• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.53-58
• /
• 2003

The Wafer Level Packaging is one of the most important technologies in the semiconductor industry today. Its primary advantages are its small form factor and low cost potential for manufacturing including test procedure. The CASIO's WLP samples, application example and the structure are shown in Fig.1, 2&3. There are dielectric layer , under bump metal, re-distribution layer, copper post , encapsulation material and terminal solder .The key technologies are 'Electroplating thick copper process' and 'Unique wafer encapsulation process'. These are very effective in getting electrical and mechanical advantages of package. (Fig. 4). CASIO and CMK are developing a new System Packaging technology called the Embedded Wafer Level Package (EWLP) together. The active components (semiconductor chip) in the WLP structure are embedded into the Printed Wiring Board during their manufacturing process. This new technical approach has many advantages that can respond to requirements for future mobile products. The unique feature of this EWLP technology is that it doesn't contain any solder interconnection inside. In addition to improved electrical performance, EWLP can enable the improvement of module reliability. (Fig.5) The CASIO's WLP Technology will become the effective solution of 'KGD problem in System Packaging'. (Fig. 6) The EWLP sample shown in Fig.7 including three chips in the WLP form has almost same structure wi_th SoC's. Also, this module technology are suitable for RF and Analog system applications. (Fig. 8)

• Journal of Welding and Joining
• /
• 제16권4호
• /
• pp.92-97
• /
• 1998

Because of the low melting temperature of solder, each temperature cycle initiates an irrecoverable creep deformation at the solder interconnection which connects the package body with the PCB. The crack starts and propagates from the position where the creep deformation is maximized. This work has tried to compare and analyze the thermal fatigue life of solder interconnection which is affected by the lead material, the size of die pad, chip thickness, and interface delamination of 48-Pin TSOP under the temperature cycle ($0^{\circ}C$~1$25^{\circ}C$). The crack initiation position and thermal fatigue life which are calculated by using FEA method are well matched with the results of experiments. The thermal Fatigue life of copper lead frame is extended around 3.6 times longer than that of alloy 42 lead frame. It is maximized when the chip size is matched with the length of the lead. It tends to be extended as the thickness of chip got thinner. As the interfacial delamination between die pad and EMC is increased, the thermal fatigue life tends to decrease in the beginning of delamination, and increase after the delamination grew after 45% of the length of die pad.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2038-2042
• /
• 2010

In this paper, we confirmed the thermal & optical properties for improving the heat transfer coefficient by changing the via hole size and in FR4 PCB with the same area. Osram 1W power LED Package (Golden Dragon) was used and the K-factor which is relative constant between LED junction temperature and forward bias was measured with power source meter(KEITHLEY 2430) to measure the thermal resistance from PCB configuration. As results, thermal resistance in metal PCB came out to the lowest as $26 [^{\circ}C/W]$ and thermal resistance in FR4 PCB without via-holes emerged as the highest as $69 [^{\circ}C/W]$. However thermal resistance of FR4 PCB could have decreased until $32[^{\circ}C/W]$ in 0.6 mm by using the via hole. Also, the luminous flux could have improved, too.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.3334-3340
• /
• 2011

본 연구에서는 GTL (Gas To Liquids) 파일럿 공정의 설계를 위한 아민 수용액을 이용한 이산화탄소 제거공정에 대한 전산모사를 수행하였다. 이산화탄소 제거를 위한 용매로써 30wt% DEA(diethanol amine) 수용액을 사용하였으며, 공정 배열은 흡수탑과 탈거탑의 2기의 column을 사용하였다. 전산모사를 위해서 Invensys사의 PRO/II with PROVISION 9.0을 사용하였으며 열역학 모델식으로는 amine special package내의 Kent-Eisneberg 모델식을 사용하였다. 전산모사를 통해서 이산화탄소 제거공정에 대한 열 및 물질수지를 도출하였으며, 흡수탑과 탈거탑에 대한 충진탑의 직경과 높이를 산출하였다.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.149-153
• /
• 2019

The technology of electronic packaging among semiconductor technologies is evolving as an axis of the market in its own field beyond the simple assembly process of the past. In the field of electronic packaging technology, the packaging of power modules plays an important role for green electric vehicles. In this power module packaging, the thermal reliability is an important factor, and silicon nitride plays an important part of package substrates, Silicon nitride is a compound that is not found in nature and is made by chemical reaction between silicon and nitrogen. In this study, this core material, silicon nitride, was fabricated by reaction bonded silicon nitride. The fabricated silicon nitride was studied for thermo-mechanical properties, and through this, the structure of power module packaging was made using reaction bonded silicon nitride. And the characteristics of stress were evaluated using finite element analysis conditions. Through this, it was confirmed that reaction bonded silicon nitride could replace the silicon nitride as a package substrate.

• Steel and Composite Structures
• /
• 제43권5호
• /
• pp.533-552
• /
• 2022

The current article deals with the dynamic stability, and structural improvement of vibrating electrically curved screen on the viscoelastic substrate. By considering optimum value for radius curvature of the electrically curved screen, the structure improvement of the system occurs. For modeling the electrically system, the Maxwell's' equation is developed. Hertz contact model in employed to obtain contact forces between impactor and structure. Moreover, variational methods and nonlinear von Kármán model are used to derive boundary conditions (BCs) and nonlinear governing equations of the vibrating electrically curved screen. Galerkin and Multiple scales solution approach are coupled to solve the nonlinear set of governing equations of the vibrating electrically curved screen. Along with the analytical solution, 3D finite element simulation via ABAQUS package is provided with the aid of a FE package for simulating the current system's response. The results are categorized in 3 different sections. First, effects of geometrical and material parameters on the vibrational performance and stability of the curves panel. Second, physical properties of the impactor are taken in to account and their effect on the absorbed energy and velocity profile of the impactor are presented. Finally, effect of the radius and initial velocity on the mode shapes of the current structure is demonstrated.

• International Journal of Advanced Culture Technology
• /
• 제11권3호
• /
• pp.163-171
• /
• 2023

A blind box is a kind of sales method in that you can only get the product information by opening the package. In 2019, blind box products began to grow rapidly in the Chinese market, and gradually formed a special "blind box economy". The particularity of blind box products is that driven by consumers' curiosity, consumers' purchasing behavior can be directly induced by the visual and tactile perception of commodity packaging. Therefore, it is necessary to explore the psychological needs of consumers and master the blind box packaging design elements under the influence of consumer psychology. This paper takes figurine blind box packaging elements as the research scope and Chinese blind box consumers as the research object. Through market research and literature study, We are designed to conduct a questionnaire survey and SPSS empirical study to find out the differences in the preferences of different consumer temperament types for blind box packaging, taking the characteristics of blind box products and consumer psychology as the relevant theoretical background. The research results show that among the blind box consumers, choleric type consumers predominate, the color of the blind box packaging presents red, orange, and yellow preference, and the material presents metal, and plastic preference. The shape of the blind box shows a preference for special shape.

• 센서학회지
• /
• 제32권4호
• /
• pp.207-212
• /
• 2023

H₂S is a toxic and harmful gas, even at concentrations as low as hundreds of parts per million; thus, developing an H₂S sensor with excellent performance in terms of high response, good selectivity, and fast response time is important. In this study, an H₂S sensor with a high response and fast response time, consisting of a sensing material (SnO₂), an electrode, a temperature sensor, and a micro-heater, was developed using micro-electro-mechanical system technology. The developed H₂S sensor with a micro-heater (circular type) has excellent H₂S detection performance at low H₂S concentrations (0-10 ppm), with quick response time (<16 s) and recovery time (<65 s). Therefore, we expect that the developed H₂S sensor will be considered a promising candidate for protecting workers and the general population and for responding to tightened regulations.

• 방사성폐기물학회지
• /
• 제5권3호
• /
• pp.199-212
• /
• 2007

IP-2형 운반용기는 정상운반조건에서의 자유낙하시험 및 적층시험을 수행한 후에 운반내용물의 분산 및 유실이 없어야 하며 외부표면에서의 방사선량률이 20%이상 증가할 수 있는 차폐능력의 상실이 없어야 한다. 본 연구에서는 두꺼운 철판을 구조재로 사용하며 볼트체결방식의 뚜껑을 가진 IP-2형 운반용기에 대한 구조 안전성을 평가하기 위한 해석적인 방안을 제안하였다. 해석적인 방법을 통하여 원자력발전소에서 발생된 방사성폐기물 드럼을 폐기물 처리시설에서 임시저장고까지 운반하기 위한 두 종류의 IP-2형 방사성폐기물 운반용기에 대하여 자유낙하조건에서 운반내용물의 분산 및 유실과 차폐손실이 없음을 확인하였다. 자유낙하조건에서 운반내용물의 분산 및 유실을 평가하기 위하여 최대 볼트단면 평균응력값과 최대 뚜껑열림량을 볼트의 인장강도와 뚜껑부에 존재하는 단차와 비교 평가하였다. 또한 최대 차폐두께 감소량을 이용하여 차폐손실을 평가하였다. 자유낙하조건에 대한 동적충돌해석을 검증하고 구조 안전성을 시험적으로 평가하기 위하여 자유낙하시험을 다양한 방향으로 실시하였다. 자유낙하시험에서는 운반내용물의 분산 및 유실은 볼트체결방식의 뚜껑에서 볼트의 파손 및 플랜지의 변형 등을 검사하여 평가하였으며, 차폐손실은 초음파 두께 측정기를 이용한 차폐두께를 측정하여 평가하였다. 해석에 대한 검증을 위하여 시험에서 취득한 변형률과 가속도를 동일한 위치에서 얻어진 해석결과와 비교하였다. 해석결과는 시험결과에 비하여 보수적인 결과를 보여주므로 해석에서 입증한 IP-2형 방사성폐기물 운반용기의 안전성은 보수적인 결과이다. 마지막으로 유한요소해석을 통하여 적층조건에 대한 IP-2형 방사성폐기물 운반용기는 안전함을 입증하였다.

• 한국재료학회지
• /
• 제26권1호
• /
• pp.22-28
• /
• 2016

In this study, we fabricated high quality color conversion component with green/red phosphor and low melting glass frit. The color conversion component was prepared by placing the green and red phosphor layer on slide glass via screen printing process. The properties of color conversion component could be controlled by changing coating sequence, layer thickness and heat treatment temperature. We discovered that optical properties of color conversion component were generally determined by the lowest layer. On the other hand, the heat treatment temperature also affected to correlated color temperature (CCT) and color rending index (CRI). The color conversion component with a green (lower) - red (upper) layer which was sintered at $550^{\circ}C$ showed the best optical properties: CCT, CRI and luminance efficacy were 3340 K, 78, and 56.5 lm/w, respectively.