172-183
• /
• 2015

To provide an efficient link maintenance approach, we propose a cross layer medium access control (LM-MAC) protocol for multichannel cognitive radio ad hoc networks. Link establishment and reliable transmission are two key problems for a perfect link maintenance mechanism. Since the cognitive user (CU) pairs have to reestablish their links each frame, in the proposed MAC protocol, three different access modes are designed to guarantee transmission efficiency in continuous frames. To enhance the transmission reliability, each CU will create a father spectrum list (FSL) after joining in the network. FSL is divided into three groups of sub-channels with different functions to compensate the packet loss caused by the primary users' appearance and the deep fading. Meanwhile, since the transmitter and the receiver will share the same FSL, periodical cooperative sensing is adopted to further optimize the former problem. Finally, compared with the existing opportunistic multichannel (OMC)-MAC protocol, the proposed LM-MAC protocol achieves better system performance in terms of saturation throughput, continuity and access delay.