• Asian-Australasian Journal of Animal Sciences
• /
• 제14권7호
• /
• pp.947-950
• /
• 2001

To improve the low content of crude protein and low quality fermentation of napiergrass silage, ensiling with phasey bean was examined. Napiergrasses, (Pennisetum purpureum cv. Merkeron), hybrid napiergrass (Pennisetum purpureum${\times}$ Pennisetum typhoides) and phasey bean (Macroptilium lathyroides cv. Murray) were cultivated in Fukuoka, Japan. The first growth of napiergrasses and phasey bean were harvested at 90 days of age and chopped into about 1 cm lengths. The mixing levels of phasey bean with napiergrasses were 0, 25, 50 and 75; 700 g of plant materials were ensiled into a laboratory silo (1.0 litre. polyethylene container) and incubated for 30 days. After opening silos, pH, total nitrogen (TN), volatile basic nitrogen (VBN) and organic acids (lactic acid: LA, acetic acid: AA, butyric acid: BA) were determined. The experiment was a factorial design of $2{\times}4$ with 3 replicates. The data were analyzed statistically by two-way analysis of variance. Without inclusion of phasey bean, lower quality was observed for hybrid silage than for Merkeron silage. The inclusion of phasey bean at the rate of 25% increased DM and TN, and decreased pH value, VBN/TN, AA and BA in both Merkeron and hybrid napiergrass silages. The value of pH, TN, VBN/TN, AA and BA were not significantly different among 25, 50 and 75% mixing levels of phasey bean. LA production increased significantly with the increase in phasey bean mixing level in both hybrid and Merkeron silages. At all mixing levels of phasey bean, LA production did not show significant differences between Merkeron and hybrid silages.

• 대한기계학회논문집A
• /
• 제36권5호
• /
• pp.545-553
• /
• 2012

본 논문은 옵셋인쇄용 잉크를 자동적으로 교반할 수 있는 시스템의 개발과정을 소개하고 있다. 교반 공정은 페인트, 잉크 등 색을 다루는 많은 산업 분야에서 필요하고, 특히 소량의 고점성 잉크를 섞어서 별색을 제조하기 위한 자동화된 시스템은 해당 산업체에서 크게 필요로 하고 있다. 본 연구에선 공전과 자전에 의한 회전과 벨트 전동 방식으로 잉크를 교반할 수 있는 시스템의 설계, 제작, 실험이 수행 되었다. 회전 방향, 속도, 교반용기의 각도 및 잉크 양 등 다양한 조건에서 실험을 수행함으로써 교반시스템의 성능을 검증하였다. 또한 실험을 통해 잉크 교반에 적합한 조건을 찾음으로써 옵셋 인쇄업체에서 별색 제조용으로 사용이 가능한 방법을 제시하였다.

• 한국식품조리과학회지
• /
• 제11권2호
• /
• pp.113-118
• /
• 1995

A preferable mixing ratio of a six-vegetable juice was suggested in this study. The vegetables used for preparation of mixed vegetable juice were carrot(Ct), cabbage(Cg), pear(Pr), cucumber(Cr), celery (Cy) and dongchimi(Di). The characteristics of pH, titratible acidity, reducing sugar, turbidity, solids, color and acceptability were compared to determine the mixing ratio. The vegetables showed a wide ranHe of pH of 3.70-6.01, acidity of 28.92 uv~74.40 nd and reducing sugar of 1.20ft~ 12.69fo. Celery juice showed the higest suspension stability and "b" value and the lowest values in Hunter "L" and "a" values among the 6 vegetable juice. The preferable mixing ratio of two-vegetable juice selected were Ct-Di(1 : 4), Cg-Pr(1 : 3) and Cr-Cy(3 : 1). From the various ratio of the three of biary mixtures of Cg-Pr(1 : 3): Ct-Di(1 : 4): Cr-Sy(3 : 1), two ratio of 5.0 : 2.5 2.5(V-6A) and 6.0 : 2.0 : 2.0(V-6B) were suggested as the most prefered six-vegetable juice. Pear, dongchimi and cucumber were found to be influential on the preference. The pH and titratible acidity of the two juices with different ratios were in the range of 4.92~4.98 and 36.g∼37.4 ml, respectively.

• 대한치과보철학회지
• /
• 제39권5호
• /
• pp.492-501
• /
• 2001

The use of alginate impression materials today is prevalent because of its efficiency and simplicity in clinical settings. Unfortunately, the simplicity of the procedure tends to lull the dentist into a sense of well-being, and lead him into using careless or sloppy technique. Alginate impression materials are used to fabricate diagnostic and preliminary casts, and the final cast. Incorrect use of this material is known to affect the accuracy of the final prosthesis. The purpose of this study was to compare the effect of different mixing methods of alginate impression material and tray adhesive on the accuracy of the stone cast produced by each method. A total of 30 stone casts were produced by using 3 different types of mixing methods (10 stone cast for each mixing method, respectively). The first method utilized an automatic-mixing machine to mix alginate while the second method was carried out manually, strictly following manufacturer's instructions. The third method also involved manual mixing, but did not follow the manufacturer's instructions and was done in a random fashion. Also, 20 additional stone casts were produced by using alginate with or without tray adhesives were included in the study to evaluate effects of tray adhesives on the accuracy of alginate impression. 10 stone casts were produced by adding tray adhesives to the interior surface of the impression tray prior to taking the impression. The other 10 excluded this step. A total of 50 stone casts were analyzed by the three-dimensional measuring machine to measure and compare the dimensional changes of the impression material of each group. The results are as follows. 1. No significant difference was found between the automatic mixing group and the manually-mixing group(p>0.05). 2. For the group that followed manufacturer's instructions, less dimensional changes were record ed than the group that didn't in measuring distanced 4(p<0.05). 3. The group that used tray adhesives showed less dimensional changes(p<0.05). The findings revealed that mechanical methods of mixing alginate impression materials had little influence on dimensional changes. However, it is proven that following manufacturers instructions in alginate impression taking is an important step in acquiring accurate impressions and tray adhesives may play an important role in enhancing the results.

• 상하수도학회지
• /
• 제20권4호
• /
• pp.559-571
• /
• 2006

The overall objective of this research was to find out the interrelation of coagulant and organic matter during rapid mixing process and to identify the change of organic matter by mixing condition and to evaluate the effect of coagulation pH. During the coagulation, substantial changes in dissolved organics must be occurred by coagulation due to the simultaneous formation of microflocs and NOM precipitates. Increase in the organic removal efficiency should be mainly caused by the removal of microflocs formed during coagulant injection. That is, during the mixing period, substantial amount of dissolved organics were transformed into microflocs due to the simultaneous formation of microflocs and NOM precipitates. The results also showed that 40 to 80% of dissolved organic matter was converted into particulate material after rapid mixing process of coagulation. During the rapid mixing period, for purewater, formation of dissolved Al(III) (monomer and polymer) constant by rapid mixing condition, but for raw water, the species of Al hydrolysis showed different result. During the rapid mixing period, for high coagulant dose, Al-ferron reaction increases rapidly. At A/D(Adsorption and Destabilization) and sweep condition, both $Al(OH)_3(s)$ and dissolved Al(III) (monomer and polymer) exist, concurrent reactions by both mechanism appear to cause simultaneous precipitation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3139-3143
• /
• 2007

The objective of this paper was to investigate the mixing characteristics of an three-stage inline coagulant mixing system experimentally. Wastewater samples of pH 8.5 and initial turbidity 1,000NTU were taken from a site of tunneling work. At the constant dosage, 0.36mL/L, of polymer as coagulant aids, the coagulation efficiency with the dosage of PAC as coagulant was about 4${\sim}$6% at 10 minutes after sampling. In the case of 2 different velocity gradient conditions, the efficiency of turbidity removal was increased about 6.5${\sim}$8% with increasing the dosage of coagulant while, the efficiency was increased about 20${\sim}$21.5% with increasing the dosage of coagulant aids. The efficiency of turbidity removal with the settling time after sampling was about 90% after 1 minute, and the efficiency was about 95% after 5 minutes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.262-268
• /
• 1998

This research is to examine the selected method of optimal mixing proportion and cost analysis in the super flowing concrete. As confined water $ratio($\beta_p$)$ and K is introduced, itis to establish optimal mixing design of super flowing concrete according to the steps of paste, mortar and concrete. From paste and mortar test, it was led to $$\beta_p$$ and $K_p$satisfying the optimum condions depending on the kinds of binders. Then $$\beta_p$$ and $K_p$ is reflected to the mix condition of super flowing concrete. The result of test, the mix condition of super flowing concrete satisfied the quality performance of concrete with adjustment of additional rate of the superplasticizer. Besides, in case of design strength $350kg/\textrm{cm}^2$ of concrete, material cost in super flowing concrete is able to be reduced 5~16% in replacement of fly ash 30% in ordinary portland cement and slag cement.

• 한국환경과학회지
• /
• 제19권9호
• /
• pp.1137-1142
• /
• 2010

This study proposes a guideline of a green roof system suitable for the local environment by verifying the growth of Zoysia japonica in a shallow, extensive, green roof system under rainfed condition. The experimental soil substrates into which excellent drought tolerance and creeping Z. japonica was planted were made with different soil thicknesses(15cm, 25cm) and soil mixing ratios(SL, $P_7P_1L_2$, $P_6P_2L_2$, $P_5P_3L_2$, $P_4P_4L_2$). The plant height, green coverage ratio, fresh weight, dry weight and chlorophyll contents of Z. japonica were investigated. For the soil thickness of 15cm, the plant height of Z. japonica was significantly as affected by the soil mixing ratio and it was shown in the order SL= $P_4P_4L_2$ < $P_7P_1L_2$ = $P_5P_3L_2$ < $P_6P_2L_2$. For the soil thickness of 25cm, the plant height was increased in order to SL < $P_7P_1L_2$, $P_6P_2L_2$, $P_5P_3L_2$ < $P_4P_4L_2$. The green coverage ratio was not observed by soil the mixing ratio or soil thickness. However, the green coverage ratio was 86~90% with a good coverage rate overall. The chlorophyll contents of Z. japonica were not significantly affected by the soil mixing ratio in the soil thickness of 15cm, but were higher in the natural soil than in the artificial soil at 25cm soil thickness. The fresh weight and dry weight of Zoysia japonica were heavier in the 25cm thickness than in the 15cm thickness and in the artificial soil mixture than in the natural soil. The result indicated that the growth of Zoysia japonica was more effective in the 25cm soil thickness with artificial soil than in the 15cm soil thickness with natural soil in the green roof system under rainfed condition.

• 한국가금학회지
• /
• 제47권1호
• /
• pp.29-37
• /
• 2020

본 연구는 한국토종닭 종계에 있어 암수 합사가 개체들의 스트레스 반응 정도에 미치는 영향을 살펴보고자 한 것으로 스트레스 반응 정도는 합사 이전과 합사 이후 개체들의 H/L ratio, HSPs 유전자 발현량 및 세포 내 DNA 손상율을 분석하였다. 분석 결과, 합사에 따른 개체들의 H/L ratio 값이 합사 이전에 비해 3배 이상 유의하게 증가한 것으로 나타났으며 암수 간 차이는 없는 것으로 나타났다(P<0.001). HSP-70, HSP90-α 및 HSP90-β 유전자 발현율에 있어 모든 HSPs의 유전자 발현율이 암수 합사 이전에 비해 합사 이후 2.5~3.4배 정도 유의하게 상승한 것으로 나타났으며, 특히 암컷이 수컷에 비해 합사에 따른 HSPs 발현율 증가가 높은 것으로 나타났다(P<0.01). 세포 내 DNA 손상율 분석에 있어 모든 Comet 지표들이 암수 합사 이전에 비해 합사 이후에 유의하게 증가하였으며, 암수 간에는 차이가 없는 것으로 나타났다(P<0.001). 이상의 결과들을 종합할 때, 토종 종계에 있어 암수 합사가 암컷과 수컷 모두에게 매우 큰 외적 스트레스 요인으로 작용함을 시사한다고 하겠다.

• 전기학회논문지P
• /
• 제51권3호
• /
• pp.132-136
• /
• 2002

In this study, we analyzed the luminous efficiencies of Ne-Xe-Ar and He-Ne-Xe-Ar mixing gas in compared with those of Ne-Xe and He-Ne-Xe mixing gas to improve luminous efficiency by adding a small amount of Ar gas. At the Xe 4%, the brightness of Ne-Xe and He-Ne-Xe mixing gas is higher than others. As the Xe % increases, power consumption decreases. Thus, in the Ne-Xe and He-Ne-Xe mixing gas of Xe 4%, we obtained maxium luminous efficiency. The Ar concentration is varied from 0.1% to 0.7% in this study. The luminous efficiency of the Ne-Xe(4%) mixing gas is improved to 1.16 and 1.13 lm/W by adding an Ar concentration of 0.4% and 0.5%, respectively. The luminous efficiency of the He-Ne-Xe(4%) (He : Ne = 7 : 3) mixing gas is considerably improved by adding an Ar concentration of above 0.3%. The maximum luminous efficiency of this mixing gas is 1.38 lm/W at the condition of adding an Ar concentration of 0.5%.