• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.877-878
• /
• 2011

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.203-203
• /
• 2000

The P&S(Power Plant Simulation System) is a powerful simulation software system for the dynamic behavior of power plants. The P&S module libraries provide plant models with higher flexibility of dynamic simulations for process and control designs. The P&S software was effectively available for PCS based on Linux and modem workstations based on Unix. The P&S was applied for simulating the dynamic behaviors of the SOVR(Supercritical Once-Through Variable Pressure Reheater) according to the operations such as stan-up, shutdown, load following, load change and trip in order to obtain an optimal operation procedure for Unit 5/6 of Taeahn fossil power plant consisted of SOVRs and steam turbines.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.2
• /
• pp.187-194
• /
• 2012

The strength of particle-reinforced metal matrix composites is, in general, known to be increased by the geometrically necessary dislocations punched around a particle that form during cooling after consolidation because of coefficient of thermal expansion (CTE) mismatch between the particle and the matrix. An additional strength increase may also be observed, since another type of geometrically necessary dislocation can be formed during extensive deformation as a result of the strain gradient plasticity due to the elastic-plastic mismatch between the particle and the matrix. In this paper, the magnitudes of these two types of dislocations are calculated based on the dislocation plasticity. The dislocations are then converted to the respective strengths and allocated hierarchically to the matrix around the particle in the axisymmetric finite-element unit cell model. The proposed method is shown to be very effective by performing finite-element strength analysis of $SiC_p$/Al2124-T4 composites that included ductile failure in the matrix and particlematrix decohesion. The predicted results for different particle sizes and volume fractions show that the length scale effect of the particle size obviously affects the strength and failure behavior of the particle-reinforced metal matrix composites.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.524-531
• /
• 2017

Water quality improvement was predicted by using ecological modelling with reference to reduced load pollutants in the Busan coastal area. The results showed appreciable improvement in water quality at Suyeong Bay and Nakdong Estuary but little improvement in water quality from the central to eastern regions, except in Suyeong Bay by COD concentration. There were also similar results for T-N and T-P, because the Busan coastal area has a more open boundary than the other bays in the South Sea of Korea, resulting in a fast flow rate. The reducted COD load was less than that found in other coastal areas. Also, the reduction rate of the total load was less than that of other coastal areas in terms of water quality improvement. Applying the reduction load estimated in this study, it should be possible to improve the water quality of Suyeong Bay and Nakdong Estuary.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.3 s.333
• /
• pp.39-44
• /
• 2005

The OFDM modulation and transmission block have been modeled in order to analyse the relationship between the 2.4GHz power amplifier distortion and output ACPR for the IEEE 802.11g wireless LAN. The nonlinear characteristic of the power amplifier has been modeled as AM-to-AM and AM-to-PM using the behavioral model, and the output spectrum is analysed with the phase distortion variation. Also, amplifier back-off value from P1dB to satisfy the required IEEE 802.11g standard spectrum mask s been simulated with modeled phase distortion, and the simulation data have been compared to the measured result by using the pre-distortion technique.

• ICROS
• /
• v.3 no.5
• /
• pp.58-64
• /
• 1997

pH 공정은 비선형이며, 입력흐름의 성분과 농도가 바뀜에 따라 비선형성이 급격히 바뀌는 적응제어가 요구되는 공정이다. 최근 이 공정에 대한 모델링 기법이 확립되고, 매우 작은 수의 변수를 갖는 parameterization이 제안되어 간단한 형태의 우수한 적응제어법이 구성되어 있다. 그러나 estimation의 windup은 선형 시스템의 적응제어법에서와 마찬가지로 큰 문제점으로 남아있다. 본 고에서는 pH 공정의 적응제어법을 간략히 살펴보았으며 좀 더 견실하고 우수한 성능을 주는 방법을 위하여 두 가지 제안을 하였다. 한 제안은 기존의 변수 estimation의 목적함수가 제어기 성능에 직접적이지 못한 것을 바로 잡으려는 것이다. 새로 제안한 것을 적응제어에 바로 이용하는데 아직 걸림돌이 몇몇 남아 있어 연구가 요구되고 있다. 또 한 제안은 estimation windup을 해결하려는 것으로 pH 공정 특성상 나타나는 것으로 바로 pH 공정 적응제어에 이용될 수 있다.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.9-12
• /
• 2000

InP/lnGaAs heterojunciton phototransistors (HPTs) with transparent emitter contacts were fabricated and characterized. Indium Tin Oxide was RF sputtered for the emitter contacts. By comparison with InP/InGaAs HBTs, the dc characteristics of InP/lnGaAs HPTs demonstrated offset voltage due to ITO emitter contacts and similar common emitter current gain. The model parameters were extracted and a simple SPICE simulations were performed.

• Korea Information Processing Society Review
• /
• v.10 no.2
• /
• pp.9-21
• /
• 2003

최근 들어 서비스 가용도(Availability) 만족에 대한 중요성이 인터넷 기반 서비스 및 응용들의 성패에 가장 결정적인 요소 중의 하나로서 인식되고 있다. 이에 따라, 본 기고에서는 서비스 품질(Quality of Service: QoS)을 기존의 성능 향상 관점에서보다는 가용도 증대의 관점에서 다뤄 보고자 한다. 먼저 가용성 품질(Quality of Availability: QoA)이라는 새로운 개념을 소개하고, 가용도를 QoS의 새로운 평가 척도로써 제어 및 관측 가능한 QoS 파라메터로 정의하는 한편, 인터넷 기반 광역 분산 시스템의 특성에 맞는 가용성 정의를 정립해 본다. 특히 Peer-to-Peer (P2P) 시스템 등과 같이 시스템과 사용자 접속의 동적 변화가 잦은 시스템을 대상으로, 복제(Replication) 기술을 이용한 서비스 가용성 품질 향상 문제를 집중적으로 다뤄본다. 이를 위하여 P2P시스템과 복제기반 분산 서비스를 Stochastic그래프로 모델링해보고, 시뮬레이션 공부를 통하여 여러 가지 복제정책(알고리즘)을 대상으로 서비스 가용성 품질 향상정도를 품질 만족과 보장이라는 차원에서 각각 조사해 본다.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.8
• /
• pp.351-358
• /
• 2001

This paper deals with the PSS modeling of Ulchin N/P #1 as well as the generator and excitation system modeling by utilizing the recorded data from AVR step test, which has been performed by entering small voltage signal into the AVR summing point. In addition to it. two recorded results obtained from the AVR step test with PSS sunning and without PSS running have not only been compared each other on the time domain, but also they heve been analyzed with FFT analysis on the frequency domain; thus, the desirable effects of running PSS in Ulchin N/P #1 on power system have been explicitly confirmed. Finally, the derived PSS model parameters lead to good matches between simulation results and recorded data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.247-249
• /
• 2017

NIST에서 표준으로 정의된 P-192, P-224, P-256, P-384 타원곡선 상의 스칼라 곱셈(scalar multiplication) 연산을 지원하는 Scalable 타원곡선 암호(Elliptic Curve Cryptography; ECC) 프로세서의 설계에 대해 기술한다. 투영(projective) 좌표계를 이용하여 하드웨어 자원 소모가 큰 나눗셈 연산을 제거하였으며, GF(p) 상의 덧셈, 뺄셈, 곱셈 등의 유한체 연산을 지원한다. 워드 기반 몽고메리 곱셈기를 이용하여 다양한 크기의 필드(field)에서 고정된 하드웨어 자원을 통하여 곱셈 연산을 수행하도록 하였으며, 필드의 크기에 따라 연산 사이클이 증가하거나 감소한다. 설계된 Scalable ECC 프로세서는 Verilog HDL로 모델링 되었으며, Modelsim을 이용한 기능검증을 하였다. Xilinx Virtex5 FPGA 디바이스 합성결과 5,376-비트 RAM과 970 슬라이스로 구현되었으며, 최대 55 MHz의 동작 주파수를 갖는다.