• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.1
• /
• pp.19-26
• /
• 2004

According to increase of domestic blood components use, the quality control of blood components is necessary to support good products. The purpose of this study is used to provide the producing index of the good product as compared with the accuracy and validity for the distribution of the quality control data. The value of mean, standard deviation, 95% confidence interval and degree of normal distribution of data were calculated by univariate procedure, the value of monthly mean of each blood centers per items were compared by Analysis of Variance(ANOVA) test for the degree of distribution. When there was difference among the mean values, the Duncan's multiple range test was done to confirm the difference. Finally, methods for accessing accuracy and validity of the quality data was done by the Contingency table test. The quality data of five blood centers was showed to the normal distribution and it was in a acceptable range. For each blood centers, the monthly means of Hematocrit(Hct), Platelet(PLT) and pH were not significantly different except Hct of C center, PLT of B, D center and pH of A center. The quality data per items was graded according to quality to six level. As a result of the comparative analysis, the monthly means of Hct of C and E center was significantly different higher than that of D, B and A center. The monthly means of PLT of A center and pH of C center was significantly different higher than that of the others. In the accuracy and validity of the quality control data, C center for Hct, A center for PLT and C center for pH were better than the other. The C blood center was most satisfiable and stable in the quality control for blood component. If the quality control method used in C blood center is adopted in other blood centers, the prepared level of the blood component of the center will be improved partly.

• The Journal of the Korea Contents Association
• /
• v.19 no.11
• /
• pp.353-364
• /
• 2019

The purpose of this study was to investigate effect of psychotic patient after applying anger management video and tea gathering program to psychotic patient. This study was an experimental research and used nonequivalent control-group pretest-posttest design. Study subjects were 16 patients for an experimental group and 16 for a control group-32 in total- who were psychotic patients hospitalized in a closed ward in H mental hospital. The measurement variable is an aggressiveness scale, and the effect of the program was measured once after the video program and once after eight tea gathering. Data Analysis methods were real number and percentage, average and standard deviation, χ² test, t-test, paired t-test, and Repeated measure ANOVA. The aggression of an experiment group was significantly lower than the control group(F=14.38, p< .001). Aggressive sub-item, hostility (F=8.53, p< .001), anger (F=6.10, p=.004), verbal aggression(F=7.58, p< .001), physical aggression(F=13.92, p< .001) all of tte experiment group was significantly lower than control group. Based on these results, anger management programs can be used as basic data for anger control in psychotic patient or in various groups.

• Corrosion Science and Technology
• /
• v.14 no.4
• /
• pp.166-171
• /
• 2015

Knowledge of how metal releases from the stainless steels used in food processing applications and cooking utensils is essential within the framework of human health risk assessment. A new European standard test protocol for testing metal release in food contact materials made from metals and alloys has recently been published by the Council of Europe. The major difference from earlier test protocols is the use of citric acid as the worst-case food simulant. The objectives of this study were to assess the effect of citric acid at acidic, neutral, and alkaline solution pH on the extent of metal release for stainless steel grades AISI 304 and 316, commonly used as food contact materials. Both grades released lower amounts of metals than the specific release limits when they were tested according to test guidelines. The released amounts of metals were assessed by means of graphite furnace atomic absorption spectroscopy, and changes in the outermost surface composition were determined using X-ray photoelectron spectroscopy. The results demonstrate that both the pH and the complexation capacity of the solutions affected the extent of metal release from stainless steel and are discussed from a mechanistic perspective. The outermost surface oxide was significantly enriched in chromium upon exposure to citric acid, indicating rapid passivation by the acid. This study elucidates the effect of several possible mechanisms, including complex ion- and ligand-induced metal release, that govern the process of metal release from stainless steel under passive conditions in solutions that contain citric acid.

• Journal of the Korean Ceramic Society
• /
• v.48 no.1
• /
• pp.86-93
• /
• 2011

Transparent plasma display can be realized by developing the synthetic chemistry of appropriate nanophosphors and generating nanophosphor-based transparent luminescent layers. For this goal, red-emitting $Y(V_{0.5},\;P_{0.5})O_4$:Eu nanophosphors were synthesized by a facile hydrothermal route at $200^{\circ}C$ for 48 h and the resulting nanophosphors were subsequently annealed at $800^{\circ}C$ at an ambient atmosphere. The crystallographic structure, morphology, and emission property of the as-synthesized and annealed nanophosphors were compared. Choosing 2-methoxyethanol as a dispersion medium and applying a standard sonication, well-dispersed nanophosphor solutions could be prepared. Using these dispersions, visible transparent nanophosphor layers were spin-deposited on glass substrates. By combining $Y(V_{0.5},\;P_{0.5})O_4$:Eu nanophosphor layer/glass substrate as a rear plate with a front plate used in a conventional plasma display panels (PDPs), mini-sized transparent red-emitting PDPs were constructed. Transmittance and luminance properties of two transparent test panels using as-synthesized versus $800^{\circ}C$-annealed nanophosphors were characterized and compared.

• Clinical and Experimental Pediatrics
• /
• v.45 no.4
• /
• pp.482-488
• /
• 2002

Purpose : We performed this study to evaluate the diagnostic usefulness of endoscopic finding of nodular gastritis, CLO and HpKit test for H. pylori infection in children. Methods : Gastroduodenal endoscopy and mucosal biopsy were performed on 212 children who visited our hospital between Jul. 1999 and May 2000 due to abdominal pain. We performed CLO and HpKit test for H. pylori with the time interval of 15, 30 minutes, 1, 2, 3, 24, 48, 72, 96, 120 and 144 hours. Histological examination of H. pylori was made by H-E or Alcian yellow stain with biopsy specimens. Sensitivity, specificity, positive predictive and negative predictive value of nodular gastritis, CLO and HpKit test were calculated from the analysis of above data. Results : Sensitivity and specificity of 3 hour-CLO test was 68.4% and 100% respectively. Sensitivity and specificity of 3 hour-HpKit test was 65.8% and 100% respectively. No significant difference in sensitivity and specificity was found between in 3 hour-CLO and HpKit test(P>0.05). Sensitivity of CLO test increased as time lapsed, but corresponding specificity did not decrease as time lapsed(sensitivity and specificity at 144 hours : 89.5% and 94.8% respectively). However, sensitivity of HpKit test increased as time lapsed, but specificity markedly decreased. Sensitivity and specificity of the nodular gastritis was 78.9% and 93.7% respectively. Conclusion : Both CLO and HpKit test have relatively low sensitivity and specificity for the detection of H. pylori in 3 hours of testing in children. The endoscopic finding of nodular gastritis is another good standard in the diagnosis of H. pylori infection in children.

• Journal of Environmental Science International
• /
• v.19 no.2
• /
• pp.255-260
• /
• 2010

A stabilization/solidification (S/S) process for lead (Pb) contaminated soils was evaluated using waste cow bone containing apatite like compounds. Soil samples obtained form firing range were treated with waste cow bone. The effectiveness of stabilization was evaluated based on the Korean Standard Leaching Test (KSLT) and soil pH. The leached concentration reduced with increased in dose of waste cow bone. Overall, the KSLT results showed that Pb concentration in soils are significantly affected by amount of waste cow bone. When soil amended with 20 % of waste cow bone, less than 0.1 mg/kg was leached, and soil pH was increased from 6.5 to 8.4. Same results were obtained when finer waste cow bone was applied. The reachable concentration of Pb in soil showed in inversely proportional to solid/liquid ratio. Aging periods indicate improving mix design was applied. Relatively high lead concentrations was observed at the first 1 days, however leaching profile are reduced significantly over time for all mix designs.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.81-82
• /
• 2009

IEC 60456 declared the cocoa soiled cloth to be one of the standard soiled test cloths for measuring the performance of the clothes washing machines. Researchers for textile washing have known that cocoa soiled cloth has shown unpredictable washing performance. The color of cocoa mainly comes from flavonoids, and flavonoids reversibly change color with alkalinity from pH 1 to pH 7 as food colorants. The color change of flavonoids under various washing conditions, in the alkali solution, has not yet been confirmed. In this study, we have investigated the color change and the soil removal of the cocoa soiled cloth which were washed with alkaline washing liquids of various hardnesses. The cocoa soiled cloth which was washed in the water which was 60ppm or higher became darker than the soiled cloth. When the cloth was washed in the detergent solution, the cloth was slightly darker only when the washing condition was $20^{\circ}$ and 250ppm. As the water hardness increased, the soil removal decreased and the higher washing temperature was more effective.

• Animal Bioscience
• /
• v.36 no.6
• /
• pp.953-961
• /
• 2023

Objective: This study aimed to investigate the effect of dorsal cranial myopathy (DCM) on chicken meat quality. Methods: Sixty-six Ross 308 AP broilers, 47 days old, of both sexes, weighing about 3.51 kg, were slaughtered according to standard industrial practices, and evaluated for meat color, pH, chemical composition, collagen content, fatty acid profile, and histopathological parameters. Comparisons between normal and DCM-affected meat were performed using Student's t-test at the 5% significance level. Results: Histological analysis of muscle tissues affected by DCM showed myofiber degeneration, proliferation of inflammatory cells, fibroplasia, and necrosis with fibrosis. DCM samples had lower protein content and higher moisture, ash, insoluble collagen, total collagen, and pH. DCM-affected meat was redder and more yellowish. There were no differences in lipid or soluble collagen contents between groups. DCM-affected meat had higher percentages of arachidonic acid (C20:4n-6) and eicosapentaenoic acid (C20:5n-3). Conclusion: This study revealed that DCM-affected meat exhibits considerable changes in quality parameters.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.656-661
• /
• 2011

5-(3,4,5-Triethoxyphenyl)-1,3,4-oxadiazole-2-thiol 6 on treatment with substituted 3-(bromomethyl)-2-chloroquinoline or 2-(p-tolyloxy)-3-(bromomethyl)quinoline 4a-j afforded the corresponding 3-((5-(3,4,5-triethoxyphenyl)-1,3,4-oxadiazol-2-ylthio)methyl)-2-chloroquinoline or 3-((5-(3,4,5-triethoxyphenyl)-1,3,4-oxadiazol-2-ylthio)methyl)-2-(p-tolyloxy)quinoline 7a-j, in the presence of $K_2CO_3$ and DMF under stirring at ambient temperature. All the synthesized compounds were further screened for their antibacterial activities. Some of our compounds showed excellent antibacterial activities against test organisms and reference standard.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.1
• /
• pp.95-101
• /
• 2016

Vehicular communications is system which can be applied for transmission of various safety messages or Intelligent Transportation Systems(ITS) applications by combining vehicle/road technology with Information and Communication Technology(ICT). In recent years, a variety of ITS services are available such as driving information, road conditions, V2X messages as well as navigation and traffic jams notification. In general, vehicular communications can be used for vehicle-to-vehicle and vehicle-to-infrastructure communication by adopting IEEE802.11p/1609 standard which is commonly known as wireless access in vehicular environments. In this paper, WAVE communication standard based on the IEEE802.11p is explained and signal characteristics in WAVE communication is introduced. Also, The H/W and S/W characteristics in Road Side Station and On Board Equipment for the Vehicle to Everything communication are analyzed. Received Signal Strength which is power of receiving signal of communication equipment is measured in test road to estimate the real WAVE communication's performance. It is shown that the implemented WAVE communication technology is satisfactory to provide ITS services.