• 한국식품조리과학회지
• /
• 제9권1호
• /
• pp.43-51
• /
• 1993

Buckwheat protein isolate was tested for the effects of pH, addition of sodium chloride and heat treatment on solubility, emulsion capacities, emulsion stability, surface hydrophobicity, foam capacities and foam stability. The solubility of buckwheat protein isolate was affected by pH and showed the lowest value at pH 4.5, the isoelectric point of buckwheat protein isolate. The solubility significantly as the pH value reached closer to either ends of the pH, i.e., pH 1.0 and 11.0. The effects of NaCl concentration on solubility were as follows; at pH 2.0, the solubility significantly decreased when NaCl was added; at pH 4.5, it increased above 0.6 M; at pH 7.0 it increased; and at pH 9.0 it decreased. The solubility increased above $80^{\circ}C$, at all pH ranges. The emulsion capacity was the lowest at pH 4.5. It significantly increased as the pH approached higher acidic or alkalic regions. At pH 2.0, when NaCl was added, the emulsion capacity decreased, but it increased at pH 4.5 and showed the maximum value at pH 7.0 and 9.0 with 0.6 M and 0.8 M NaCl concentrations. Upon heating, the emulsion capacity decreased at acidic pH's but was maximised at pH 7.0 and 9.0 on $60^{\circ}C$ heat treatment. The emulsion stability was the lowest at pH 4.5 but increased with heat treatment. At acidic pH, the emulsion stability increased with the increase in NaCl concentration but decreased at pH 7.0 and 9.0. Generally, at other pH ranges, the emulsion stability was decreased with increased heating temperature. The surface hydrophobicity showed the highest value at pH 2.0 and the lowest value at pH 11.0. As NaCl concentrationed, the surface hydrophobicity decreased at acidic pH. The NaCl concentration had no significant effects on surface hydrophobicity at pH 7.0, 9.0 except for the highest value observed at 0.8 M and 0.4 M. At all pH ranges, the surface hydrophobicity was increased, when the temperature increased. The foam capacity decreased, with increased in pH value. At acidic pH, the foam capacity was decreased with the increased in NaCl concentration. The highest value was observed upon adding 0.2 M or 0.4 M NaCl at pH 7.0 and 9.0. Heat treatments of $60^{\circ}C$ and $40^{\circ}C$ showed the highest foam capacity values at pH 2.0 and 4.5, respectively. At pH 7.0 and 9.0, the foam capacity decreased with the increased in temperature. The foam stability was not significantly related to different pH values. The addition of 0.4 M NaCl at pH 2.0, 7.0 and 9.0 showed the highest stability and the addition of 1.0 M at pH 4.5 showed the lowest. The higher the heating temperature, the lower the foam stability at pH 2.0 and 9.0. However, the foam stability increased at pH 4.5 and 7.0 before reaching $80^{\circ}C$.

• 한국식품조리과학회지
• /
• 제6권3호통권12호
• /
• pp.9-15
• /
• 1990

Peanut prptein isolate was tested for the purpose of finding out the effect of pH, Sodium Chloride concentration and heat treatment on the solubility, surface hydrophobicity, foam expansion and foam stability. The solubility of peanut protein isolate was affected by pH and showed the lowest value at pH 4.5. When the peanut protein isolate was heated, the solubility decreased at pH 3 and pH 7 but at pH 9 solubility increased. At all pH range, solubility decreased as NaCl was added. The surface hydrophobicity of peanut protein isolate showed the highest value at pH 1.5. Generally, at acidic pH range the surface hydrophobicity was high, but at alkaline region, the surface hydrophobicity increased as the temperature increased. And when NaCl was added, the surface hydrophobicity was also increased. Foam expansion of peanut protein isolate was no significant difference among the values about pH. When the peanut protein was heated and NaCl was added, foam expansion was increased at pH 7. Foam stability was significantly low at pH 4.5 and foam stability was increased at acidic pH region below pH 4.5. At pH 7 and pH 9, heat treatment above $60^{\circ}C$ increased foam stability. When NaCl was added, foam stability was significantly increased at pH 3 and pH 7.

• 한국식품조리과학회지
• /
• 제7권2호
• /
• pp.97-104
• /
• 1991

This study was carried out in order to study the protein functionality such as foaming and emulsifying properties by succinylation of peanut protein isolates. Succinylated and unsuccinylated peanut protein isolate was tested for to find out the effect of pH, heat treatment and sodium chloride concentration on the solubility, foam expansion, foam stability, emulsion capacity and emulsion stability. The results are summarized as follows; 1. Succinylation enhanced the solubility of peanut protein isotate (PPI). The solubility of succinylated PPI markedly increased at pH 4.5. When the protein solutions was heated, the solubility of succinylated PPI greatly increased than PPI at pH 3. With addition of NaCl, solubility of succinylated PPI increased at pH 7 and pH 9. 2. The foam expansion of PPI and succinylated PPI on pH was no difference between both proteins. Addition of NaCl and heat treatment caused steeply increased in foam expansion at pH 3. 3. The foam stability of PPI and succinylated PPI showed the lowest value at pH 4.5. When PPI and succinylated PPI was heated, foam stability of two proteins incensed at pH 3 and showed similar aspects between PPI and succinylated PPI. However, at pH 9 stability of succinylated PPI decreased by heat treatment over $60^{\circ}C$. 4. Emulsion capacity of succinylated PPI on pH was markedly increased and showed the highest value at pH 11. At pH 4.5 which is isoelectric point of PPI, emulsion capacity of PPI by succinylation improved than that of PPI. When succinylated PPI was heated, emulsion capacity was greatly increased at pH 2 and pH 7. With NaCl was added, emulsion capacity of succinylated PPI increased than that of PPI. 5. Emulsion stability of PPI and succinylated PPI was affected by pH and showed its highest value at pH 11. At pH 4.5, emulsion stability of succinylated PPI increased than that of PPI. Addition of NaCl and heat treatment caused slightly increased in emulsion stability of succinylated PPI.

• 분석과학
• /
• 제8권3호
• /
• pp.293-298
• /
• 1995

수용액에서 pH와 일정공급전위 변화에 따른 강철심에 도금된 놋쇠의 안정성을 교류 임피던스로 측정하여 연구하였다. 일정 pH에서 일정공급전위가 양전위로 감에 따라 코팅기공저항은 감소된다. 그 사실은 일정공급전위가 양전위로 감에 따라 도금된 놋쇠층이 용액에 더 용해됨을 나타낸다. 강철심에 도금된 놋쇠의 안정성은 pH=7.1 > pH=4.0 > pH=10.0 순으로 감소한다. 위와 같은 실험결과는 전자현미경 (SEM)/에너지분산분광계(EDS)의 자료에 의해 증명된다.

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.191-198
• /
• 2009

We have tested the stability of paeoniflorin, a new cosmetic ingredient, extracted from the roots of Paeoniae lactiflora. The stability of aqueous paeoniflorin solution at pH 3, 5 and 7 varied by adding buffer solution was tested at $0^{\circ}C,\;25^{\circ}C,\;40^{\circ}C,\;and\;65^{\circ}C$. The test was performed with or without UV light. The solution of paeoniflorin was stable at pH 3.0, however, the recovery rate of paeoniflorin was 40% at pH 7.0. The stability of paeoniflorin solution was decreased as the pH of paeoniflorin solution was increased by pH 7.0. The effect of storage temperature of paeoniflorin solution shows that the stability of paeoniflorin solution was decreased as the temperature was increased. The stability of paeoniflorin was rather good under UV light than the condition given above $40^{\circ}C$. The stability of paeoniflorin in W/O emulsions shows similar pattern to that of aqueous solution.

• Journal of Pharmaceutical Investigation
• /
• 제19권4호
• /
• pp.213-217
• /
• 1989

To formulate the stable preparation of Gingko extract injection and to evaluate the stability of the preparation, Gingko extract aqueous solutions having various pH values were prepared and the stability of ginskoflavonglycoside (GFG) was investlfated by high performance liquid chromatography. The stability of GFG decreased as pH increased, while the water solubility of Gingko extract decreased as pH decreased. The optimal pH of the Gingko extract aqueous solution was found to be pH 6.5. The shelf life $(T_{90%})$ of the Gingko extract aqueous solution of pH 6.5 at $20^{\circ}C$ was extrapolated to be four years.

• 한국식품과학회지
• /
• 제22권3호
• /
• pp.319-324
• /
• 1990

두유를 저장하고 유통하는 중에 크림층 분리와 침전물의 발생 등 현학안정성에 미치는 pH, 단백질과 유지함량, 유화제, 안정제, 당, 식염 및 칼슘염의 영향을 조사하였다. 두유현탁액은 pH가 증가할수록 침전의 발생이 적어져 pH 10에서는 저장하는 동안에 침전이 전혀 생성되지 않았다. 각종 안정제 중 0.03%의 카라기난을 첨가시 안정성이 가장 좋았으며 팜유를 1.5% 첨가시 glycerine monostearate와 sorbitan monostearate 등의 HLB값은 $5{\sim}6$에서 안정효과가 컸다. 두유 중 지방 함량에 따라 점도변화는 크지 않았지만 크림층 분리가 현저하였고 대두유보다는 팜유를 첨가시 안정성이 더 떨어졌다. 설탕 첨가량은 3%까지 안정성에 큰 영향을 주지않았고 식염은 0.5%까지는 첨가량이 증가할수록 안정성이 감소되었다. 각종 칼슘염 중에서는 모두 안정성을 저해하였지만 그 중에서 시트르산칼슘을 첨가시 안정성의 저해정도가 가장 적었다.

• 대한환경공학회지
• /
• 제38권5호
• /
• pp.228-235
• /
• 2016

아질산화 반응을 통한 nitrite 축적은 단축질소제거 혹은 anammox 공정 수립을 위해 필수적이고 이 반응의 속도가 전체 질소제거공정의 효율에 큰 영향을 미칠 수 있다. 본 연구는 부유 미생물 연속류 반응기에서 pH 농도가 암모니아 폐수(2,000 mgN/L) 처리에 주는 복잡하고 다양한 영향 들을 modeling과 실험을 통해 종합적으로 분석하였다. modeling 연구 결과 반응의 안정성(stability)은 pH에 의해 지대한 영향을 받으며, free ammonia 저해가 심해지는 알칼리성 환경일수록 안정적 운전 영역(stable region)은 축소되었다. 기질과 pH의 좌표 상에서 stable region과 unstable region을 가르는 경계(stability ridge) 근처에서 안정적인 최대반응속도를 얻을 수 있고, 이 운전조건에서 아질산 축적 가능성도 최대가 되었다. stability ridge 근처의 조건에서 반응기를 운전한 결과 아질산화속도는 안정적으로 약 $6kgN/m^3-d$까지 얻을 수 있었고, 아질산축적율은 약 99% 이었다. 그러나 unstable region에서는 부하증가를 통한 반복된 교란 결과 유출수 암모니아 농도가 회복 불가능한 상태로 상승하였다. Modeling 결과 고유(intrinsic) 최적 pH 값을 고정하여도 실험에서 관찰되는 최적 운전 pH는 사용 기질의 농도가 높을수록 낮아지는 것으로 나타났으며, 이는 문헌에서 보고된 경향과 일치 하였다. 본 연구의 modeling 조건에서 95% 아질산화(5%는 암모니아로 잔존)를 위한 최적 운전 pH는 ~8.0인 것으로 예측되었으나, anammox 유입수 생산을 위해 55% 아질산화하려 할 때의 최적 운전 pH는 ~7.2로 낮아 졌다.

• Archives of Pharmacal Research
• /
• 제20권6호
• /
• pp.643-646
• /
• 1997

Thermal stability of a red pigment, carthamin, frm Carthamus tinctorius was investigated to explore possible applications as natural color additives for foods, cosmetics, and nutraceuticals. Degree of degradation reactions of carthamin at acidic, neutral and alkaline conditions were determined with UV/V is spectral measurements. Decomposition half lives of carthamin at 25.deg. C were 4.0 h, 5.1 h, and 12.5 h at pH 5.0, pH 7.0, and pH 12.0, respectively, indicating that carthamin is much more stable at alkaline pH than acidic or neutral conditions. The activation energies of carthamin at pH 5.0, pH 7.0, and pH 12.0 were 15.6, 15.7 and 16.8 kcal/mol, respectively.

• Transactions on Electrical and Electronic Materials
• /
• 제6권1호
• /
• pp.29-32
• /
• 2005

Chemical mechanical polishing is an essential process in the production of copper-based chips. On this work, the stability of hydrogen peroxide ($H_{2}O_{2}$) as an oxidizer of copper CMP slurry has been investigated. $H_{2}O_{2}$ is known as the most common oxidizer in copper CMP slurry. But $H_{2}O_{2}$ is so unstable that its stabilization is needed using as an oxidizer. As adding KOH as a pH buffering agent, stability of $H_{2}O_{2}$ decreased. However, $H_{2}O_{2}$ stability in slurry went up with putting in small amount of BTA as a film forming agent. There was no difference of $H_{2}O_{2}$ stability between pH buffering agents KOH and TMAH at similar pH value. Addition of $H_{2}O_{2}$ in slurry in advance of bead milling led to better stability than adding after bead milling. Adding phosphoric acid resulted in the higher stability. Using alumina C as an abrasive was good at stabilizing for $H_{2}O_{2}$.