• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.2
• /
• pp.151-160
• /
• 2022

The sorption of Eu on MX-80 bentonite in Na-Ca-Cl solutions is investigated at a molal proton concentration (pH_m) range of 3 to 10 and an ionic strength (I) range of 0.1 to 6 m (mol·kgw^-1). The sorption equilibrium of Eu on MX-80 is achieved within 14 to 21 d at I = 0.1 and 6 m. The sorption distribution coefficient (K_d) values of Eu for MX-80 increase as pH_m increases from 3 to 6 for all I values, and they are independent of pH_m between 8 and 10 at I ≥ 0.5 m. Meanwhile, at I = 0.1 m, the K_d value at pH_m = 10 is slightly lower than those at pH_m = 8 and 9. The K_d values are not affected by the I values between 0.5 m and 6 m, whereas the K_d value at I = 0.1 m is greater than those at I ≥ 0.5 m, except at pH_m = 10. A two-site protolysis nonelectrostatic surface complexation and cation exchange sorption model is applied to the Eu sorption data for I ≤ 4 m, and the equilibrium constants of the sorption reactions are estimated.

• Food Science of Animal Resources
• /
• v.21 no.3
• /
• pp.200-207
• /
• 2001

Effects of dietary chitosan on physico-chemical properties of pork were investigated. A total 24 pigs (55$\pm$5kg) were fed a control diet (a commercial feed) or chitosan-supplemented diets (T1: 0.2% chitosan, T2: 0.4% chitosan, T3: 0.6% chitosan) for 6 weeks. The 6 weeks later the initiated of the experiments, pigs were slaughtered and loins were collected from each treatment groups. The samples were stored at 0$\pm$1$^{\circ}C$ for 15 days. Ultimate pH tended to higher in the control than those in the treatments, and that of T3 was significantly lower than those of the others (P<0.05). Shear force and the total moisture contents were not significantly different between control and treatments and they decreased with storage days (P<0.05). Hunter L* values of control, T1 and T2 were significantly lower than that of T3 at 1 and 10 days (P<0.05). Hunter a* values of control were significantly higher than that of others at 1 and 5 days (P<0.05). Hunter b* values of control were significantly higher than that of others at 5 days (P<0.05).

• Korean Journal of Soil Science and Fertilizer
• /
• v.2 no.1
• /
• pp.27-30
• /
• 1969

The present notes summarize the results obtained from the effect of soil-solution ratio on pH values of soils having widely different physico-chemical characteristics. The pH was determined in deionized water N-KCl and 0.01 M $CaCl_2$ solution The results obtained are: 1. With deionized water, the pH values increase with the increase in soil-solution ratio. The increase is more in upland soils than in paddy soils. 2. With N-KCl solution, there is also an increase in pH values with the increase in soil-solution ratio but the increase is less than the corresponding increase with deionized water. 3. With 0.01 M $CaCl_2$ solution, there is practically no change in pH values with the increase in soil-solution ratio except for saline soils. 4. In case of saline soils, the pH increase even in case of 0.01 M $CaCl_2$ solution with increase in soil-solution ratio, the reason for increase may be due to decrease of electric potential by high concentration of salts.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.129-135
• /
• 2016

This study is about ionic water generator filter Recently, a lot of people feel deep interest in health and drinking water. Evaluation of the stability of oxidation-reduced potential (ORP) using the filter of the alkaline water. This study utilizes the three filter of activated carbon, UF, carbon block in alkaline reduced water equipment. Passing the water to the filter is evaluated that the OPR values are stability in accordance with the change of the volume in the bucket. Alkaline reduced water equipment is a system that has the function of making the water reduction. This system is the values of the human body beneficial minerals and ORP are made in the functional water has a very low value than general water. Which has passed through the filter the water in the water negative ions and positive ions through the electrolytic. After electrolysis, the cathode side by water, including $Ca^+$, $K^+$, $Mg^+$, $Na^+$ water gets Alkaline Reduced Water containing the minerals beneficial to the human body. A positive electrode side is made of the organic materials that have an anion such as chlorine (Cl), phosphorus (P), sulfur(S). This experiment uses the Alkaline Reduced Water to adjust the magnitude of the voltage of the electrolysis in the Alkaline Reduced Water. That is 1st step(pH8) 2nd step (pH8.5) 3th step (pH9), 4th step (pH9.5) in the Alkaline Reduced Water and -1st step (pH6.0), -2nd step (pH5.0) used as the acidic oxidation water. When the water passes through the three filter in this system was evaluated whether the ORP values are changed and stabilized. When about 100 liters of water passing through the filter was confirmed that the ORP values are stability and evaluation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.273-274
• /
• 2010

This study investigated on the early hydration and physical characteristics of blast furnace slag through pH variation. The pH values applied to the experiments were, 12.0 and 13.0 which are the pH values of OPC, and type 3 of pH 14.0 which is a strong alkali condition. A paste and mortar method was used to test blast furnace slag and blast furnace slag containing 2wt% of gypsum. It was found that CAH and CSH phases were formed as key hydrates during the early hydration of blast furnace slag, and ettringites were produced extra during the early hydration of blast furnace slag containing 2wt% of gypsum.

• Mycobiology
• /
• v.35 no.3
• /
• pp.135-144
• /
• 2007

The removal efficiency of the heavy metals Zn, Pb and Cd by the zoosporic fungal species Saprolegnia delica and the terrestrial fungus Trichoderma viride, isolated from polluted water drainages in the Delta of Nile in Egypt, as affected by various ranges of pH values and different temperature degrees, was extensively investigated. The maximum removal efficiency of S. delica for Zn(II) and Cd(II) was obtained at pH 8 and for Pb(II) was at pH 6 whilst the removal efficiency of T. viride was found to be optimum at pH 6 for the three applied heavy metals. Regardless the median lethal doses of the three heavy metals, Zn recorded the highest bioaccumulation potency by S. delica at all pH values except at pH 4, followed by Pb whereas Cd showed the lowest removal potency by the fungal species and vice versa in case of T. viride. The optimum bio-mass dry weight production by S. delica was found when the fungus was grown in the medium treated with the heavy metal Pb at pH 6, followed by Zn at pH 8 and Cd at pH 8. The optimum biomass dry weight yield by T. viride amended with Zn, Pb and Cd was obtained at pH 6 for the three heavy metals with the maximum value at Zn. The highest yield of biomass dry weight was found when T. viride treated with Cd at all different pH values followed by Pb whilst Zn output was the lowest and this result was reversed in case of S. delica. The maximum removal efficiency and the biomass dry weight production for the three tested heavy metals was obtained at the incubation temperature $20^{\circ}C$ in case of S. delica while it was $25^{\circ}C$ for T. viride. Incubation of T. viride at higher temperatures ($30^{\circ}C\;and\;35^{\circ}C$) enhanced the removal efficiency of Pb and Cd than low temperatures ($15^{\circ}C\;and\;20^{\circ}C$) and vice versa in case of Zn removal. At all tested incubation temperatures, the maximum yield of biomass dry weight was attained at Zn treatment by the two tested fungal species. The bioaccumulation potency of S. delica for Zn was higher than that for Pb at all temperature degrees of incubation and Cd bioaccumulation was the lowest whereas T. viride showed the highest removal efficiency for Pb followed by Cd and Zn was the minor of the heavy metals.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.1
• /
• pp.67-71
• /
• 1991

The purpose of this study was to investigate the possibility of using the buffer index curve as a criterion of silage quality evaluation. The buffer index (or buffer capacity, $\beta$) value is the amount of 0.1N NaOH consumed in titrating from the beginning to the end of the chosen pH step. This value equals the slope of the titration curve at the chosen pH range (${\beta}={\Delta}NaOH/{\Delta}pH$). There were two patterns of buffer index curve. Poorly preserved silages had a peak at pH 5.0, whereas with well preserved silages the peaks tended to rise to the pH 3.75 or 4.00. Well preserved, wilted silages with high pH also appeared to have peak values at pH 3.75 or 4.00. There was a high positive correlationship between the concentration of lactic acid and peak value of good quality silage (r = 0.994, p < 0.01). Also a high positive correlationship (r = 0.899, p < 0.001) was found between the sums of concentration of acetic and butyric acids and the peak values of poor quality silages. The results of these experiments verified the value of the buffer index method as a criterion of silage quality evaluation.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.35-41
• /
• 2007

This study was conducted to determine the effect of pH adjustment and addition of sodium chloride (NaCl) on quality characteristics of pork leg surimi. The pork leg surimi was manufactured with one of following pH 3.0 or pH 11.0 adjustment and contained 2% NaCl or not; C (Alaska pollack surimi, two times washing, 0% NaCl), T1 (pork leg surimi pH 3.0 adjustment, 0% NaCl), T2 (pork leg surimi, pH 3.0 adjustment, 2% NaCl), T3 (pork leg surimi, pH 11.0 adjustment 0% NaCl), T4 (pork leg surimi, pH 11.0 adjustment, 2% NaCl). The $L^*$ and W values was increased with increasing of pH value, but the $a^*$ and $b^*$ values lower. The W values were higher (p<0.05) as addition of NaCl, but $a^*$ and $b^*$ values were lower. In textural properties, the cohesiveness was increased with increasing of pH value, however with the exception of springiness all traits were higher (p<0.05) as addition of NaCl. The breaking force and gel strength was increased with increasing of pH value. The breaking force, gel strength and breaking force u deformation were higher as addition of NaCl, but shear force lower. In sensory evaluation, the tenderness was increased with increasing of pH value and all traits of sensory evaluation also were higher (p<0.05) as addition of NaCl. There were no differences in interaction of pH adjustment and without or with NaCl on color, textural properties, breaking force, deformation, gel strength, shear force and sensory evaluation of pork leg surimi. The color, textural and physical characteristics and sensory evaluation ot T2 and T4 were similar to treatment C. Therefore, the pH 11.0 and 2% NaCl addition on process of manufacture of pork leg surimi would be recommended.

• Journal of Animal Science and Technology
• /
• v.58 no.7
• /
• pp.27.1-27.8
• /
• 2016

Background: Studies on prevalence of pale, soft, exudative (PSE) condition in Sri Lankan poultry industry is minimal. Hence, the objective of present study was to determine the incidence of PSE chicken meat in a commercial meat processing plant and to find out its consequences on meat quality traits of roasted chicken breast. Method: A total of 60 breast fillets were randomly selected, evaluated based on color L* value, and placed into 1 of 2 categories; PSE (L* > 58) or normal meat ($L*{\leq}58$). A total of 20 breast fillets (10 PSE and 10 normal) were then analyzed for color, pH, and water holding capacity (WHC). After processing those into roasted chicken breast, cooking loss, color, pH, WHC, and texture values were evaluated. A sensory evaluation was conducted using 30 untrained panelists. Results: The incidence of PSE meat was 70 % in the present experiment. PSE fillets were significantly lighter and had lower pH values compared with normal fillets. Correlation between the lightness and pH was negative (P < 0.05). Although there was no significant difference in color, texture, and WHC values between the 2 groups after processing into roasted chicken breast (P > 0.05), an approximately 3 % higher cooking loss was observed in PSE group compared to its counterpart (P < 0.05). Moreover, cooking loss and lightness values showed a significant positive correlation. Nevertheless, there were no significant differences in sensory parameters between the 2 products (P > 0.05). Conclusions: These results indicated that an economical loss can be expected due to the significantly higher cooking loss observed in roasted breast processed from PSE meat.

• Food Science of Animal Resources
• /
• v.25 no.3
• /
• pp.310-315
• /
• 2005

The changes in pH, temperature, R-values and ${\mu}-calpain$ and its inhibitor activity of M. longissimus from Hanwoo steer were investigated at 1, 3, 9 and 24h postmortem. The pH and temperature of M. longissimus were significantly (p<0.05) decreased during 24h postmortem time, and were 6.50 and $31.99^{\circ}C$, respectively, at 3h postmortem. $R_{248}\;and\;R_{250}$ were increased, but $R_{258}$ was decreased after 9h postmortem time (p<0.05). Calpain I and calpastatin activity were decreased after 3h and 9h postmortem time, respectively (p<0.05). pH and temperature showed high positive correlations with $R_{258}$ (r=0.967 and r=0.970, respectively), calpain I (r =0.956 and r=0.954, respectively) and calpastatin (r=0.978 and r=0.986, respectively) but had high negative correlations with $R_{248}$ (r=-0.982 and r=-0.973, respectively) and $R_{248}$ (r=-0.983 and r=-0.976, respectively). from these results, the change of postmortem metabolism of M. longissimus from Hanwoo steer likely occurred after 9h postmortem time. However, the further study on the establishment of metabolism from Hanwoo between postmortem 3h and 9h are necessary to produce Hanwoo beef with high acceptance in meat quality.