• Journal of Korea Multimedia Society
• /
• v.10 no.5
• /
• pp.612-622
• /
• 2007

As compared with wired network environment, mobile VOD service in wireless network environment is difficult to guarantee the quality of VOD service due to the limitation of the system resources. Moreover, the wireless network has small bandwidth resources and short access range so that has limitations for providing the service to a large number of mobile clients. The limited battery capacity of a mobile device becomes an obstacle to mobile clients for enjoying VOD service for a long time. Therefore, these drawbacks should be considered in developing mobile VOD applications. This paper proposes a new technique for improving QoS of mobile VOD service by jointly use of broadcasting technique, which can provide VOD service to a large number of mobile clients simultaneously, and bursty communication technique, which can reduce the power consumption of a mobile device. With having these two techniques, streaming data are divided into segments, each of which is grouped into a particular packet and then transmitted at a time in the busty communication manner. In the performance evaluation, the power consumption on WNIC of a mobile device can be reduced by over 80%, and the initial service delay can be reduced in proportion to the number of channels compared with the existing staggered broadcasting technique.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.12
• /
• pp.409-414
• /
• 2015

The energy conservation is the most important subject for long run operation of the sensor nodes with limited power resources. Clustering is one of most energy efficient technique to grouped the sensor nodes into distinct cluster. But, in a cluster based WSN, CHs and gateways bear an extra work load to send the processed data to the sink. The inappropriate cluster formation may cause gateways overloaded and may increase latency in communication. In this paper, we propose a novel load balanced clustering model for improving energy efficiency and giving a guarantee of long network lifetime. We show the result of performance measurement experiments that designs using a branch and bound algorithm and a multi-start local search algorithm to compare with the existing load balanced clustering model.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.5
• /
• pp.179-186
• /
• 2008

In proportion as the growth of the wireless sensor network applications, we need for more accuracy wireless channel information. In the case of indoor or outdoor wireless sensor networks, multipath propagation causes severe problems in terms of fading. Therefore, a path-loss model for multipath environment is required to optimize communication systems. This paper deals with log-normal path loss modeling of the indoor 2.4 GHz channel. We measured variation of the received signal strength between the sender and receiver of which separation was increased from 1 to 30m. The path-loss exponent and the standard deviation of wireless channel were determined by fitting of the measured data. By using the PRR(Packet Reception Rate) of this model. Wireless sensor channel is defined CR(Connect Region), DR(Disconnected Region). In order to verify the characteristics of wireless channel, we performed simulations and experiments. We demonstrated that connection ranges are 24m in indoor, and 14m in outdoor.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.12
• /
• pp.27-34
• /
• 2013

In wireless sensor networks, sensors need to communicate with each other to send their sensing data to the administration node and so they are susceptible to many attacks like garbage packet injection that cannot be prevented by using traditional cryptographic approaches. A behavior-based detection is used to defend against such attacks in which some specialized monitoring nodes overhear the communications of their neighbors to detect bad packets. As monitoring nodes use more energy, it is desirable to use the minimal number of monitoring nodes to cover the whole or maximal part of the network. The monitoring nodes can either be selected among the deployed normal nodes or differ in type from normal nodes. In this study, we have developed an algorithm for selecting the predefined number of monitoring nodes needed to cover the maximum number of normal nodes when the different types of normal nodes and monitoring nodes are deployed. We also have investigated experimentally how the number of monitoring nodes and their transmission range affect the connection ratio of the monitoring nodes and the coverage of the normal nodes.

• Convergence Security Journal
• /
• v.17 no.5
• /
• pp.87-92
• /
• 2017

MANET is a network composed itself because mobile nodes are connected wirelessly. It has been applied to various fields for group communication. However, the dynamic topology by the movement of the nodes causes routing failure frequently because it is difficult to maintain the position information of the nodes participating in the group communication. Also, it has a problem that network performance is decreased due to high overhead for managing information of member nodes. In this paper, we propose a multicast technique using location-based 2-tier virtual group that is flexible and reliable in management of member nodes. The network is composed of cellular zones and the virtual group is constructed using the location information of the nodes in the proposed technique. The virtual group management node is selected to minimize the overhead of location information management for member nodes in the virtual group. In order to improve the reliability for management of member nodes and multicast data transmission, it excludes the gateway node with low transfer rate when setting the route after the packet transmission rate of the member nodes is measured. The excellent performance of the proposed technique can be confirmed through comparative experiments with AMroute method and PAST-DM method.

• Journal of Practical Engineering Education
• /
• v.10 no.2
• /
• pp.81-87
• /
• 2018

During the major sections of the network, Software-defined network control technology for the network area corresponding to the transmission network is becoming a change in network-controlled environments utilizing network operation and provisioning across the network industry. Currently development is underway along with the deployment of PTN equipment and configuration for provisioning is being phased out. It is actively introducing establishment of SDN-based control system while constructing provisioning of PTN equipment from actual commercial network. Therefore, in this thesis, we are going to look at the contents and trends of SDN systems in packet-based transmission networks based on PTN and use them in research on OpenDaylight, an open source for configuring SDN. It then Network Operator will study the software defined control techniques for operational education.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.12
• /
• pp.5723-5743
• /
• 2018

The evolving internet-based services demand high-speed data transmission in conjunction with scalability. The next generation optical network has to exploit artificial intelligence and cognitive techniques to cope with the emerging requirements. This work proposes a novel way to solve the dynamic provisioning problem in optical network. The provisioning in optical network involves the computation of routes and the reservation of wavelenghs (Routing and Wavelength assignment-RWA). This is an extensively studied multi-objective optimization problem and its complexity is known to be NP-Complete. As the exact algorithms incurs more running time, the heuristic based approaches have been widely preferred to solve this problem. Recently the software-defined networking has impacted the way the optical pipes are configured and monitored. This work proposes the dynamic selection of path computation algorithms in response to the changing service requirements and network scenarios. A software-defined controller mechanism with a novel packet matching feature was proposed to dynamically match the traffic demands with the appropriate algorithm. A software-defined controller with Path Computation Element-PCE was created in the ONOS tool. A simulation study was performed with the case study of dynamic path establishment in ONOS-Open Network Operating System based software defined controller environment. A java based NOX controller was configured with a parent path computation element. The child path computation elements were configured with different path computation algorithms under the control of the parent path computation element. The use case of dynamic bulk path creation was considered. The algorithm selection method is compared with the existing single algorithm based method and the results are analyzed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.6
• /
• pp.143-148
• /
• 2007

In the context of mass traffic, firewall system cannot record normal log files against DDoS attack. The loss of log record causes that a firewall system does not know whether a packet is normally filtered or not, and firewall log, which is an essential data for the counter measure of violation accident, cannot be verified as trusted. As a network speed increases, these problems happen more frequently and largely. Accordingly, the method to use simply additional hardware devices is not recommended for the popularization of firewall. This paper is devoted to verify the loss of iptable log that is the mother's womb of most domestic firewall systems and show that the log handling methods for conventional firewall systems are needed to improve.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.5
• /
• pp.83-91
• /
• 2008

IISO/IEC 9594-8 defines the public key framework and attribute certificate framework. Attribute certificate framework deals with privilege management infrastructure(PMI). In PMI, for privilege management using attribute certificates, role assignment certificates and role specification certificates are used to assign and specify privileges independently. Role specification certificates includes privilege specifications and the details far privilege management of network environments. Privilege management of unreliable network environment tries to enhance the reliability and efficiency of privilege information transmission forwarding over unreliable routes in the presence of potentially faulty nodes and edges. Each node forms a role specification tree based on role specification relationship data collected from the network. In this paper privilege management cost with the role specification certificates tree structure is evaluated trying to reduce the overhead incurred by role creation and modification of privileges. The multicasting of packets are used for scalability. We establish management cost model taking into account the packet loss and node reliability which continuously join and leave for network. We present quantitative results which demonstrate the effectiveness of the proposed privilege management scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.11
• /
• pp.4244-4274
• /
• 2021

The utilization of UAVs in various fields has led to the development of flying ad hoc network (FANET) technology. In a network environment with highly dynamic topology and frequent link changes, the traditional routing technology of FANET cannot satisfy the new communication demands. Traditional routing algorithm, based on geographic location, can "fall" into a routing hole. In view of this problem, we propose a geolocation routing protocol based on multi-agent reinforcement learning, which decreases the packet loss rate and routing cost of the routing protocol. The protocol views each node as an intelligent agent and evaluates the value of its neighbor nodes through the local information. In the value function, nodes consider information such as link quality, residual energy and queue length, which reduces the possibility of a routing hole. The protocol uses global rewards to enable individual nodes to collaborate in transmitting data. The performance of the protocol is experimentally analyzed for UAVs under extreme conditions such as topology changes and energy constraints. Simulation results show that our proposed QLGR-S protocol has advantages in performance parameters such as throughput, end-to-end delay, and energy consumption compared with the traditional GPSR protocol. QLGR-S provides more reliable connectivity for UAV networking technology, safeguards the communication requirements between UAVs, and further promotes the development of UAV technology.