• Title/Summary/Keyword: pH stability

Search Result 2,390, Processing Time 0.038 seconds

Effects on microbial diversity of fermentation temperature (10℃ and 20℃), long-term storage at 5℃, and subsequent warming of corn silage

  • Zhou, Yiqin;Drouin, Pascal;Lafreniere, Carole
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.32 no.10
    • /
    • pp.1528-1539
    • /
    • 2019
  • Objective: To evaluate the effects on microbial diversity and biochemical parameters of gradually increasing temperatures, from $5^{\circ}C$ to $25^{\circ}C$ on corn silage which was previously fermented at ambient or low temperature. Methods: Whole-plant corn silage was fermented in vacuum bag mini-silos at either $10^{\circ}C$ or $20^{\circ}C$ for two months and stored at $5^{\circ}C$ for two months. The mini-silos were then subjected to additional incubation from $5^{\circ}C$ to $25^{\circ}C$ in $5^{\circ}C$ increments. Bacterial and fungal diversity was assessed by polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) profiling and biochemical analysis from mini-silos collected at each temperature. Results: A temperature of $10^{\circ}C$ during fermentation restricted silage fermentation compared to fermentation temperature of $20^{\circ}C$. As storage temperature increased from $5^{\circ}C$ to $25^{\circ}C$, little changes occurred in silages fermented at $20^{\circ}C$, in terms of most biochemical parameters as well as bacterial and fungal populations. However, a high number of enterobacteria and yeasts (4 to $5\;log_{10}$ colony forming unit/g fresh materials) were detected at $15^{\circ}C$ and above. PCR-DGGE profile showed that Candida humilis predominated the fungi flora. For silage fermented at $10^{\circ}C$, no significant changes were observed in most silage characteristics when temperature was increased from $5^{\circ}C$ to $20^{\circ}C$. However, above $20^{\circ}C$, silage fermentation resumed as observed from the significantly increased number of lactic acid bacteria colonies, acetic acid content, and the rapid decline in pH and water-soluble carbohydrates concentration. DGGE results showed that Lactobacillus buchneri started to dominate the bacterial flora as temperature increased from $20^{\circ}C$ to $25^{\circ}C$. Conclusion: Temperature during fermentation as well as temperature during storage modulates microorganism population development and fermentation patterns. Silage fermented at $20^{\circ}C$ indicated that these silages should have lower aerobic stability at opening because of better survival of yeasts and enterobacteria.

Effects of Guar Gum Addition on Optimal Properties of Fish Surimi Mixture for 3D Printing (구아검 첨가가 3D 프린팅을 위한 수리미 혼합물의 특성에 미치는 영향)

  • Hyun-Sik Na;Dong-Hyeon Kim;Ha-Young Lee;Sang-Min Lee;Hyeon-Ji Yu;Go-wun Seo;ChangHyeon Ko;Seon-Woo Park;Hyung-Wook Choi;Ye-Jin Choi;Mi Jeong Jo;Dong-Woo Kim;DongHyun Ahn
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.56 no.6
    • /
    • pp.790-797
    • /
    • 2023
  • Guar gum is an edible starch extracted from Cyamopsis tetragonolobus and used as an auxiliary ingredient to enhance the viscosity and adhesiveness of food and improve its emulsification stability. Here, characteristics of fish surimi mixture with various added amounts (0, 0.23, 0.45, 0.67, and 0.89 wt%) of guar gum were analyzed. In unheated surimi with guar gum, the pH decreased as the content increased. In the color values analysis, only the b* (yellowness) increased depending on the amount of added guar gum. The firmness increased with increasing guar gum content, and no significant difference in adhesiveness was observed. In heated surimi, a* (redness) and b* decreased in a content-dependent manner, and L* (lightness) was higher than that of unheated surimi. Regarding physical properties, the highest values of hardness, gumminess, and chewiness were observed in the heated surimi with 0.67 wt% of guar gum. However, no significant change was observed in springiness and cohesiveness. Results of sensory evaluation indicated that with higher guar gum content, only the hardness increased slightly, and significant differences were absent in the remaining parameters. Thus, surimi with 0.67 wt% of guar gum is considered to be optimal for 3D printing.

Mineralogy and Genesis of Hydrothermal Deposits in the Southeastern Part of Korean Peninsula : (5) Deogbong Napseok Deposit (우리나라 동남부 지역의 열수광상에 대한 광물학적 및 광상학적 연구:(5) 덕봉납석광상)

  • Kim, Soo-Jin;Choo, Chang-Oh;Kim, Won-Sa
    • Journal of the Mineralogical Society of Korea
    • /
    • v.7 no.1
    • /
    • pp.25-39
    • /
    • 1994
  • The Deogbong napseok clay deposit which is composed mainly of dickite and pyrophyllite has been formed by hydrothermal alteration of the Late Cretaceous volcanic rocks consisting of andesitic tuff and andesite. The mineralogy of the napseok ores and the hydrothermal alteration processes have been studied in order to know the nature of the interaction between minerals and fluids for the formation of the deposit. Chemical distribution shows that alkali elements and silica were mobile but alumina was relatively immobile during the hydrothermal processes. It is evident that enrichment of alumina and leaching of silica from the host rock led to the formation of the napseok ore, whereas the enrichment of silica in the outer zone of the deposit gave rise to the silica zone. A large amount of microcrystalline quartz closely associated with dickite and pyrophyllite suggests the increasing activity of silica. Thus Si which was released away from the argillic zone by the increasing activity of silica. Thus Si which was released away from the argillic zone by the increasing activity of silica solubility moved out precipitating in the margin of the deposit to form the silica zone. Variation in dickite crystallinity implies the local change in the stability of the system. Thermodynamic calculation shows that the invariant point of pyrophyllite-dickite (kaolinite)-diaspore-quartz assemblages at 500 bars in the system $Al_{2}O_{3}-SiO_{2}-H_{2}O$ is about 300 $^{\circ}C$. Based on the mineral assemblages and the experimental data reported, it is estimated that the main episode of hydrothermal alteration occurred at least above 270 to 300 $^{\circ}C$ and $X_{CO_2}$ <0.025. Mineral occurrence and chemical variation indicate that the activity of Al is high in the upper part of the deposit, whereas the activity of Si is high in the lower part and the margin of the deposit. The nonequilibrium phase relations observed in the Deogbong deposit might be due to local change in intensive thermodynamic variables and fluid transport properties that resulted in the formation of nonequilibrium phases b of several stages.

  • PDF

Hydrochemistry of Groundwater at Natural Mineral Water Plants in the Okcheon Metamorphic Belt (옥천계변성암 지역의 먹는샘물 지하수의 수리지구화학적 특성)

  • 추창오;성익환;조병욱;이병대;김통권
    • Journal of Korea Soil Environment Society
    • /
    • v.3 no.3
    • /
    • pp.93-107
    • /
    • 1998
  • Because of its stable quantity and quality, groundwater has long been a reliable source of drinking water for domestic users. Rapid economic growth and rising standards of living have in recent years put severe demands on drinking water supplies in Korea. Groundwaters that are currently being used for natural mineral water were hydrochemically evaluated and investigated in order to maintain their quality to satisfy strict health standards. There exist 15 natural mineral water plants in the Okcheon metamorphic belt. Characteristics of groundwaters are different from those of other areas in that electrical conductivity, hardness, contents of Ca, Mg and $HCO_3$are relatively high. The content of major cations is in the order of Ca>Mg, Na>K, whereas that of major anions shows the order of $HCO_3$>$SO_4$>Cl>F. The fact that the Ca-Mg-HCO$_3$type is mostly predominant among water types reflects that dissolution of carbonates that are abundantly present in the metamorphic rocks plays an important part in groundwater chemistry. Representative correlation coefficients between chemical species show Mg-$HCO_3$(0.92), Ca-$HCO_3$(0.88), Ca-Mg(0.80), Ca-Cl(0.78), Mg-$SO_4$(0.78), Ca-$SO_4$(0.71), possibly due to the effect by dissolution of carbonates, gypsum or anhydrite. Determinative coefficients between some chemical species represent a good relationship, especially for EC-(K+Na+Ca), Ca-$HCO_3$, Ca-Mg, indiacting that they are similar in chemical behaviors. According to saturation index, most chemical species are undersaturated with respect to major minerals, except for some silica phases. Groundwater is slightly undersaturated with respect to calcite and dolomite, whereas it is still greatly undersaturated with respect to gypsum, anhydrite and fluorite, Based on the Phase equilibrium in the systems $NA_2$O-$Al_2$$O_3$-$SiO_2$-$H_2$O and $K_2$O-$Al_2$$O_3$-$SiO_2$-$H_2$O, it is clear that groundwater is in equilibrium with kaolinite, evolved from the stability area of gibbsite during water-rock interaction. It is expected that chemical evolution of groundwater continue to proceed with increasing pH by reaction of feldspars, with calcite much less reactive.

  • PDF

Comparative Studies on the Enzymatic Properties of Trypsins from Cat-shark and Mackerel -2. Enzymatic Properties of the Trypsins- (복상어와 고등어의 Trypsin에 관한 비교효소학적 연구 -2. 정제 Trypsin의 효소적 성질-)

  • PYEUN Jae-Hyeung;CHO Deuk-Moon;HEU Min-Soo
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.25 no.5
    • /
    • pp.383-391
    • /
    • 1992
  • A comparative study of enzymatic properties between the trypsin from the cat-shark Cephaloscyllium umbratile ( C-T) and the two trypsins from the mackerel Scomber japonicus $(M-T_A\;and\;M-T_B)$ was carried out following after the previous paper(Pyeun et al., 1991). Trypsin from cat-shark(C-T) showed the higher heat stability compared to the others $(M-T_A\;and\;M-T_B)$ and its denaturation constant$(K_D)$ was $10.68\times10^{-4}\;sec^{-1}\;at\;55^{\circ}C$ with BA-p-NA substrate. The activation energies(Ea) of the trypsins measured at a temperature range from $30^{\circ}C\;to\;50^{\circ}C$ were estimated to be 4.07 kcal/mole for C-T, 11.61 kcal/mole for $M-T_A$, and 8.43kcal/mole for $M-T_B$, respectively. The Km values were $24.9\times10^{-5}\;M\;for\;C-T,\;5.37\times10^{-5}\;M\;for\;M-T_A,\;and\;9.65\times10^{-5}\;M\;for\;M-T_B$. On the other hand, the Ki values for TLCK and DFP determined by Dixon plot were $1.50\times10^{-6}\;M\;and\;9.28\times10^{-6}\;M\;for\;C-T\;2.86\times10^{-6}\;M\;and\;2.11\times10^{-4}\;M\;for\;M-T_A\;and\;3.90\times10^{-6}\;M\;and\;1.60\times10^{-4}\;M\;for\;M-T_B$ Similar amino acid profiles were showed between three trypsins each other, with few exceptions of $M-T_B$ containing higher amount of arginine, and the smaller amount of tryptophan in C-T than the others.

  • PDF

A Study on Fractionation and Characterization of Water-Soluble Natural Fe-Chelates From Garbage Compost and Activated Sewage Sludge (활성오니(活性汚泥) 및 진개퇴비중(塵芥堆肥中) 수용성(水溶性) 철(鐵) 킬레이트의 분리(分離)와 특성(特性)에 관(關)한 연구(硏究))

  • Park, Nae-Joung;Lindsay, W.L.
    • Applied Biological Chemistry
    • /
    • v.18 no.4
    • /
    • pp.194-202
    • /
    • 1975
  • This study was conducted to study the properties of the water-soluble natural chelating agents from garbage compost and activated sewage sludge responsible for Fe chelation, which is closely associated with the effectiveness in correcting iron chlorosis in plant. The water-soluble fraction of these materials was fractionated by menas of Sephadex gel filtration and the fractions of Fe chehates were traced by radioactive $^{59}Fe$. The fractions were examined by ultraviolet and infrared. spectroscopy and stability constants for Fe. The water-soluble fraction from garbage compost was separated by Sephadex G-25 into approximately four fractions. Most of the added $^{59}Fe$ was associated with fraction I, which appeared at the void volume. Further fractionation by Sephadex G-50 indicated that the molecular weight of water-soluble chelating agents is in the approximate range of 5000 to 10,000. The water-soluble fraction from activated sewage sludge gave six fractions by Sephadex G-25. Most of the added $^{59}Fe$ was found in the fraction I,II, and III, The molecular weights of most chelating agents associated with $^{59}Fe$ appeared to be less than 5,000 and those of fraction I that appeared at the void volume was in the range of 5,000 to 1,000. Discrepancy between radio activity count and UV absorption indicated the heterogeneity of the fractions obtained by Sephadex gel filtration. Ultraviolet absorption spectra of all fractions separated by Sephadex G-25 and containing chelating agents showed no differences. Fraction IV and V of sewage extract showed absorption maxima and shifting similar to nucleic acid components suggesting the presence of decomposition products of nucleic acid. Similarity fraction VI contained phenolic type amino acid groups. Fraction I of compost extract contained most of the added $^{59}Fe$ and showed weak but extra definite absorption in the 1230, and $1270cm^{-1}$ region, suggesting that extra oxygen groups in polyphenolic structure were probably involved in Fe chelation. In sewage extract, fraction I,II, and III in which most of the $^{59}Fe$ was found, showed strong definite polypeptide absorption in the region of $1540cm^{-1}$ due to NH deformation and C-N stretching of amide groups in the peptidebond. These extra functional groups in fraction I, II, and III appeared to be associated with Fe chelation. The other fractions, not associated with $^{59}Fe$, still have carboxyl and hydroxyl groups, suggesting that these functional groups in these water extracts may not independently form the Fe chelates. Precipitation of ferric hydroxide precluded measuring the stability constants for Fe-chelates. However, the formation constants for Zn chelates as log K values for compost extract and sewage extract at pH 4.0 from which the strength of chelation with Fe could be presumed, were 8.23, and 9.75, respectively, indicating strong complexation with metals. The chelating capacity of compost extract containing 6.5 g organic matter per liter was 0.82 mM, and that of sewage extract containing 5.3 g per liter was 0. 64 mM.

  • PDF

Evaluation of Anti-wrinkle Effect of Peanut Shell Extract and Stability of the Extract in Cosmetic Products (땅콩 겉껍질 추출물의 주름개선 효능 및 화장품 제형에서 추출물의 안정성 평가)

  • Narae Han;Jin Young Lee;Mihyang Kim;Eun Young Choi;Bong-Jeun An;Yu-Young Lee;Moon Seok Kang;Hyun-Joo Kim
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.49 no.3
    • /
    • pp.203-212
    • /
    • 2023
  • This study was conducted to investigate the possibility of peanut shell, a by-product of peanut, as a functional cosmetic ingredient. Peanut shell extract showed high antioxidant activity with IC50 values of 75.00, 46.33, and 472.83 ㎍/mL for DPPH and ABTS radical scavenging and SOD-like activity, respectively. Furthermore, peanut shell extract was efficiently decreased the MMP-1 and MMP-3 protein level in the UVB treated-HaCaT cell and maintained procollagen protein level similar to normal control. Similar to anti-wrinkle related protein expression assay, the IC50 value of elastase and collagnease inhibition in peanut shell extract was lower as 0.30 and 0.09 mg/mL, respectively, than that of the positive control. Additionally, eriodictyol and luteolin, which are isolated from peanut shell extract, showed 53.8 and 98.0% elastase inhibition rate, respectively, and 60.1 and 72.5% collagenase inhibition rate, respectively, at a concentration of 0.1 mg/mL. Thus, luteolin was assumed to be the effective ingredient for wrinkle inhibition in peanut shell extract. As a result of stability evaluation of lotion and cream formulations containing peanut shell extract, it was confirmed to be a stable formulation with no significant changes. Therefore, it is considered that peanut shell extract can be applied as a cosmetic ingredient for wrinkle inhibition.

Laterally Unbraced Length for Preventing Inelastic Lateral-Torsional Buckling of High-Strength Steel Beams (고강도 강재보의 비탄성 횡-비틀림좌굴 제어를 위한 횡지지 거리)

  • Park, Chang Hee;Lee, Cheol Ho;Han, Kyu Hong;Kim, Jin Ho;Lee, Seung Eun;Ha, Tae Hyu;Kim, Jin Won
    • Journal of Korean Society of Steel Construction
    • /
    • v.25 no.2
    • /
    • pp.115-130
    • /
    • 2013
  • In this study, lateral-torsional buckling (LTB) strength of high-strength H-beams built up from 800MPa tensile-strength steel was experimentally and analytically evaluated according to current lateral stability provisions (KBC 2009, AISC-LRFD 2010). The motivation was to evaluate whether or not current LTB provisions, which were originally developed for ordinary steel with different stress-strain characteristics, are still applicable to high-strength steel. Two sets of compact-section specimens with relatively low (Set A) or high (Set B) warping stiffness were prepared and tested under uniform moment loading. Laterally unbraced lengths of the test specimens were controlled such that inelastic LTB could be induced. All specimens exhibited LTB strength exceeding the minimum limit required by current provisions by a sufficient margin. Moreover, some specimen in Set A reached a rotation capacity required for plastic design, although its laterally unbraced length belonged to the inelastic LTB range. All the test results indicated that extrapolation of current provisions to high-strength steel is conservative. In order to further analyze the test results, the relationship between inelastic moment and laterally unbraced length was also derived in explicit form for both ordinary- and high-strength steel based on the effective tangent modulus of inelastic section. The analytical relationship derived again showed that extrapolation of current laterally unbraced length limit leads to a conservative design in the case of high-strength steel and that the laterally unbraced length to control the inelastic LTB behavior of high-strength steel beam should be specified by including its unique post-yield strain-hardening characteristics.

Effect of supercooling on the storage stability of rapidly frozen-thawed pork loins (과냉각 온도가 급속냉동-해동 처리된 돈육 등심의 저장성에 미치는 영향)

  • Choi, Eun Ji;Park, Hae Woong;Chung, Young Bae;Kim, Jin Se;Park, Seok Ho;Chun, Ho Hyun
    • Food Science and Preservation
    • /
    • v.24 no.2
    • /
    • pp.168-180
    • /
    • 2017
  • This study was performed to determine the rapid thawing method for reducing the thawing time of frozen pork loins and to examine the effects of supercooling on the microbiological, physicochemical, and sensory qualities of fresh and frozen-thawed pork during storage at -1.5, 4, and $15^{\circ}C$. Forced-air thawing at $4^{\circ}C$ was the most time-consuming process, whereas radio frequency thawing time was the shortest by dielectric heating. The supercooling storage temperature was chosen to be $-1.5^{\circ}C$ because microstructural damages were not observed in the pork sample after cooling at $-1.5^{\circ}C$ for 24 h. Fresh or frozen-thawed pork loins stored at $-1.5^{\circ}C$ had lower drip loss and total volatile base nitrogen, thiobarbituric acid-reactive substance, and Hunter b* levels than loins stored at 4 and $15^{\circ}C$. In addition, the least degree of increase in preexisting microorganisms counts of the fresh or frozen-thawed pork loin samples was obtained during supercooled storage at $-1.5^{\circ}C$. Sensory quality results of fresh and frozen-thawed pork loin samples stored at $-1.5^{\circ}C$ showed higher scores than the samples stored at 4 and $15^{\circ}C$. These data indicate that supercooling at $-1.5^{\circ}C$ in the meat processing industry would be effective for maintaining the quality of pork meats without ice crystal nucleation and formation.

The Storage Stability of Semi-Salted and Dried Mackerel by Free-Oxygen Absorber (탈산소제에 의한 반염건고등어 저장중의 품질안정성)

  • LEE Eung-Ho;CHUNG Young-Hoon;JOO Dong-Sik;KIM Jeong-Hee;OH Kwang-Soo
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.18 no.2
    • /
    • pp.131-138
    • /
    • 1985
  • The preservative effect of modified-atmosphere storage on the shelf-life of packed semi-salted and dried mackerel, Scomber japonicus, was examined. The semi-salted and dried mackerel fillets were packed in laminated plastic film bags (polyester/nylon/casted polypropylene: $12{\mu}m/15{\mu}m/60{\mu}m,\;15{\times}16cm$) filled with air (control, C), nitrogen gas (N), deoxygenized air (O) prepared by using free-oxygen absorber enclosed in the bag, in vacuum(V), and stored at $5^{\circ}C$. The quality of packed sample during the storage were examined in terms of viable cell counts of bacteria, thiobarbituric acid(TBA) value, perozide value(POV), volatile basic nitrogen(VBN), trimethylamine(TMA), adenosine triphosphate(ATP) and its related compounds and sensory evaluation. The results obtained are as follows: The pH of all the samples was in the range of $6.1{\pm}0.2$, and the contents of VBN and amino nitrogen of them increased during storage. In color values, L value(lightness) decreased while a and b values (red and yellow) revealed a tendency to increase during storage. The viable cell counts of the control sample(C) increased to $3.0{\times}10^6/g$ after 15 days storage but those of the other samples(V, N and O)were in the range of $2{\sim}6{\times}10^5/g$ after 20 days storage. The content of TMA increased during storage, but the histamine content showed a little change during storage and its content of all samples were less than 16 mg/100g. The inosinic acid(IMP) was rapidly degraded while inosine and hypoxanthine increased during storage. The TBA value of the control(C) reached a peak in 9 days and then decreased gradually while that of the sample(O) showed a little change during storage. The changes in POV of all the samples during storage showed a similar tendency to the TBA value. Fatty acid composition of raw mackerel consists of $35.6\%$ of saturated acid, $30.3\%$ of monoenoic acid and $34.2\%$ of polyenoic acid. The major fatty acid of the sample products were oleic acid($C_{18:1}$), palmitic acid($C_{16:0}$), docosahexaenoic acid($C_{22:6}$). The contents of polyenoic acid such as $C_{22:6},\;C_{20:5}$ decreased during storage while the other fatty acids showed a little change. From the results of sensory evaluation, the shelf-life of the control sample(C) was about 7 days and that of sample(V), (N) and (O) was about 15 days. It was concluded that deoxygenized atmosphere(free-oxygen absorber enclosed in the bag) was a good condition for preserving the quality of semi-salted and dried mackerel.

  • PDF