• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.5
• /
• pp.811-815
• /
• 1995

Effect of deamidation with Neutrase on the solubility of bovin serum albumin(BSA), egg albumin(EA), soy protein isolate(SPI) was investigated. Solubility of deamidated BSA in distilled water was decreased from 98% to 83% against native BSA at pH 4~8, minimum solubility of deamidated BSA was pH 6. Solubilities of native BSA and deamidated BSA in 0.2M NaCl solution were shown 100% as compared greately decreasing both solubilities in 1.0M NaCl at acidic pH. According to deamidation, solubility of EA in distilled water was increased below pH 4 and above pH 6, while solubility of EA in NaCl solution was decreased by deamidation at acidic pH. Solubility of SPI in distilled water was greately increased by deamidation at overall pH, deamidation was increased solubility in NaCl solution above pH 5. There was, however, no difference on solubility by deamidation below pH 5.

• Korean Journal of Food Science and Technology
• /
• v.22 no.3
• /
• pp.343-349
• /
• 1990

The solubility of protein and phytate was measured at various pH's in distilled water and at various concentrations of NaCl, $CaCl_2\;and\;Na_2SO_3$ solutions, and then optimum condition for producing low phytate protein isolate from perilla flour was investigated. The protein solubility in water showed minimum at pH 4.0 and increased at pH higher or lower than 4.0, while phytate solubility was highest at pH 5.0 and decreased at pH higher or lower than 5.0. In NaCl solution, protein solubility was lowest between pH 3.0-4.0, while phytate solubility was high between pH 2.0-5.0 and abruptly decreased above PH 6.0. In $Na_2SO_3$ solution, protein solubility was lowest between pH 2.0-3.0 and phytate solubility showed maximum values between pH $5.0{\sim}6.0$, and it's solubility was low in 3% salt concentration at all pH ranges. In $CaCl_2$ solution, protein solubility in 3% salt concentration was relatively low at all pH ranges, and phytate solubility showed highest values between pH $2.0{\sim}3.0$ and abruptly decreased (1.0%) above pH 4.0. In order to make low phytate protein isolate, defatted perilla flour protein was extracted at pH9.0 and precipitated at pH 4.0 in 3% NaCl solution. The yield of low phytate protein isolate was 61.4% of total protein. This protein was found to contain 0.02% phytate by weight.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.11
• /
• pp.1608-1615
• /
• 2016

This study was conducted to determine the solubility of copper (Cu) in two sources of copper(II) sulfate ($CuSO_4$) including monohydrate and pentahydrate and three sources of dicopper chloride trihydroxide (dCCTH) including ${\alpha}$-form (dCCTH-${\alpha}$), ${\beta}$-form (dCCTH-${\beta}$), and a mixture of ${\alpha}$- and ${\beta}$-form (dCCTH-${\alpha}{\beta}$) at different pH and a 3-step in vitro digestion assay for pigs. In Exp. 1, Cu sources were incubated in water-based buffers at pH 2.0, 3.0, 4.8, and 6.8 for 4 h using a shaking incubator at $39^{\circ}C$. The $CuSO_4$ sources were completely dissolved within 15 min except at pH 6.8. The solubility of Cu in dCCTH-${\alpha}$ was greater (p<0.05) than dCCTH-${\beta}$ but was not different from dCCTH-${\alpha}{\beta}$ during 3-h incubation at pH 2.0 and during 2-h incubation at pH 3.0. At pH 4.8, there were no significant differences in solubility of Cu in dCCTH sources. Copper in dCCTH sources were non-soluble at pH 6.8. In Exp. 2, the solubility of Cu was determined during the 3-step in vitro digestion assay for pigs. All sources of Cu were completely dissolved in step 1 which simulated digestion in the stomach. In Exp. 3, the solubility of Cu in experimental diets including a control diet and diets containing 250 mg/kg of additional Cu from five Cu sources was determined during the in vitro digestion assay. The solubility of Cu in diets containing additional Cu sources were greater (p<0.05) than the control diet in step 1. In conclusion, the solubility of Cu was influenced by pH of digesta but was not different among sources based on the in vitro digestion assay.

• Restorative Dentistry and Endodontics
• /
• v.15 no.1
• /
• pp.88-96
• /
• 1990

The purpose of this study was to investigate the fluoride release and solubility of glass ionomer cement associated with three pH media. For this study, GC Fuji II discs (20.0mm in diameter ${\times}$ 1.5mm thick) were immersed in pH 4.0 lactic acid, pH 7.0 distilled water and pH 10.0 KOH solutions for 1, 7, 14 and 28 days. The amount of fluoride release from the cement into three pH media were measured by fluoride specific ion electrode and the solubility was measured by weight loss of discs. The results were as follows: 1. The lower was the pH of media, the more was the amount of release of fluoride. 2. The amount of fluoride release was increased with time lapse. 3. After I day, the solubility was the highest, and after 7 days that was the least. 4. The lower was the pH of media, the more was the solubility, but there was no statistical difference in solubility according to the pH change.

• Applied Biological Chemistry
• /
• v.29 no.2
• /
• pp.212-218
• /
• 1986

Proteins in Korean rapeseeds, as in many other plantseeds, are usually bound to phytate molecules. These phytate-bound proteins are of little value as foodstuffs because of their poor solubility in digestive systems. Therefore it is necessary to remove phytates from proteins in order to convert these proteins io a useful foodstuff. In the work, an efficient procedure for removal of phytates from defatted Korean rapeseed was found. The influence of pH on the solubility of protein and phytate of rapeseed flour showed that the former was the lowest at pH 5.0 and began to increase as pH further raised. Meanwhile, the latter was the highest at pH 6.0, however, it was decreased abruptly at alkaline pH, especially to content of 1.3% at pH 11.5. The solubility cf protein was relatively high in NaCl aqueous solution at $pH\;6.0{\sim}8.0$, and did not male any noticeable difference depending on NaCl concentration. On the other hand, the solubility of phytate was high at pH of below 6.0 showing an abrupt decrease at pH of above 6.0. The solubility of protein in $CaCl_2$ aqueous solution was highest at $pH\;6.0{\sim}8.0$, however, there was no significant change at the whole range of tested pH of the solution. A maximum solubility of phytate was shown at $pH\;3.0{\sim}4.0$. And it was decreased abruptly at a higher pH of the above range and also decreased at a lower pH with higher $CaCl_2$ concentration. The solubility of phytate in $Na_2SO_3$ aqueous solution was highest at $pH\;5.0{\sim}8.0$. As the concentration goes up the maximum value of solubility was found to move to higher pHs. Depending on the concentration of $Na_2SO_3$, the decreasing pattern was changed in an alkaline solution. The solubility of phytate in the solution containing low concentration of $Ca^{2+}$ ion was low in all treatments at pH of above 7.0 and showed the maximum value at low pH as $Ca^{2+}$ ion concentration increases. The solubility of protein at pH 11.5 showed the highest value in $1mM\;Ca^{2+}$ ion solution.

• Korean journal of food and cookery science
• /
• v.9 no.4
• /
• pp.278-283
• /
• 1993

This study was attempted to investigate the effects of enzymatic modification of milk protein with protease on functional properties. The selected functional properties were solubility, emulsifying activity (EA), emulsion stability(ES), foam expansion(FE), and foam stability(FS). These properties were measu-red from pH 3.0 to pH 8.0. The proteases used in this study were iaolated from Meju(fermemted soybean) and had specific activity of 250 units/㎎ protein at pH 7.0, 1600 units of pretense was used for 1gr. of skim milk protein. Skim milk showed 30.5％ degree of hydrolysis for 1 hr. and 36.4% degree of hydrolysis for 3.5 hrs. of protease treatment at pH 7.0. Solubility of native skim milk, control, 1 hr. and 3.5 hrs. groups were 3.37, 3.64, 10.21, 14.34％o at pH 4.0 respcetively. The emulsifying activity of native skim milk, control, 1 hr. and 3.5 hrs. groups were 38.8,42.0,43.0,46.7ft at pH 4.0, respectively. Enzymatic modification resulted in the increase of solubility and emulsifying activity at pH 4.0. However at pH 5.0 emulsifying activity of 1 hr. and 3.5 hr. group were lower than native skim milk and control groups. 1 hr. protease treatment was found to be most effective way of increasing foam expansion at pH 4.0 to 6.0. It was supported that, protease treated skim milk can be used to improve solubility, emulsifying activity, foam expansion at acid pH. meju protease. skim milk, solubility, emulsion, foam.

• Korean journal of food and cookery science
• /
• v.6 no.3 s.12
• /
• pp.9-15
• /
• 1990

Peanut prptein isolate was tested for the purpose of finding out the effect of pH, Sodium Chloride concentration and heat treatment on the solubility, surface hydrophobicity, foam expansion and foam stability. The solubility of peanut protein isolate was affected by pH and showed the lowest value at pH 4.5. When the peanut protein isolate was heated, the solubility decreased at pH 3 and pH 7 but at pH 9 solubility increased. At all pH range, solubility decreased as NaCl was added. The surface hydrophobicity of peanut protein isolate showed the highest value at pH 1.5. Generally, at acidic pH range the surface hydrophobicity was high, but at alkaline region, the surface hydrophobicity increased as the temperature increased. And when NaCl was added, the surface hydrophobicity was also increased. Foam expansion of peanut protein isolate was no significant difference among the values about pH. When the peanut protein was heated and NaCl was added, foam expansion was increased at pH 7. Foam stability was significantly low at pH 4.5 and foam stability was increased at acidic pH region below pH 4.5. At pH 7 and pH 9, heat treatment above $60^{\circ}C$ increased foam stability. When NaCl was added, foam stability was significantly increased at pH 3 and pH 7.

• Korean journal of food and cookery science
• /
• v.9 no.1
• /
• pp.43-51
• /
• 1993

Buckwheat protein isolate was tested for the effects of pH, addition of sodium chloride and heat treatment on solubility, emulsion capacities, emulsion stability, surface hydrophobicity, foam capacities and foam stability. The solubility of buckwheat protein isolate was affected by pH and showed the lowest value at pH 4.5, the isoelectric point of buckwheat protein isolate. The solubility significantly as the pH value reached closer to either ends of the pH, i.e., pH 1.0 and 11.0. The effects of NaCl concentration on solubility were as follows; at pH 2.0, the solubility significantly decreased when NaCl was added; at pH 4.5, it increased above 0.6 M; at pH 7.0 it increased; and at pH 9.0 it decreased. The solubility increased above $80^{\circ}C$, at all pH ranges. The emulsion capacity was the lowest at pH 4.5. It significantly increased as the pH approached higher acidic or alkalic regions. At pH 2.0, when NaCl was added, the emulsion capacity decreased, but it increased at pH 4.5 and showed the maximum value at pH 7.0 and 9.0 with 0.6 M and 0.8 M NaCl concentrations. Upon heating, the emulsion capacity decreased at acidic pH's but was maximised at pH 7.0 and 9.0 on $60^{\circ}C$ heat treatment. The emulsion stability was the lowest at pH 4.5 but increased with heat treatment. At acidic pH, the emulsion stability increased with the increase in NaCl concentration but decreased at pH 7.0 and 9.0. Generally, at other pH ranges, the emulsion stability was decreased with increased heating temperature. The surface hydrophobicity showed the highest value at pH 2.0 and the lowest value at pH 11.0. As NaCl concentrationed, the surface hydrophobicity decreased at acidic pH. The NaCl concentration had no significant effects on surface hydrophobicity at pH 7.0, 9.0 except for the highest value observed at 0.8 M and 0.4 M. At all pH ranges, the surface hydrophobicity was increased, when the temperature increased. The foam capacity decreased, with increased in pH value. At acidic pH, the foam capacity was decreased with the increased in NaCl concentration. The highest value was observed upon adding 0.2 M or 0.4 M NaCl at pH 7.0 and 9.0. Heat treatments of $60^{\circ}C$ and $40^{\circ}C$ showed the highest foam capacity values at pH 2.0 and 4.5, respectively. At pH 7.0 and 9.0, the foam capacity decreased with the increased in temperature. The foam stability was not significantly related to different pH values. The addition of 0.4 M NaCl at pH 2.0, 7.0 and 9.0 showed the highest stability and the addition of 1.0 M at pH 4.5 showed the lowest. The higher the heating temperature, the lower the foam stability at pH 2.0 and 9.0. However, the foam stability increased at pH 4.5 and 7.0 before reaching $80^{\circ}C$.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.1
• /
• pp.33-37
• /
• 2000

One of the methods to increase the solubility of a drug is to use complexation with a cyclodextrin. Due to the hydrophobic nature of the interior cavity of the cyclodextrin, it has been known that undissociated lipophilic drugs can be included within the cyclodextrin by hydrophobic interaction. Recently, inclusion of hydrophilic or dissociated form of a drug has been investigated. In this study, the synergism of pH and complexation with $hydroxypropy-{\beta}-cyclodextrin\;(HP\;{\beta}\;CD)$ to increase the solubility of two oxicam derivatives was investigated. In addition, the effect of partition coefficient of dissociated and undissociated form of the drug on the extent of complexation with HP ${\beta}$ CD was studied. The solubility was measured by equilibrium solubility method. The solubility of tenoxicam and piroxicam increased exponentially with an increase in solution pH above the pKa of the drug in the presence and absence of HP ${\beta}$ CD. The solubility of the drugs increased linearly as a function of HP ${\beta}CD$ concentration at fixed pH. Although the stability constant of ionized species is less than that of the unionized species, the concentration of the ionized drug complex is greater than that of the unionized drug complex due to higher concentration of ionized species at pH 7.3.

• Applied Biological Chemistry
• /
• v.32 no.4
• /
• pp.321-326
• /
• 1989

Nitrogen and phytate solubility of perilla seed flour were influenced by the following factors: pH, centrifugal force, temperature and the presence of salt. The nitrogen solubility of perilla seed flour was minimum$(17.1{\sim}18.0%)$ at the pH range of $(4.0{\sim}5.0)$ and maximum(92.3%) at pH 11.0, while phytate solubility was the highest(48.5%) at pH 4.8 and lowest(8.3%) at pH 11.0. The phytic acid content in the extract decreased with an increase in centrifugal force. However, the nitrogen content was not affected by centrifugal force. The solubility of nitrogen and phytate gradually increased as the temperature was increased from $5^{\circ}C$ to $60^{\circ}C$ The addition of calcium$(0{\sim}50mM)$ at pH 5.0 decreased the phytate solubility, but increased nitrogen solubility. The solubility of nitrogen and phytate of perilla seed protein isolate was gradually increased as pH raised further. The protein and phytate contents of the perilla seed protein isolate were 1.1 and 89.6%, respectively, compared to 5.0 and 60.1% for perilla seed flour.