• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.233-244
• /
• 2001

Stress-strain behaviour of soil varies based on stress path and stress history. There has been few study on the characteristics of yielding curve which has anisotropic compression stress history in decomposed granite soil. During this study, various stress path tests in previous anisotropic compression stress history are performed on compacted decomposed granite soil sampled at Iksan, Chonbuk. Yielding points are determined from various stress-strain curves (${\eta}-{\varepsilon}$, ${\eta}$-v, and ${\eta}$-k, ${\eta}$-W curves). Stress-strain curve is certified which shows yielding point very clearly. The shape and characteristics of anisotropic compression yielding curves are examined. The main results are summarized as follows : 1) p' constant and compressive direction in stress paths, which has experienced previous anisotropic compression stress history, shows relatively dear yielding points. 2) Yielding curves defined from ${\eta}$-k and ${\eta}$-W curve show almost perfect ellipse. 3) Directions of plastic strain incremental vector($dv^p/d{\varepsilon}^p$) are not perpendicular to yielding curve.

• 한국제4기학회지
• /
• 제18권1호통권22호
• /
• pp.31-39
• /
• 2004

東北 日本의 후빙기 사면붕괴 이력을 복원하기 위하여 3지역(川통盆地, 茂庭, 高田濕原, 根白石濕原)의 습지 퇴적물의 화분조성과 무기질함량을 대상으로 安定-不安定 曲線 그래프(이하 S-U曲線)와 灼熱減量 曲線 그래프(이하 IL曲線)를 작성하였다. 그 결과, S-U曲線에 의하면 사면붕괴 발생빈도가 높은 시기는 川통盆地에서는 약 5,600~4,670yrB.P.의 1회, 茂庭 $\cdot$ 高田濕原에서는 약 6,390~5,070yrB.P.와 약 4,750~3,800yrB.P.의 2회, 根白石濕原에서는 약 6,630~6,070yrB.P., 약 5,890~5,360yrB.P. 및 약 5,000~4,650yrB.P.의 3회가 확인되었다. 그리고 IL曲線에 의하면 사면붕괴 발생빈도가 높은 시기는 川통盆地에서는 약 5,600~5,140yrB.P.의 1회, 茂庭 $\cdot$ 高田濕原에서는 약 6,390~6,170yrB.P.와 약 4,750~2,840yrB.P.의 2회가 확인되었다. 이와같은 분석결과는 선행연구에서 조사지역의 지형 $\cdot$지질단면도로부터 추정된 결과와 매우 유사한 경향을 나타내는 것으로 판명되었다.

• 한국압력기기공학회 논문집
• /
• 제15권2호
• /
• pp.1-8
• /
• 2019

The integrity of the Reactor Pressure Vessel (RPV) is affected by the neutrons bombarding the vessel wall leading to embrittlement. This irradiation-induced embrittlement leads to reduction in the fracture toughness of RPV materials. This paper presents a comparative study of typical Optimized Power Reactor (OPR)1000 reactor pressure-temperature (P-T) limit curves using the pre-2006 American Society of Mechanical Engineers (ASME) editions used in the power plant and the current ASME edition of 2010. The current ASME Code utilizes critical reference stress intensity factor based on the lower bound of static, while the Pre-2006 ASME editions are based the critical reference stress intensity factor based on the lower bound of static, dynamic and crack arrest. Model-Based Systems Engineering approach was used to evaluate ASME Code Section XI Appendix G for generating the P-T limit curves. The results obtained from this analysis indicate decrease in conservatism in P-T limit curves constructed using the current 2017 ASME code, which can potentially increase operational flexibility and plant safety. Hence it is recommended to use ASME code edition after 2006 be used in all operating nuclear power plants (NPPs) to establish P-T limit curve.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.143-144
• /
• 2010

강도 설계법에 기반을 둔 콘크리트구조설계기준은 전 응력의 계산이 불가능하기 때문에 한계 상태 설계법에 근간을 둔 EC2와 휨 압축부재의 P-M상관도를 비교분석하였다. 해석결과, 설계기준에 따라 P-M상관도는 거의 유사하였지만 피복두께가 클 경우 EC2에 의한 값이 보다 안전 측에 해당하였다.

• 대한수학회지
• /
• 제54권1호
• /
• pp.69-86
• /
• 2017

The point $P{\in}{\mathbb{P}}^2$ is referred to as a Galois point for a nonsingular plane algebraic curve C if the projection ${\pi}_P:C{\rightarrow}{\mathbb{P}}^1$ from P is a Galois covering. In contrast, the point $P^{\prime}{\in}C^{\prime}$ is referred to as a weak Galois Weierstrass point of a nonsingular algebraic curve C' if P' is a Weierstrass point of C' and a total ramification point of some Galois covering $f:C^{\prime}{\rightarrow}{\mathbb{P}}^1$. In this paper, we discuss the following phenomena. For a nonsingular plane curve C with a Galois point P and a double covering ${\varphi}:C{\rightarrow}C^{\prime}$, if there exists a common ramification point of ${\pi}_P$ and ${\varphi}$, then there exists a weak Galois Weierstrass point $P^{\prime}{\in}C^{\prime}$ with its Weierstrass semigroup such that H(P') = or , which is a semigroup generated by two positive integers r and 2r + 1 or 2r - 1, such that P' is a branch point of ${\varphi}$. Conversely, for a weak Galois Weierstrass point $P^{\prime}{\in}C^{\prime}$ with H(P') = or , there exists a nonsingular plane curve C with a Galois point P and a double covering ${\varphi}:C{\rightarrow}C^{\prime}$ such that P' is a branch point of ${\varphi}$.

• Structural Engineering and Mechanics
• /
• 제14권2호
• /
• pp.191-208
• /
• 2002

A comparative assessment study for a generation of the pressure-temperature (P-T) limit curve of a reactor vessel is performed in accordance with ASME code. Using cooling or heating rate and vessel material properties, stress distribution is obtained to calculate stress intensity factors, which are compared with the material fracture toughness to determine the relations between operating pressure and temperature during reactor cool-down and heat-up. P-T limit curves are analyzed with respect to defect orientation, clad thickness, toughness curve, cooling or heating rate and neutron fluence. The resulting P-T curves are compared each other.

• 한국물환경학회지
• /
• 제33권6호
• /
• pp.650-660
• /
• 2017

In this study, pollutant emission characteristics by water damage period analyzed 11 items (water temperature, pH, DO, EC, BOD, COD, TOC, SS, T-N, T-P and flow) with load duration curve, time series load curve and factor analysis for three years (2014-2016). Load duration curve is applied to judge the level of impaired waterbody and estimate impaired level by pollutants such as BOD and T-P in this study depending on variation of stream flow. Water quality standard exceeded the flow of mid-range and low-range by flow condition evaluation using load duration curve. This watershed was influenced by point source more than non-point source. Cumulative excess rate of BOD and T-P kept water quality standard for all seasons (spring, summer, autumn and winter) except BOD 59% in spring. Water quality changes were influenced by pollutants of basic environmental treatment facilities and agricultural areas during spring and summer. Results of factor analysis were classified commonly first factor (BOD, COD, and TOC) and second factor (flow, water temperature and SS). Therefore, effects of artificial pollutants and maintenance water must be controlled seasonally and reduced relative to water damage caused by point pollution sources with effluent standard strengthened in the target watershed.

• 환경영향평가
• /
• 제22권4호
• /
• pp.319-327
• /
• 2013

This study was conducted to identify runoff characteristics of pollutants using flow duration curve(FDC) and load duration curve(LDC) in Youngbon A watershed during 2009~2011. A flow rate and pollutant load in the study watershed were estimated by equation of stage-discharge and discharge-loads rating curve. From these methods, BOD, T-N, and T-P have evaluated whether water quality standards would have attained. Results showed that BOD loads of about 50% plotted above the LDC, while T-N and T-P loads of about 50% plotted below the curve. It means that BOD of about 50% have exceeded the water quality criteria, while T-N and T-P of about 50% have complied with the water quality standards. Meanwhile, BOD, TN and T-P loads plotted above the LDC of low flows, implying that they were more affected by point pollution sources than nonpoint pollution sources in the study watershed.

• 호남수학학술지
• /
• 제33권2호
• /
• pp.153-161
• /
• 2011

Greg([Greg]) considered that $$N_k= \sum\limits_{i=1}^k(-1)^{i+1}P_{i,k}(p)N_1^i$$ where the $P_{i,k}$'s were polynomials with positive integer coefficients. In this paper, we will give the equations for $\sum\limits{P_{i,k}$ modulo 3. Using this, if we send a information for elliptic curve to sender, we can make a new checksum method for Manchester coding in IEEE 802.3 or IEEE 802.4.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.124.1-124
• /
• 2001

Control of pH neutralization process plays a very important role in some chemical process. Because of their high nonlinearity, frequent disturbance, and time-varying characteristics, it is difficult to control and estimate pH processes. For the adaptive control of pH processes, a lot of researchers have made an efforts in the modeling and control of pH processes. It is very difficult to obtain information of influent stream such as concentrations and dissociation constants and the titration curve equation is very complex. Therefore, several simple models, which hate small number of unknown parameters and estimate the titration curve, have been available, These models were considered here and were transformed into forms that can applied the linear least square method.