• Korean Chemical Engineering Research
• /
• 제44권2호
• /
• pp.207-215
• /
• 2006

본 연구의 목적은 응집공정에서 생성되는 플럭의 성상을 가시화하여 PACC의 응집 특성을 고찰하였다. 인공 원수내탁질 입자의 제타전위는 pH 8~9에서 영으로 수렴하였고 이 영역에서 TDS와 전기전도도가 최소값을 나타내 주었다. 급속 및 완속 교반의 최적 혼화강도가 관측되었으며, 특히 탁도의 제거에 있어서는 급속교반의 속도경사가 가장 낮은 $95.1sec^{-1}$에서 최대의 제거율을 나타내었다. 급속교반 후에는 $3{\sim}5{\mu}m$의 작은 입자가 급격히 생성되었으며 교반강도가 클수록 더 많은 수의 입자가 생성되었다. 완속교반이 진행될수록 $3{\sim}5{\mu}m$의 작은 입자의 수는 급격히 감소하였고 $7{\sim}21{\mu}m$의 중간 크기의 입자는 증가하는 경향을 나타내주었다. $23{\mu}m$ 보다 큰 입자의 경우는 급속교반의 속도경사가 $95.1sec^{-1}$에서 가장 많은 수가 생성되었고, $3{\sim}5{\mu}m$의 작은 입자의 경우에는 급속교반의 속도경사가 $760.7sec^{-1}$에서 가장 많이 생성되었다.

• 품질경영학회지
• /
• 제16권1호
• /
• pp.15-22
• /
• 1988

This paper analysis the process capability by applying experiment design to control alcohol in soluble matter mixing process of laundry soap. The results are summarized as follows: (1) Alcohol insoluble matter shows the tendency of increasing according to the mixing temperature (A) and beating velocity (B). (2) The most suitable working condition of the mixing process is $A_2B_2$, and 95% confidence limit of alcohol insoluble matter is $22.06{\pm}0.77%$. (3) The process capability index ($C_p$) of the mixing process is improved from 0.64 to 1.68.

• 한국해안·해양공학회논문집
• /
• 제30권5호
• /
• pp.201-206
• /
• 2018

본 연구에서는 석탄회 조립물의 혼합비율에 따른 오염 퇴적물의 간극수 수질 변화를 조사하였다. 석탄회 조립물의 혼합비율을 각각 퇴적물 체적비의 0%, 10%, 30%, 50%로 구성하여 메조코즘 실험을 수행하였다. 하계 및 동계에 퇴적물의 성상 변화를 분석한 결과에 따르면, 혼합 비율이 증가함에 따라 pH가 증가하는 것으로 나타나 석탄회 조립물은 산성화된 퇴적물을 중화시키는데 기여할 수 있을 것으로 판단된다. 인산염 및 암모니아 농도는 혼합비 30%, 50%에서 대조구 대비 유의하게 감소하였다(p < 0.05). 황화수소 농도는 혼합비 10%에서 72% 감소되었으며, 혼합비 30%, 50%에서는 황화수소가 검출되지 않았다. 퇴적물의 산소소비속도를 측정한 결과 혼합비 30%, 50%에서 산소소비속도가 가장 느린 것으로 나타났다. 본 연구를 통해 석탄회 조립물은 사용량에 비례하여 오염 퇴적물의 간극수 수질을 변화시킬 수 있는 재료임을 확인하였다. 그러나 혼합비 30%와 50% 간의 효과가 크게 다르지 않은 것으로 나타나 경제적인 측면을 고려했을 때 퇴적물 체적의 30%만큼 혼합하는 것이 적합한 것으로 결론지을 수 있다.

• 호남수학학술지
• /
• 제30권3호
• /
• pp.479-486
• /
• 2008

Let {${\Omega}$, F, P} be a probability space and {$X_n{\mid}n{\geq}1$} be a sequence of random variables defined on it. We study the Hajeck-Renyi-type inequality for p..mixing random variable sequences and obtain the strong law of large numbers by using this inequality. We also consider the strong law of large numbers for weighted sums of ${\tilde{\rho}}$-mixing sequences.

• 유기물자원화
• /
• 제22권2호
• /
• pp.50-56
• /
• 2014

일반적으로 도금 폐수를 비롯한 산업 폐수 내 중금속 처리에 적용되는 응집-침전은 응집제의 비용과 침전 효율의 불안정성이라는 한계가 존재한다. 본 연구에서는 수산화물 생성-분리막 공정을 전제로 하여, pH와 교반조건에 따른 수용액 상의 중금속 제거 효율과 생성된 수산화물의 입도 분포를 고찰하였다. pH별 실험 결과, pH 9-10에서 최적의 중금속 제거 효율이 확인되었으며, 무기응집제인 $FeCl_3$의 투입은 오히려 제거 효율을 저하시켰다. 완속교반 시간 및 강도는 70 rpm, 20 min 조건이 최대 효율을 보였으며 Cu, Ni, Zn 모두 청정 지역 기준 폐수 배출 기준을 만족하였다. 나타났다. 생성된 중금속 수산화물의 입도 분석을 수행한 결과, 입자의 99.9 %가 $2{\mu}m$ 이상이었다.

• 대한기계학회논문집A
• /
• 제28권1호
• /
• pp.63-69
• /
• 2004

It is of great interest to enhance mixing performance in a microchannel in which the flow is usually characterized as a low Reynolds number (Re) so that good mixing is quite difficult to be achieved in this laminar flow regime. In this regard, we present a new chaotic passive micromixer, named Barrier Embedded Micromixer (BEM), of which the mixing mechanism is based on chaotic flows. In BEM, chaotic flow is induced by periodic perturbation of the velocity field due to periodically inserted barriers along the channel wall while a helical type of flow is obtained by slanted grooves on the bottom surface of the channel in the pressure driven flow. To experimentally compare the mixing performance, a T-microchannel and a microchannel with only slanted grooves were also fabricated. All microchannels were made of PDMS (Polydimethylsiloxane) from SU-8 masters that were fabricated by conventional photolithography. Mixing performance was experimentally characterized with respect to an average mixing intensity by means of color change of phenolphthalein as pH indicator. It was found that mixing efficiency decreases as Re increases for all three micromixers. Experimental results obviously indicate that BEM has better mixing performance than the other two. Chaotic mixing mechanism, suggested in this study, can be easily applied to integrated microfluidic systems , such as Micro-Total-Analysis-System, Lab-on-a-chip and so on.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제7권4호
• /
• pp.24-30
• /
• 2002

본 연구에서는 카올리나이트에 대한 납의 흡착 특성을 규명코자 실내에서 회분식 흡착시험을 수행하였다. 회분식 흡착시험에서는 흡착평형도달시간, 흡착능 및 흡착등온식을 연구하였고 pH와 혼합비에 따른 카올리나이트에 대한 납의 흡착특성에 미치는 영향을 분석하였다. 실험결과 카올리나이트에 대한 납의 흡착은 24시간 이내에 평형에 도달하였고 초기오염농도가 증가함에 따라 카올리나이트에 대한 납의 흡착량은 증가하나 초기농도 198mg/l 이상에서는 흡착율은 감소하였다 Freundlich 흡착등온식에 적용한 결과 흡착강도를 나타내는 계수 1/n은 0.9584이다. 그리고 pH 값이 증가함에 따라 초기오염농도에 관계없이 카올리나이트에 대한 납의 흡착량 및 흡착율은 증가되었으며 pH 8 이상에서는 일정한 값에 수렴하였다. 또한 혼합비가 증가함에 따라 흡착량은 증가하였다. 반면에 흡착율은 점점 증가하다가 일정 혼합비 8 이상에서는 감소하는 경향이 있음을 알 수 있었다.

• 환경위생공학
• /
• 제15권4호
• /
• pp.91-97
• /
• 2000

The objective of this study was to evaluate the possiblity of Foodwaste and co-treatment with other waste for vermistabilization. The value of oxidation-reduction potential(Eh) of the dewaterized foodwaste by a plant of subatmospheric evaporation was a possitive(+) value indicating, but the values of pH, salinity was idicating an unfavorable condition for earthworm life. The paper mill mixing waste properties by ripening for 20days were changed into the favorable range for earthworm. The growth of earthworms in foodwaste and mixing waste of paper mill 30% was found to be 68%, 84% for the survival rate, 227%, 275% for the liveweight increasing rate, respectively. The ingestion rate of foodwaste and mixing waste of paper mill 30% indicate 0.72g/g·d, 0.81g/g·d, respectively. About 62∼75% of ingestion amount produce cast and characteristics of cast indicate pH 6.1∼6.5 organic component 34∼42%, salinity 0.35∼0.4, CEC 73∼94 me/100g, N, P, K concentration 0.8∼1.2%, 0.4∼1.6%, 0.43∼0.5% respectively. Therefore it can be evaluated that the casts are good soil condition and organic fertilizer.

• 동력기계공학회지
• /
• 제19권1호
• /
• pp.56-63
• /
• 2015

In this study, the exhaust characteristics of the diesel engine for the change of the mixing ratio of biodiesel fuel were quantitatively analyzed by using the numerical analysis method. As the fuel used in the experiment, the diesel and biodiesel(waste oil, soybean oil), the mixed fuel BD2(Diesel only), BD3, BD5, BD20, BD50 and BD100 were used. The injection pressure($p_{inj}$) was set to 400bar, 600bar, 800bar, 1000bar and 1200bar as the experimental variable. Also the concept of the standard deviation, Pearson's correlation coefficient and Spearman rank-order correlation coefficient based on the statistics was introduced in order to analyze the exhaust characteristics of the quantitative NOx and Soot according to the injection pressure and the mixing ratio variation of biodiesel blending fuel. It is considered that as a result of studies, for the waste oil, NOx and Soot can be simultaneously reduced through control of the mixing ratio at the regions of $p_{inj}=400bar$ and $p_{inj}=600bar$, and the Soot can be reduced without affecting on the emission of NOx at more than $p_{inj}=800bar$. For the soybean oil, NOx and Soot can be simultaneously reduced at $p_{inj}=400bar$ and the Soot can be reduced without affecting on the emission of NOx at $p_{inj}=600bar$.

• 한국환경보건학회지
• /
• 제19권2호
• /
• pp.1-9
• /
• 1993

In public water supply systems, Alum and/or PAC being used as a coagulant. It is well known that their use increased frequently the concentration of residual aluminum in filtered water upon operating conditions. This study was conducted to find the optimum conditions that both the concentration of residual aluminum and turbidity are minimized by changing such factors as pH, temperature, alum dosage, mixing rate, alkalinity and hardness. The results can be summarized as follows: The pH values for the minimum concentration of residual aluminum and turbidity as a given experimental condition were found at pH 6 and pH 7 respectively, the apparent clarity was best at pH 8. The floc settling rate was the greatest at pH 6.5, but the turbidity was high at the same condition. The more alum dosage, the higher the concentration of residual aluminum. However the alum dosage less than 15 mg/l tend to decrease in turbidity. Restabilization and enmeshment occurred near 15 mg/l and 20 mg/l of alum dose respectively. With the increase of mixing rate (rapid and slow), the concentration of residual aluminum and turbidity are increased and the same trend was found in increment of mixing time. At low water temperature, the concentration of residual aluminum was decreased, but turbidity was increased. It was confirmed that alkalinity had an effect on the coagulation efficiency, but hardness did not.