• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.477-483
• /
• 2011

In this paper, we propose the design and implementation of the storage-based data sharing system in the separate network environment to improve efficiency of data transmission. The previous system generates files per received packet and transmit files to another network through storage. This system causes inefficiency by reading unnecessary blocks, when it transmits a number of files through storage. Our proposed system deals with this inefficiency by adopting concept of snapshot. Consequently, we create one file with snapshot so that the number of files can be reduced and the file size can be optimized according to the block size. The proposed system improves the response time significantly with the minimized reading of unnecessary blocks, compared to the previous system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.678-683
• /
• 2003

This study presents a result of performance with the design of network topology for voice and data integration under computer network. This network is consisted of FastEthernet, other LANs and ATM WAN(wide area network), and performance evaluation of delay in a PBX+IP network, delay in a VoIP network and delay in a IP+ATM network will be shown. We use parameters including network bandwidth, number of packet, routing protocol(IGRP, OSPF). We simulate integrated of voice and data used PBX. we will study further about the case of integrated of voice and data environments using PBX. and, evaluate IP+ATM WAN average measured network delay and average delay of VoIP network.

• International Journal of Railway
• /
• v.9 no.2
• /
• pp.36-40
• /
• 2016

TETRA communication system is very versatile system which can transmit voice + data and packet data optimized. Direct mode operation permits to connect between mobiles when mobile stain is out of coverage of networks. It can be more secure communication channel for railway signaling systems. Railway signaling systems use many of wayside signal equipment, which require many maintenance efforts and budget. Many railway authorities want to reduce and replace the wayside equipment. Radio based signaling systems are one of candidate for replacing the conventional signaling systems. The radio based signaling systems can replace track circuit and wayside signal. The radio systems permit to connect between control centers and trains. The radio systems have to ensure high quality of the connectivity more or equal to the existed track circuits. We studied the application of TETRA systems for railway radio systems for bridging between train control centers and trains. We provide an operation scenario for radio based train control system to ensure the safety require to the existed trains control system and satisfied the existed operational availability. We showed the data transmission speed, maximum bit error rate, and data coding for the radio-based signal system using TETRA systems.

• Journal of Sensor Science and Technology
• /
• v.16 no.5
• /
• pp.361-368
• /
• 2007

Small size real-time ECG signal analysis function by QRS-complex detection was put into sensor nodes. Wireless sensor nodes attached on the patient’s body transmit ECG data continuously in normal u-healthcare system. So there are heavy communication traffics between sensor nodes and gateways. New developed platform for real-time analysis of ECG signals on sensor node can be used as an advanced diagnosis and alarming system for healthcare. Sensor node does not need to transmit ECG data all the time in wireless sensor network and to server PC via gateway. When sensor node detects suspicion or abnormality in ECG, then the ECG data in the network was transmitted to the server PC for further powerful analysis. This system can reduce data packet overload and save some power in wireless sensor network. It can also increase the server performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.2 no.1
• /
• pp.5-21
• /
• 2008

In order to securely transmit multicast data packets in a mobile environment where frequent join/leave events are a characteristic of the environment, there is a need for a new secure and efficient group key management solution. We propose a secure group key generation/distribution solution providing scalability and reliability. Using this solution, when a mobile node, which is in a multicast session, enters a new domain, the agent of the domain joins the multicast session and coordinates its data packets with the mobile node. The agent encrypts and transmits subsequent data packets to the mobile node, using a local one-time pad key. This key is generated with FI sequences, enabling the mobile node to regenerate the same data packet, based on the information sent by the agent. Our performance analysis demonstrates that the proposed solution can significantly reduce the number of key generations and distributions, when it is applied to the hierarchical mobile IPv6 network.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.155-162
• /
• 1999

Various applications of video conferencing are required real-time transmission in order to offer service of best effort in internet. Because the bandwidth of internet changes dynamically, appropriated QoS could not be guaranteed To resolve the problem. available bandwidth between sender and receiver is measured. And according to measured bandwidth, the transmission of multimedia data is controlled In this paper, we propose algorithm of efficient transmission for best QoS in internet According to a present status of network, we measure available bandwidth using feedback RTCP information and change a compression rate to reduce a producing CODEC data. And according to the priority that is measured by packet loss for received RTCP information, we abandon frames indicated as lower weight in transmission buffer of sender.

• Journal of Biomedical Engineering Research
• /
• v.18 no.4
• /
• pp.373-380
• /
• 1997

In this paper, we describe the intrabed network in a patient monitoring system we developed The intrabed network handles data communication between the main unit of a bedside patient monitor and parameter modules plugged in it. We designed the intrabed network based on RS-485 and HDLC protocol with 1 Mbps data rate. Message exchanges are implemented based on three data structures of packet frame. and stream. We present the specification and the performance of the data communication network for the developed patient monitor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.12
• /
• pp.1198-1206
• /
• 2007

It is common to use PC or Digital picture frame in stand-alone fashion to view images, movies, or to listen MP3 musics which are considered as multimedia contents, However, such existing methods have weakness for expanding network requirements or augmenting extra data, in such case inevitably requiring external devices. With keeping in mind for such expansion, in this study, we have suggested a new concepts of network module which may utilize an image server for data transmission, in the proposed module, data alarm packet was defined for alerting incoming data from the image server and it became possible to synchronize between the image server and device not only in wired but also in wireless environments through UART. The method consists of a control module for an image server and a synchronization module between the server and the device. We have also tested the feasibility for future commercial usages such as advertisements through performance evaluations.

• The Korean Journal of Applied Statistics
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2015

Security has become an issue due to the rapid increases in internet traffic data network. Especially P2P traffic data poses a great challenge to network systems administrators. Preemptive measures are necessary for network quality of service(QoS) and efficient resource management like blocking suspicious traffic data. Deep packet inspection(DPI) is the most exact way to detect an intrusion but it may pose a private security problem that requires time. We used several machine learning methods to compare the performance in classifying network traffic data accurately over time. The Random Forest method shows an excellent performance in both accuracy and time.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.4
• /
• pp.87-94
• /
• 2016

This paper proposes an energy transmission method to maximize energy efficiency of a based station. This method makes use of classification of service type to solve an inefficient use of transmission power, which is from exponential relationship between the legacy data throughput and transmission power. The proposed one is a way to find the most energy-efficiency points with the transmitted optimal amount of data on users in a base station of wireless network environment. For this, we propose EETA (Energy-Efficient Transmission Algorithm) which can control the amount of data and the holding time at the base station. As a result, the proposed method can improve the energy efficiency of about 10% compared to the legacy base station.