Browse > Article
http://dx.doi.org/10.5050/KSNVE.2010.20.10.931

Study on Acoustical Radiation from Simplified Systems of a Dash Structure for NVH Performance  

Lim, Cha-Sub (현대자동차 기능시험1팀)
Yoo, Ji-Woo (현대기아자동차 해석기술팀)
Park, Chul-Min (현대자동차 해석기술팀)
Jo, Jin-Ho (NVH Korea(주) 시험평가팀)
Publication Information
Transactions of the Korean Society for Noise and Vibration Engineering / v.20, no.10, 2010 , pp. 931-939 More about this Journal
Abstract
A dash panel plays an important role to protect noise as well as heat. Meanwhile, it is also the most important path that transfers energy to the interior cavity, so that some of noises are transferred via air and its structural vibration becomes a major issue. From the viewpoint of NVH performance, simplified structures analogues to the dash wall are dealt with. Stiffeners, damping sheets and sound packages attached to a flat panel are taken into account as design variables. Structural radiation characteristics(thus, structure borne) such as radiation efficiency and radiation power are mainly discussed. For the case when an excitation is applied on a frame that surrounds the panel, it is shown that the radiation efficiency increases by attaching a stiffener to the panel, which is similarly found from the case when a panel is directly excited. It seems more effective to attach damping sheets along the boundary area of the panel rather than its middle area. The radiation efficiency of sound packages may make a dominant contribution to transmission loss as well as sound radiation. Experimental work was carried out to verify the results based on the simulation study.
Keywords
Dash Panel; Radiation Efficiency; Radiation Power; Damping Sheet; Sound Package; Transmission Loss (TL);
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Liu, B., Fenga, L. and Nilsson, A., 2007, “Sound Transmission Through Curved Aircraft Panels with Stringer and Ring Frame Attachments,” Journal of Sound and Vibration, Vol. 300, pp. 949-973.   DOI
2 VA One, User’s Manual, 2010.
3 Kamura, T., Utsunomiya, A., Sugihara, T. and Tobita, K., 1997, “Improvement of Road Noise by Reduction of Acoustic Radiation from Body Panels,” JSAE9741126.
4 Kato, T., Hoshi, K. and Umemura, E., 1999, “Application of Soap Film Geometry for Low Noise Floor Panels,” SAE 1999-01-1799.
5 Glandier, C. Y., Lehmann, R., Yamamoto, T. and Kamada, Y., 2005, “Vibro-acoustic FEA Modelling of Two-layer Trim Systems,” SAE 2005-01-2325.
6 Xie, G., Thompson, D. J. and Jones, C. J. C., 2005, “The Radiation Efficiency of Baffled Plates and Strips,” Journal of Sound and Vibration, Vol. 280, pp. 181-209.   DOI
7 Maidanik, G., 1962, “Response of Ribbed Panels to Reverberant Acoustic Fields,” J. Acoust. Soc. Am., Vol. 34, pp. 809-826.   DOI
8 Yoo, J. W., 2009, “Sound Radiation Characteristics of Rectangular Plates with a Guided Edge Condition,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 19, No. 9, pp. 1598-2785.
9 Tarnoczy, T., 1970, “Vibration of Metal Plates Covered with Vibration Damping Layers,” Journal of Sound and Vibration, Vol. 11, pp. 299-307.   DOI
10 Park, C. M., Chae, K. S., Yoo, J. W. and Kang, Y. J., 2010, “A Study on Material Properties of Porous Materials,” Proceedings of the Acoustical Society of Korea Conference.