• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.25-33
• /
• 2003

A burr has been defined as undesirable projection of material formed as a result of plastic flow from a cutting or shearing operation. It is unavoidable in all kinds of machining operation. As a result, burr makes troubles on manufacturing process due to deburring cost, quality of products and productivity. In this study, the primary interest is about exit burr. The burr formation mechanism in each type of burr is classified. Data bases are developed to predict burr formation result. In the milling operation, we develop an algorithm to analyze the burr formation mechanism by the geometrical analysis on the multi featured workpiece with multi cutting path. The algorithm includes three steps, i. e., the feature identification, the cutting condition identification, and the analysis on exit burr formation. We can predict which portion of workpiece would have the exit burr in advance so that we can manage to find a way to minimize the exit burr formation in an actual cutting. Also, this algorithm can be implemented in a commercial CAM package so that we can simulate the NC code to review the burr formation in advance.

• 한국주조공학회지
• /
• 제38권2호
• /
• pp.41-47
• /
• 2018

In a numerical study, equations relating the mechanical properties and cooling rate in a casting process have been applied to an AC4CH cast aluminum alloy. Good agreement was found between the measured and predicted material properties. Step-shaped steel blocks were made to comprise a casting mold with a Y-shaped cavity. Thermometers were inserted into each step of the mold to investigate temperature changes. The microstructure and mechanical properties, such as hardness and tensile stress were measured for each cut of piece. The correlation between the cooling rate and SDAS was found by curved fitting. Moreover, both the solidification time and the temperature were simulated using a commercial package, ZCast. The simulation results for yield strength, tensile strength, elongation, and hardness were compared with experimental results. Using the estimated K and n values, the hardness values of a ship propeller were simulated, and the results were similar to those obtained for actual castings.

• 대한치과기공학회지
• /
• 제35권2호
• /
• pp.89-95
• /
• 2013

Purpose: The purpose of this study was to evaluate bond strength of Metal Disk alloy and casting alloy. Methods: Metal specimens were divided into 4 groups for each alloy. Three point flexural test were used to measure the bond strength of CAD/CAM metal alloy and casting alloy. Statistical analysis was done using the Statistical Package for Social Sciences version 19.0 for Windows. As for the analysis methods, the study used Kruskal-Wallis test. Results: The average bonding strengths of Group 1 to porcelain was $36.7{\pm}9.90$ MPa, Group 2 to porcelain was $37.68{\pm}4.51$ MPa, Group 3 to porcelain was $36.43{\pm}6.57$ MPa, Group 4 to porcelain was $42.88{\pm}6.81$ MPa, Each group was not significantly different. Conclusion: Bond strength of Casting alloy is equal to or higher than bond strength of CAD/CAM Metal Disk alloy. Alloy clinical bond strength is 25 MPa, So CAD/CAM Metal Disk alloy can be used as dental material.

• Transactions on Electrical and Electronic Materials
• /
• 제16권4호
• /
• pp.201-205
• /
• 2015

This paper dealt with the condensing technology of an LED light source that uses a parabolic reflector to replace a searchlight equipped with a xenon lamp. A ray-tracing simulation was conducted to analyze the influence of the diameter of the reflector and the size of the light source on light condensing. The combination of a parabolic reflector with a diameter of 620 mm and a focal distance of 220 mm, and a 9 mm multi-chip package (MCP) with a luminous flux of 7,000 lm showed the narrowest beam angle. The luminous intensity at the center was measured at 7.7×10⁶ cd. The distance between the light source and the point where the illuminance was 1 lx was calculated to be 2.8 km. The power consumption of the system was 95 W, which is only 9.5% of that of the 1 kW xenon searchlight, and the beam angle was 1.03°. In a site experiment, it was confirmed that the light ray reflected from the LED searchlight proceeds forward without any diffusion because of the narrow beam angle.

• 반도체디스플레이기술학회지
• /
• 제5권3호
• /
• pp.5-10
• /
• 2006

This paper investigates cutting qualities after laser dicing and predicts the problems that can be generated by laser dicing. And through 3 point bending test, die strength is measured and the die strength after laser dicing is compared with the die strength after mechanical sawing. Laser dicing is chiefly considered as an alternative to overcome the defects of mechanical sawing such as chipping on the surface and crack on the back side. Laser micromachining is based on the thermal ablation and evaporation mechanism. As a result of laser dicing experiments, debris on the surface of wafer is observed. To eliminate the debris and protect the surface, an experiment is done using a water soluble coating material and ultrasonic. The consequence is that most of debris is removed. But there are some residues around the cutting line. Unlike mechanical sawing, chipping on the surface and crack on the back side is not observed. The cross section of cutting line by laser dicing is rough as compared with that by mechanical sawing. But micro crack can not be seen. Micro crack reduces die strength. To measure this, 3 point bending test is done. The die strength after laser dicing decreases to a half of the die strength after mechanical sawing. This means that die cracking during package assembly can occur.

• Journal of Ginseng Research
• /
• 제33권4호
• /
• pp.337-342
• /
• 2009

The extraction conditions for the production of red ginseng polysaccharide were proposed. The crude fiber content of red ginseng marc (RGM) (15.3%) was much higher than that of white ginseng (WG) (2.1%) and red ginseng (RG) (0.5%). Thus, RGM was selected as the raw material for polysaccharide production. The correlation between the particle size of RGM and the polysaccharide extraction was investigated with a correlation analysis using the SPSS package. The two parameters were found to have a significant correlation (p<0.01). The polysaccharide extraction increased as the particle size of RGM decreased. The optimal concentration of RGM was 6.66% (w/v). The extraction yield increased as both the extraction temperature and the extraction time increased. Finally, the extraction temperature and time were selected as $85^{\circ}C$ and 5 hrs, respectively. Consequently, the extraction conditions for polysaccharide production were optimized and statistically confirmed.

• 한국정보통신학회논문지
• /
• 제3권3호
• /
• pp.559-567
• /
• 1999

결합형 유한요소-경계요소 기법을 사용하여 압전체 유연형 쏘나 변환기를 시뮬레이션하였다. 쏘나 변환기의 역학적 구동을 3차원적으로 모델링하였고 전기적 외부 부하 조건을 가지고 분석하였다. 정상 상태 변위 모드, 방향 패턴, 공진 주파수, 대역,0-factor, 출력 압력, TV 응답과 같은 결과들을 보여준다. 본 논문의 술통 형태의 압전 재질 쏘나 변환기는 유연한 변위를 발생시키며, 다른 형태의 쏘나 변환기와 달리 고출력, 낮은 Q-factor, 향상된 전방위성을 가지도록 해준다. 본 연구에서 개발된 쏘나 변환기 모델링의 결과를 ATILA와 같은 상업적 소프트웨어와 비교하였다.

• 한국주조공학회지
• /
• 제31권4호
• /
• pp.205-211
• /
• 2011

Al-Si alloys have been steadily used as a potential material for the achievement of an efficient weight reduction in the automobile and aerospace industries due to its excellent castability and high strength-to-weight ratio. In this study, riser effect and mechanical properties were investigated according to the size of the sleeve. In addition, the effects of riser size on mechanical properties of castings were investigated. On the other hand flow and solidification process were simulated with a hybrid FDM/FEM package named ZCast. As a result, results of simulation and experiments were comparable regarding to the yield strength, tensile strength, elongation and hardness of casting. It proves the reliability of the simulation. It is expected that the proper size of riser can improve the recycling rate of metallic materials and reduce the cost of casting.

• 대한안전경영과학회지
• /
• 제11권1호
• /
• pp.115-120
• /
• 2009

Single PPM Quality Innovation Movement is originally developed quality program in Korea for supplier's quality level-up since 1995. The quality target is below the 10ppm(parts per million) in outgoing quality and delivered goods plus field claim. This Single PPM Quality Innovation Movement program was conducted to realize the anticipated results not only due to management result level's increasing, but also the company's confidence and competitiveness. This study attempted to find the mutual influences on the participation of the constituent members, satisfaction of the constituent members and results of the management from Single PPM Quality Innovation Movement. The reliance analysis for the measurement material on the questionnaire was verified by Cronbach's alpha coefficient. Participation of the constituent members, satisfaction of the constituent member and result of the management, the influences upon Single PPM improvement degree level were verified through the structural analysis by using SPSS statistic package. The influence evaluation among the groups was evaluated by the structure equation.

• 복식문화연구
• /
• 제10권5호
• /
• pp.504-517
• /
• 2002

The purposes of this study were to analyze the lifestyle of women in their 50's and 60's and to provide the basis fur the efficient strategy of silver market by classifying women in their 50's and 60's according to lifestyle types and investigating the effect of consumers' lifestyle and demographic characteristics on consumers' clothing evaluation criteria and buying place. In this study, a selfㆍadministered questionnaire was distributed to women in their 50's and 60's. 226 questionnaires of 350 were used in the following analysis. The data were analyzed with the SPSS package. The results of this study were as follows. First, lifestyle were analyzed to find out the underlying factors, and then the subjects were grouped according to factor scores by the cluster analysis. Four lifestyle types were defined. They were the traditional family-oriented, the ostentatious purchase, the economical material-oriented, the active economics-oriented type. Second, a consumer's clothing evaluation criteria were classified according to three characteristics - aesthetic, practical and ostentatious. A consumer's clothing evaluation criteria were significantly different depending on the consumer's lifestyle and demographic characteristics. All lifestyle types except ostentatious purchase type considered practical characteristic like easiness of washing/care, harmony with other clothing, quality and price. The higher education, income and clothing expense, the more a customer considered ostentatious characteristic like fashionability and reputation of brand in selection of clothing.