• Child Health Nursing Research
• /
• v.5 no.3
• /
• pp.241-249
• /
• 1999

Diaper dermatitis, or commonly called 'diaper rash', is among the most prevalent cutaneous disorders of infancy and early childhood and important issue in nursing. The term itself is not diagnostic since it encompasses a variety of acute inflammatory reactions which are best regarded as a family of disorders arising from a combination of factors specifically attributable to the use of diapers Intensive study of the rash Process has shown that skin wetness and fecal enzyme activity are damaging to skin and lead to the development of diaper rash. This suggests that it is important to keep urine away from babies' skin, so that the skin remains as dry as Possible and maintains its barrier function abilities. Controlling the urine will also minimize the mixing of urine and feces within the diaper. which helps prevent the increased activity of enzymes that attack the skin and cause irritation. Therefore, a diaper that keeps the skin drier and limits the mixing of urine and feces will help Prevent the conditions that lead to diaper rash. Since their introduction about 35 years ago, disposable baby diapers have undergone many design and performance changes. In Particular. the Performance of diapers was advanced by the introduction of absorbent gel materials (AGMs) to Provide advantages in skin care. dryness, and leakage Protection Especially, important was the introduction of AGM which increased the absorbent capacity of the diaper several fold and Yielded marked reductions in the degree of skin hydration occurring under the diaper Studies show not only drier skin but more stable skin pH and less dermatitis with AGM diapers than with home-laundered cloth diapers or single-use diapers without AGM Minimizing diaper area skin wetness is important for managing and Preventing diaper rash. To minimize wetness, parents should use super absorbent diapers.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.3
• /
• pp.369-375
• /
• 1997

Studies were conducted to determine the efficiency of decondensation protocols. Sperm obtained from seven normal donors was immediately washed after liquefaction and then decondensed using the method of West et al. (1989) and my original protocol. My optimized protocol entailed mixing 1 ml aliquots of semen with 4 ml phosphate buffered saline (PBS). Following centrifugation, pellets were resuspended in 1 ml PBS containing 6 mM EDTA. After centrifugation, pellets were resuspended in 1 ml PBS containing 2 mM dithiothreitol at $37^{\circ}C$ for 45 min. Following mixing with 2 ml PBS and centrifugation, pellets were resuspended by vortexing. While vortexing, 5 ml of fixative were gently added. Slide preparation was accomplished using the smear method and it was stored at $4^{\circ}C$. When comparing these protocols, the degree of sperm decondensation and head swelling was monitored by measuring nuclear length, area, perimeter, and degree of roundness using FISH analysis software. Apparent copy number for chromosome 1 and, separately, for the sex chromosomes was determined by FISH using satellite DNA probes for loci DIZ1, DXZ1 and DYZ3. Sperm treated by my decondensation protocol showed significant increases (p<0.05) in length, area, perimeter, and degree of roundness. There was a significant decrease (p<0.05) in the frequency of nuclei displaying no signal but no change in the frequency of nuclei with two signals in samples decondensed by my protocol. My data suggested that decondensation using my original protocol may lower the frequency of cells with spurious "nullisomy" due to hybridization failure without inducing spurious "disomy" resulting from increased distances between split signals.

• Resources Recycling
• /
• v.5 no.1
• /
• pp.3-8
• /
• 1996

CZS(2Ca0 , SiO\ulcorner) phase of cement clinkcr was obtaincd by melting mixcd four indnstrial wasles of limestone sludge, waste Foundry sand, coal lly ash fiorn power plants and chernicas glasses. The effect ot mixing ratio of four rvastc mater~als ou the composnlg phascs in melled slag was investigated. Thc mixed wastes were meltcd to slag by heat under a constant basicity at 1370C. The shg consisted of p -CIS and C,AS(2CaO - A I P , . SiO,). The ratio of two phases was varied with mixing ~atioo f the waste materials. In order Lo increasc the amount ot j -C2S phase, the coal fly ash content should be reduced, while amount of the chemical glass be increased. The coal fly ash contcnt was the most imporlant factor in controlling phases of thc melted-slag.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.57-65
• /
• 2019

In this study, the quality characteristics of the mother material of panel were evaluated for the production of moss panel using alumina cement and biological characteristics and environmental impact characteristics of moss panel were evaluated. The ratio of W/B 10%, Vs/Vm 20% and foaming agent 0.5% were selected as the basic mixing ratio for the mother panel of moss panel through pretest and SAP was added to improve the moisture content of panel. The optimal mixing ratio of SAP was considered to be less than 0.5% considering the quality characteristics. Also, through the use of alumina cement, the pH of the panel could be lowered to 10~11. The panel was able to improve the surface roughness through the foaming agent, and it was confirmed that the SAP had an effect of improving the moisture content of the panel. For the environmental impact characteristics of the moss panel, the moss panel evaluated the carbon dioxide reduction performance and the fine dust cleaning performance.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.155-160
• /
• 2011

An animal fat is an attractive biodiesel energy source for its high stability against oxidation and low incomplete combustion ratio due to the high heating value and cetane value. However, it requires a refinery process because of the high content of saturated acid and impurity which increas the boiling point. In this study, the optimum biodiesel synthetic process of lard is suggested. Indeed, we demonstrate new biodiesel production processes to alter conventional process of heating and mixing by applying ultrasonic energy. While the optimum reaction temperature and mole ratio of methanol and lard, when using conventional mixing and heating process, were $55^{\circ}C$ and 12, respectively, the reaction time were reduced to 30 minutes by applying ultrasonic irradiation power of 500 W. The new process applying ultrasonic irradiation yielded synthetic biodiesel properties as followings: 3.34 cP of the viscosity, 37.0 MJ/kg of the caloric value and below 0.25 mgKOH/g of the acidic value, which satisfy biodiesel quality criteria.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.4
• /
• pp.424-430
• /
• 2022

In the study, Ni²⁺ (nickel) removal from synthetically prepared wastewater by electrocoagulation method, which is one of the electrochemical treatment processes, was investigated and parameters such as current density, pH, mixing speed, initial Ni²⁺ concentration, supporting electrolyte type and concentration were determined to determine Ni²⁺ removal efficiencies effects were studied. Experiment conditions during 30 minutes of electrolysis; the current density was determined as 0.95 mA/cm², the initial pH of the wastewater was 6, the mixing speed was 150 rpm, and the initial nickel concentration was 250 mg/L. The Ni²⁺ removal efficiency was obtained as 75.99% under the determined experimental conditions, while the energy consumption was calculated as 3.15 kW-h/m³. In the experiments, it was observed that the type and concentration of the supporting electrolyte did not have a significant effect on the Ni²⁺ removal efficiency. In the trials where the effect of the support electrolyte concentration was examined, the Ni²⁺ removal efficiency was 75.99% in the wastewater environment without the supporting electrolyte, while the Ni²⁺ removal efficiency was 81.55% when 7.5 mmol/L NaCl was used after the 30-minute reaction, and the energy consumption was 2.15 kW-h/m³ obtained as. As a result of the studies, it was concluded that the electrocoagulation process can be applied in the treatment of wastewater containing Ni²⁺.

• Clean Technology
• /
• v.15 no.3
• /
• pp.202-209
• /
• 2009

N-incorporated $WO_3$ ($WO_3$:N) films were synthesized using a reactive RF magnetron sputtering on unheated substrate and then post-annealed at different temperatures from 300 to $500^{\circ}C$ in air. The N anion narrowed optical band gap, due to its mixing effect with the O 2p valence states. Furthermore, it was found that the crystallinity of the $WO_3$:N films was significantly improved by the post-annealing at $350^{\circ}C$ and higher. As a result, the $WO_3$:N films exhibited much better photoelectrochemical performance, compared with pure $WO_3$ films post-annealed at the same temperature.

• Journal of Oral Medicine and Pain
• /
• v.35 no.2
• /
• pp.135-147
• /
• 2010

In this study, the objective masticatory efficiency of two groups of temporomandibular disorder patients, pain and sound groups, was compared with that in a normal group using the MAI (mixing ability Index). The subjective chewing ability was evaluated using questionnaires, such as the Food Intake Ability Index (FIA) and Visual Analogue Scale (VAS). The Oral Health Impact Profile (OHIP)-49K of the patients was also examined to measure the oral health-related quality of life. The results were as follows: 1. The MAI, FIA and VAS in the pain group were significantly lower than in the normal and sound groups. This shows that the chewing efficiency of the pain group was lower than the normal and sound groups (P<0.05). However, there was no significant difference between the sound and normal groups. 2. The OHIP-49K for the oral health-related quality of life showed a significant increase in both the pain and sound groups compared with normal group. This means that the oral health-related quality of life was lower in both the pain and sound groups. 3. There was a correlation between the MAI, FIA and VAS (P<0.01) in all subjects (71 persons). The OHIP-49K was associated with the FIA and VAS. 4. There was a correlation between the FIA and VAS (P<0.05) in the sound group but no correlation in the other groups. 5. There was a correlation between the FIA and VAS in all groups. 6. The VAS was increased significantly in the pain group according to the level of pain reduction after treatment (P<0.05). However, there was no significant increase in the MAI, even though there was an improvement in masticatory efficiency. In addition, there was no difference in the FIA and OHIP-49K according to the level of pain reduction after treatment. In this study, it is believed that pain is a main factor decreasing the masticatory efficiency in patients with temporomandibular disorders. Moreover, TMJ sounds decrease the quality of life but do not decrease the masticatory efficiency. Therefore, it is important to control the pain in order to improve the masticatory efficiency in temporomandibular disorder patients. Moreover, managing both pain and sound can improve the quality of life.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.304-312
• /
• 2012

In this study, for behavior clinical signs and blood tests when autumn sudden fevered disease, Tsutsugamushi Disease is Single infected with mixing hemorrhagic fever with renal syndrom.221 positive patients, who have antibody titer more than 1:80 in serologic examination of Tsutsugamushi Disease in a general hospital, Jeollanam-do province, were adopted as a Analysis. in respect of frequency. Single infection patients of Tsutsugamushi Disease were 183 and mixed infection patients with Hemorrhagic Fever with Renal Syndrome were 38. In respect of age, patients over the 70's were mostly infected. In respect of sex, male patients were 70(31.7%) and female patients were 151(66.8%) Women were more infected than men. In respect of outbreak time, the more than 70% disease occurrence of all was charged in October and November and it also occurred in spring. In the clinical signs, fever(p=0.028), urtication(p=0.000) and muscle pain(p=0.000) of mixed infection was more higher than single infection. And in the blood tests, AST(p=0.000), ALT(p=0.000), blood urea nitrogen(p=0.002), total bilirubin(p=0.000) value of mixed infection was more higher than single infection.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.4
• /
• pp.79-85
• /
• 2008

The purpose of this study is to evaluate the mix design of pH reducing cement concrete which can be used for environment-friendly concrete. Cement pastes and concretes are prepared with water-binder ratios and various admixtures such as blast-furnace slag, fly ash and recycled cement, and tested for compressive strength and pH. pH is measured through pore solution expressed from hydrated cement paste by special apparatus. From the test results, regardless of water-binder ratio, The pH of expressed pore solution from hydrated cement paste which is made of ordinary portland cement with blast-furnace slag, fly ash is decreased with increasing of admixtures content, and compressive strength is also slightly improved. The compressive strength of cement paste made of recycled cement which is burnt at $1000^{\circ}C$, for 2 hours is considerably increased compared with that of none-burnt recycled cement due to restoration of hydraulic property, but pH is a little higher. Porous concrete with ordinary portland cement has high pH in the range of 12.22 to 12.59, however, that is reduced to the range of 8.95 to 10.39 by carbonation at the surface of porous concrete. The pH reduction of porous concrete is possible by various admixture addition, however their degrees are very slight. Therefore, to reduce the pH considerably, carbonation method of porous concrete is better in pH reduction methods for plant survival condition of pH of 9.0 or less. In this study, it is apparent that pH for the environment-friendly porous concrete products used in the construction field can be suppressed by this carbonation method and various admixtures addition.