• Environmental Engineering Research
• /
• v.11 no.6
• /
• pp.303-310
• /
• 2006

The aim of this study is to assess the applicability of sericite in wastewater treatment particularly the removal of two important heavy metal toxic ions viz., Cu(II) and Pb(II) from aqueous solutions. The batch type experiments showed that sericite is found to be one of useful natural sorbent for the removal of these two cations from aqueous solutions and it is also to be observed that with the increase in sorptive concentration amount of metal uptake increases and the concentration dependence data obtained are fitted well for the Langmuir adsorption isotherm rather than Freundlich adsorption model. Further, the Langmuir monolayer adsorption capacity is found to be $1.674\;mg\;g^{-1}$ for Cu(II) and $4.697\;mg\;g^{-1}$ for Pb(II). Kinetic studies enabled, an apparent equilibria can be achieved between soild/solution interface within ca 10 mins for Cu(II) and ca 90 mins for Pb(II). Moreover, the removal behavior of sericite for these two metal ions is greatly influenced by solution pH.

• YAKHAK HOEJI
• /
• v.32 no.1
• /
• pp.86-94
• /
• 1988

Some rheological properties of subfractions for dextran in the molecular weights range from $3{\times}10^4$ to $2{\times}10^6$ was investigated at room temperature. The dependence of the viscosity on concentration, shear rate, pH & ionic strength, temperature and solvent effect was observed. From the experimental data the Mark-Houwink viscosity equation in water at $25^{\circ}C$ was determined for samples having the molecular weight ranging from $3{\times}10^4$ to $2{\times}10^6$ as$[{\eta}]=3.1{\times}10^{-3}\;Mw^{0.39}(in\;dl/g)$. The intrinsic stiffness of the dextran backbone was estimated by evaluating the 'characteristic ratio' $C_{\infty}$, which is below the 0.082. In the concentrated region, the viscosity was decreased with increasing shear rate and was exponentially decreased with raising temperature, the viscosity showed the maximum value at neutral condition. From the experimental data, it was concluded that dextran chain, linked by the ${\alpha}-1$, 6-glucosidic linkage, behaves like a flexible random coil chain in aqueous solution, dextran solutions were pseudoplastic power law fluids among the empirical models of non-Newtonian behavior. Urea was an active reagent which increases the viscosity and swells dextran while pyrididine and glycerol were inactive reagents. Also, it could be estimated that the formation of gel structure is promote to the neutral state, the molecular weight larger than $2{\times}10^5$, when electrolytic concentration is IN and Ureas is use to solvent.

• Journal of Korean Vacuum Science & Technology
• /
• v.7 no.1
• /
• pp.8-12
• /
• 2003

The effects of lattice strain on the magnetic and the transport properties of La$_{0.8}$Sr$_{0.2}$MnO$_3$films grown on a LaAlO$_3$ (001) substrate and on a La$_{0.8}$Sr$_{0.2}$MnO$_3$ layer have been studied. It was observed that the metal-insulator and the ferromagnetic transitions turn out to be at higher temperatures for the film deposited on La$_{0.8}$Sr$_{0.2}$MnO$_3$ layer with respect to that on LaAlO$_3$. The dependence of Curie temperature on the bulk and the Jahn-Teller strains has also been determined. determined.

• Applied Biological Chemistry
• /
• v.34 no.2
• /
• pp.125-129
• /
• 1991

This experiment was carried out to examine the MBC adsorption on clay minerals by the slurry method. The adsorption of MBC on Kaolinite nearly reached equilibrium after shaking lot 2hrs. but on Bentonite and Zeolite, 10hrs., respectively. The adsorption amount was in the order of Zeolite>Bentonite>Kaolinite, and Na-saturated clay mineral adsorbed more MBC than Mg-saturated clay mineral did. The more the amount of clay minerals, the more MBC was adsorbed by clay minerals, whereas the amount of MBC adsorbed per unit gram of clay minerals reduced and Kd value cf MBC was greatest on the Na-Zeolite. The lower the pH of the water-clay system at each concentration, the more MBC was adsorbed by clay minerals. The pH dependence of the adsorption of MBC may be due to protonation of MBC in acid solution.

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.135-140
• /
• 1998

Drag reduction produced by dilute solution of water soluble ionic polymer-surfactant complex under turbulent flow in a rotating disk apparatus(RDA) was investigated in this study. Three different molecular weights of polyacrylic acid(PAA) were adopted as drag reducing additives, and distilled water was used as a solvent. Experiments were undertaken to observe the dependence of drag reduction on various factors such as polymer molecular weight, molecular expansions and flexibility, rotating speed of the disk and polymer concentration. Specific considerations were put on conformational difference between surfactant and polymer, and effect of pH on ionic polymer possessing various molecular conformation through pH. The complex of ionic polymer and surfactant(Sodium Dodecyl Sulfate) behaves like a large polyelectrolyte. Surfactant changes the polymer conformation and then increases the dimension of the polymer. The radius of gyration, hydrodynamic volume and relative viscosity of the polymer-surfactant system are observed to be greater than those of polymer itself. Such surfactant-polymer complex has enhanced drag reduction properties.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.859-867
• /
• 1997

In order to utilize the processing wastes of squid, chitosans were manufactured from the pens of domestic squid, Todarbdes pacificus and foreign squid, Ommastrephes bartrami and then, its rheological properties were studied. The amounts of nitrogen and minerals of the domestic squid pens were $11.4\%\;and\;0.1\%$ respectively, whereas those of its chitosan were $7.5\%\;and\;0.2\%$. In case of foreign squid pen and chitosan, the amounts of nitrogen and minerals were $12.1\%,\;0.8\%\;and\;7.8\%,\;0.2\%$ respectively. Intrinsic viscosity $([\eta]) $ of domestic and foreign squid pen chitosans were decreased with increasing pH from 3.4 to 5.4 which might be due to the reduced repulsion in inter- of intra- chitosan molecules. Intrinsic viscosity of the domestic and foreign squid pen chitosans were decreased with increasing NaCl concentration thus indicated that the domestic and foreign squid pen chitosans were polyelectrolyte molecules and stiffness of squid pen thitosans were 0.11 similar to that of k-carrageenan. Flow type of squid pen chitosan solutions were pseudoplastic fluids without yield stress by the viscosity measurement. But the squid pen chitosan solutions showed newtonian fluid up to $0.15\~0.24\%$ concentration for domestic and $0.21\~0.24\%$ concentration for foreign at $10\~50\%$. Concentration dependence of consistency index in infinitive dilute domain (Kc) were higher in the dilute domain than entangled domain. Activation energies (Ea) of the squid pen chitosans were 3.7, 6.3, 3.6, 4.0 and 4.1 Kcal/g moi for domestic and 3.2, 3.1, 3.4, 3.8 and 3.6 Kcal/g mol for foreign at 0.1, 0.15, 0.25, 0.35 and $0.5\%$, respectively.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.3
• /
• pp.39-48
• /
• 2007

The stimulus of accommodation A, the stimulus of convergence C and the prism diopter ${\Delta}$ are reviewed and redefined more obviously. How the A and C are managed in the practice are reviewed and summarized. As a result, the common practical process of the binocular vision findings is most suitable in the case of the $l_c=26.67mm$, where the near distance is measured from the test lens to the near target and its value is 40 cm and the average of the P.D equal to 64 mm. The $l_c$ is the distance between the test lens and the center of rotation. Those values were used at calculating the various values in this paper. The error of the stimulus of accommodation values which are evaluated by the practically used formula (5) are calculated. Where the distance between lens and the principle point of eye is 15.07 mm ($=l_H$). The incremental stimulus of convergence values P' caused by the addition prism $P_m$ are evaluated by the recursion computation method. The P' are varied with the $P_m$, the distance $p_c$ between the prism and the center of rotation, the initial convergence value (or inverse target distance) $C_o$ and the refractive index n of the prism material. The recursion computation method and the other formulas are described in detail. In this paper n=1.7 is used. The two factors by which the P' is increased are exist. The one which is major is the property by which the values of convergence whose unit is ${\Delta}$ are not added in the generally way. The other is the that the actual power of the prism is varied with the angle of incidence light. And the P' is decreased remarkably by an increase in the $p_c$ and $C_o$. The $P^{\prime}/P_m$ are calculated and graphed which are varied with the $p_c$ and $C_o$, where the $P_m=20{\Delta}$, P.D=64 mm and n=1.7. The index n dependence of the $P^{\prime}/P_m$ is negligible (refer to fig. 6). The $p_c$ are evaluated at which the P' equal to the $P_m$ for various $P_m$ (refer to table 1). The actual values of the stimulus of convergence and accommodation which are manipulated simply in the practice are calculated. Two graphical forms are suggested. The one is like as the commonly used one. But the stimulus of convergence and of accommodation values in the practice are positioned at the exact positions when the graphic is made (refer to fig. 9). The other is the form that the incremental stimulus of convergence values caused by the addition prisms are represented at actual positions (refer to fig. 11).

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.4
• /
• pp.500-511
• /
• 1999

Background: Noninvasive positive pressure ventilation (NPPV) using facial or nasal mask have been widely used for several years in stable patients with chronic neuromuscular disease or central alveolar hypoventilation, and recently have been tried in patients with acute respiratory failure. In a few studies, NPPV was also used to rescue the patients with post-extubation respiratory failure. However, yet it has not been adopted as a weaning method in patients on long-term mechanical ventilation. So we performed this prospective clinical study to evaluate the usefulness of NPPV as a weaning method after removing endotracheal tube intentionally in patients on long-term mechanical ventilation. Method: Twelve patients who had been on invasive mechanical ventilation over 10 days were enrolled and 14 trials of NPPV were done. All had failed at least one weaning trial and showed ventilator dependence(pressure support requirement between 8-15cm $H_2O$, and PEEP requirement between 5-10cm $H_2O$), so tracheostomy was being considered. After removing the endotracheal tube, NPPV was applied using facial mask. Respiratory rate, arterial blood gas, pressure support level, and PEEP level were monitored just before intended extubation, at 30 minutes, 1 to 6, 6 to 12, 12 to 24 hours, 2nd day, and 3rd day following initiation of NPPV, and just before weaning from NPPV. The successful weaning was defined as spontaneous breathing off the ventilator for 48 hours or longer without respiratory distress. Results: The weaning through NPPV after intended extubation was successful in 7(50%) of 14 trials, and tracheostomy could be avoided in them. There were no differences in age, sex, APACHE III score, duration of invasive mechanical ventilation, baseline respiratory rate, $PaCO_2$ $PaO_2/FiO_2$, and ventilatory requirement(PS and PEEP) between the success and failure groups. In the success group, respiratory rate, pH, $PaCO_2$, and $PaO_2/FiO_2$ were not different between invasive MV and NPPV period. But in the failure group, pH decreased after 30 minutes of NPPV initiation compared with that of invasive MV($7.40\pm0.08$ vs. $7.34\pm0.06$, p<0.05). The causes of failure were worsening of ABG(n=3), retained tracheal secretion(n=2), mask intolerance(n=1), and flail chest(n=1). Conclusion: NPPV may be worth trying as a bridge method in weaning patients on long-term invasive mechanical ventilation.

• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.704-709
• /
• 1994

The $(LaS)_xCrS_2(x \approx 1.20$) of the incommensurate misfit layer was systhesized from reactant mixture of$La_S_3$,Cr and S at 1273K. Powder X-ray diffration of $(LaS)_xCrS_2(x \approx 1.20$) was indexed as a complex structure consisted with a monoclinic LaS-sublattice, a triclinic $CrS_{2}$-sublattice and their superlattice. The temperature dependence of sublattice dimension was investigated by the X-ray diffraction analysis at low temperature. The magnetic susceptibility of $(LaS)_xCrS_2(x \approx 1.20$) was measured between 77K and room temperature using a Faraday balance method. $(LaS)_xCrS_2(x \approx 1.20$) was paramagnetic on a $\sigma$-H plot at room temperature. The observed effective magnetic moment( p dr) was in fair agreement with the value calculated by spin-only contribution for $Cr^{3+}$ and spin and orbital contribution for $La^{3+}$.

• Journal of the Korean Magnetic Resonance Society
• /
• v.3 no.2
• /
• pp.100-108
• /
• 1999

Cop protein is the transcription repressor protein in rolling circle replication plasmid. With antisense RNA, Cop protein controls the copy number of plasmid. Cop family proteins have been found in various plasmids. Among Cop family proteins, Cop studied in this paper consists of 55 amino acids (Mw. 6,400), and was known to have trimer structure. Since no structural facts are elucidated, we have carried out preliminary experiments aimed at the elucidation of its three dimensional structure. The secondary structure of Cop is studied by CD and NMR. To solve the aggregation of Cop at high concentration, we tested various detergents and salts. The addition of detergents and salts could not solve the aggregation problem. However, we found that concentration is important in solving the aggregation problem. We knew that 0.18mM in 50mM potassium phosphate without any other ingredients is maximum concentration not to aggregate. Wa also investigated the pH dependence of Cop protein, and knew that Cop protein is more stable in acid state. At various temperatures, 15N-1H HSQC spectra were measured in order to find the optimal experimental condition. To enhance the peak resolution, 3D NOESY-HSQC spectrum is acquired. Since there are NOE peaks in the NH-NH region, we knew that Cop protein has $\alpha$-helical content, which was also confirmed by CD.