• Archives of Plastic Surgery
• /
• v.43 no.1
• /
• pp.84-87
• /
• 2016

Titanium micro-mesh implants are widely used in orbital wall reconstructions because they have several advantageous characteristics. However, the rough and irregular marginal spurs of the cut edges of the titanium mesh sheet impede the efficacious and minimally traumatic insertion of the implant, because these spurs may catch or hook the orbital soft tissue, skin, or conjunctiva during the insertion procedure. In order to prevent this problem, we developed an easy method of inserting a titanium micro-mesh, in which it is wrapped with the aseptic transparent plastic film that is used to pack surgical instruments or is attached to one side of the inner suture package. Fifty-four patients underwent orbital wall reconstruction using a transconjunctival or transcutaneous approach. The wrapped implant was easily inserted without catching or injuring the orbital soft tissue, skin, or conjunctiva. In most cases, the implant was inserted in one attempt. Postoperative computed tomographic scans showed excellent placement of the titanium micro-mesh and adequate anatomic reconstruction of the orbital walls. This wrapping insertion method may be useful for making the insertion of titanium micro-mesh implants in the reconstruction of orbital wall fractures easier and less traumatic.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1982-1984
• /
• 1996

In this paper, we have evaluated the physical characteristicsof the Pt/Cr bilayer, fabricated the micro hot plate by using the Pt/Cr bilayer and E-beam evaporated oxide as a passivation layer, and simulated the thermal distribution by using the commercial software FIDAP. From the researches the sheet resistance of Pt/Cr bilayer didn't be affected by the Cr layer thickness. This results was considered due to the Cr-oxide resided at the interface between Pt and Cr layer. After manufacturing the hot plate, we measured its temperature by type k thermo-couple and I.R. thermo-vision system. In those experiments, the emission coefficient( ${\varepsilon}$ ) of the E-beam evaporated oxide was 0.5 and the temperature of centural region was reached about $305\;^{\circ}C$ at 1.3 watts. The temperature simulation obtained by FIDAP commercial package stewed that the temperature of centural region was about $311\;^{\circ}C$ after 5 sec.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.392-392
• /
• 2000

This study performs optimization of paper mill scheduling using MINLP(Mixed-Integer Non-Linear Programming) method and 2-step decomposing strategy. Paper mill process is normally composed of five units: paper machine, coater, rewinder, sheet cutter and roll wrapper/ream wrapper. Various kinds of papers are produced through these units. The bottleneck of this process is how to cut product papers efficiently from raw paper reel and this is called trim loss problem or cutting stock problem. As the trim must be burned or recycled through energy consumption, minimizing quantity of the trim is important. To minimize it, the trim loss problem is mathematically formulated in MINLP form of minimizing cutting patterns and trim as well as satisfying customer's elder. The MINLP form of the problem includes bilinearity causing non-linearity and non-convexity. Bilinearity is eliminated by parameterization of one variable and the MINLP form is decomposed to MILP(Mixed-Integer Linear programming) form. And the MILP problem is optimized by means of the optimization package. Thus trim loss problem is efficiently minimized by this 2-step optimization method.

• Transactions of Materials Processing
• /
• v.17 no.4
• /
• pp.249-256
• /
• 2008

Combined phase transformation and heat transfer was considered on the simulation of hot press forming process, using material properties modeler, $JMatPro^{(R)}$ and a finite element package, $DEFORM^{TM}$-HT. In order to obtain high temperature mechanical properties and flow curves for different phases, a material properties modeler, $JMatPro^{(R)}$ was used, avoiding expensive and extensive high temperature materials tests. The results successfully show that the strength of hot press forming parts may exhibit different strength in the same parts, depending on the contact of blank with tooling. It was also shown effectively that the strength of the parts can be controlled by designing appropriate cooling paths and coolants. This was shown in terms of different heat convection coefficient in the calculation. Overall, current combination of software was shown to be an effective tool for the tool and process design of hot forming process, although the material modeler needs to be additionally verified by an appropriate set of high temperature materials test.

• The Korean Journal of Emergency Medical Services
• /
• v.23 no.3
• /
• pp.123-134
• /
• 2019

Purpose: This study aimed to analyze the number of patients with and without medical history transported to the emergency department due to changes in daily temperature and season. Methods: Data on emergency activity sheet and daily weather were collected from March 2016 to February 2017 in the city of Gyeonggi-do. In total, 13,531 patients were transferred to the emergency department in 119 ambulance. Data were analyzed using the Statistical Package for the Social Sciences (version 21). Results: The daily average number of patients transferred was the highest in August and September, i.e., the summer season. The higher the daily highest and lowest temperatures, higher the daily average number of patients transferred. In contrast, patients with medical history of hypertension, diabetes, heart disease, cerebrovascular disease, and pulmonary disease had a higher incidence of transfers in the winter season and on days with lower temperature. Conclusion: The results indicate that as people become more active during the summer when temperatures are high, the chances of daily emergencies increases, whereas patients with medical history are more likely to experience emergencies when the temperatures were lower. Hence, 119 ambulances will have to be prepared in advance to deal with this trend.

• Journal of Korean Society for Quality Management
• /
• v.30 no.4
• /
• pp.86-93
• /
• 2002

There are many different factors used in calculating control limits of control chart for variable data. Specially these factors are divided into two groups such as "no given standard" and "given standard"(namely, for analysis and management), but many kind of factors give rise to confusion. Therefore, It is necessary to manifest relationships among factors for easy application regardless of subgroup size. Many SQC textbooks show us plainly these factors, but do not have enough for adequate explanation of relationships among factors. Besides, notation of these factors of SQC textbook isn't coincide with another one, so necessity to the coincidence for the notation of the factors is highlighted during my work recently. In this study, the close examination about relationships among various factors (A-A3, B3-B6, D1-D4, C4, d2, d3 etc) was carried out. Spread sheet results are presented for getting factors according to subgroup size, by grouping as the case of "no given standard" and "given standard". How are these factors to be applied in statistical package (ex, Minitab) have been analyzed using a series of sample data. analyzed using a series of sample data.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.10
• /
• pp.931-939
• /
• 2010

A dash panel plays an important role to protect noise as well as heat. Meanwhile, it is also the most important path that transfers energy to the interior cavity, so that some of noises are transferred via air and its structural vibration becomes a major issue. From the viewpoint of NVH performance, simplified structures analogues to the dash wall are dealt with. Stiffeners, damping sheets and sound packages attached to a flat panel are taken into account as design variables. Structural radiation characteristics(thus, structure borne) such as radiation efficiency and radiation power are mainly discussed. For the case when an excitation is applied on a frame that surrounds the panel, it is shown that the radiation efficiency increases by attaching a stiffener to the panel, which is similarly found from the case when a panel is directly excited. It seems more effective to attach damping sheets along the boundary area of the panel rather than its middle area. The radiation efficiency of sound packages may make a dominant contribution to transmission loss as well as sound radiation. Experimental work was carried out to verify the results based on the simulation study.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.343-354
• /
• 2012

The purpose of this research was to compare the concentration variation between the sport talented children who have been applied with a sport program and the ordinary children who did not. The experiment group was composed of 59(male:32, female:27) sport talented children who were selected from the center of Busan University sport talent in April 2010. The control group was made up of 148 students who participated in 3 elementary schools located in Busan. Among these ordinary students 80 participants were finally used, as some of the students were excluded who were playing as athlete or studying in Science gifted program, FAIR concentration test sheet was used for this study, which was reformed for Korean version by Oh(2002). Covariance analysis was applied for using SAS 9.1 package, and the following conclusions were drawn. First, both the sport talented group and ordinary group of FAIR concentration's 3 subfactors were improved significantly after 8 months. Second, no difference between the sport talent group and ordinary group were found in the variations of post test of concentration's 3 subfactors. Especially there was no difference among groups in oneway-ANOVA using data of post test.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.6
• /
• pp.959-969
• /
• 1997

This research is intended to help the development of new products and marketing strategies studying consumers' knowledge level and attitude towards original brand and the extension attitude related to the brand image. The detailed purposes of this study are as follow: First, it is to measure consumers' knowledge and attitude towards original brand. Second, it is to clarify the dimensions of the image about the original brand and extended brand product which is perceived by the consumer. Third, it is to meassure image consistency and product similarity between the original brand and extended product. The sample group consisted of female college students 393 in Seoul. Stratified sampling, based on major and grade of sturients and the structure of the college they were attending was used as sampling method. Questionnaires, which were selected from literature and proceeding researches published in Korea and abroad, were modified for this study, SAS Package was used for data analysis. The results observed in this study were as follow: 1. Consumers' knowledge level about original brand showed high among students majoring in clothing-related subjects and their general attitude proved to be positive. 2. Image factors of original brand were classified to dignity factor, personality/modernity factor, femininity factor, and ornamentation factor. Lipstick is considered to have high image consistency and product similarity. 3. Comparing the attitude before and after extension, extension to lipstick which showed high image consistency and product similarity received more positive reactions than one to bed cover sheet. 4. It was founded that although knowledge and attitude towards original brand with image consistency had no influence on the extension attitude, knowledge and attitude without image consistency influence the extension attitude.