• Resources Recycling
• /
• v.21 no.3
• /
• pp.39-47
• /
• 2012

This study was conducted to optimize a mixing design of lightweight aerated concrete with the blast furnace slag(BFS) using Box-Behnken method, one of response surface designs. The lightweight aerated concrete with the BFS was made on the conditions of steam curing method at atmospheric pressure. The experimental factors were unit Water(W)/total powder($P_d$) ratio, BFS replacement percentage and Al powder addition based on the total powder (${P_d}^*$%). From the results of the response surface analysis, regression models for dried specific gravity and compressive strength of the lightweight aerated concrete were derived. When the target values for dried specific gravity and compressive strength of the lightweight aerated concrete were set at 0.72 and 4.42 MPa respectively, its optimized mixing conditions driven from the regression models were 0.62 of $W/P_d$ ratio, 35.5% of BFS replacement and 0.05% of Al powder addition. This experimental design model was found to be credible by measuring the dried specific gravity and compressive strength of the sample made from the above mixing conditions.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.63-75
• /
• 1999

This study was performed to investigate applicabilities of sewage sludge and papermill sludge as carbon sources in biologically treating abandoned acidic mine drainage, and effects of limestone. In spite of ranging average 3.3 in influent pH, SRB(Sulfate Reducing Bacteria) was well grown. because effluent pH was maintained by alkalinity a little under for whole stages. TCODcr was high in effluent with washing out in early stage. but its concentration was low with passed time and did not cause the problem of secondary pollution. Removal rate of Mn was remarkably low, but in case of heavy metals such as Fe, the fixation trends showed high as the volume of ${SO_4}^2$ reduction increased. In case of mixing sewage sludge and papermill sludge, when their mixing ratio were 1 : 1 and 2 : 1 respectively, rate of ${SO_4}^2$ reduction and removal rate of heavy metals were high. The mixing ratio 1 : 1 was considered as the most appropriate, because degradability of swewage sludge under short time was higher than that of papermill sludge. As a result of investigating efficiencies of limestone and biological treatment, biological treatment excelled limestone in neutralization and removal rate of heavy metals.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.3
• /
• pp.404-409
• /
• 2012

In order to obtain optimum mixing conditions with animal cadaver residue and sawdust for composting using rendering treatment method for agricultural recycling, changes of chemical characteristics and compost quality after composting were investigated. Initial mixing ratios with animal cadaver residue and sawdust were adjusted 100 : 0, 50 : 50 and 30 : 70. Temperature, pH, contents of ammonia and carbon dioxide were rapidly increased in 3 days and then decreased with time. Organic matter content was similar in all conditions. In mixing ratio of 50 : 50, the compost quality was satisfied with compost depending on official standard for product fertilizer. Thus, the optimum mixing ratio of animal cadaver residue and sawdust were 50 : 50.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.6
• /
• pp.527-534
• /
• 2017

Accordingly, this study, in order to use powder of recycled aggregate from production of recycled aggregate as an activator of ground granulated blast furnace slag, the influence of added recycled aggregate powder on physical properties of concrete induced ground granulated blast furnace slag were analyzed by hydration stages. The results of the study are summarized as follows: Except for samples eluted powder of recycled aggregate 1%, all the samples were high alkali suspensions with higher than pH 12.0. In particular, when eluted time was 5 hours, the sample eluted powder of recycled aggregate 3% showed about 15 mg/l of calcium hydroxide that was not different from the amount of calcium hydroxide in the mixing water eluted powder of recycled aggregate 5%. Hence, from this results, it can be considered that optimal eluted powder of recycled aggregate was 3% in this study. When using mixing water eluted with powder of recycled aggregate, compared to use of ordinary mixing water, it showed greater compressive strength in the entire ages, and in the sample replaced with ground granulated blast furnace slag by 50%, its compressive strength was greater than that of the OPC. As use of mixing water eluted with powder of recycled aggregate in concrete used with large amount of ground granulated blast furnace slag was more effective for improving compressive strength than ordinary mixing water, it is verified that powder of recycled aggregate had an effect of activator.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.27 no.2
• /
• pp.57-71
• /
• 1985

The characteristics of compaction and unconfined compressive strength were investigated by mixing with lime to all soils adjusted by given percentages of two kinds of clays to sand to obtain the most effective distribution of grain size and the optimum lime content for soil stabilization. In addition, unconfined compressive strength and durability tested by adding of sodium metasilicate, sodium sulfate, sodium carbonate, sodium gydroxide and magnesium oxide to lime-soil mixture mixed with 8 percent lime to adjusted soil having the mixing percentage of 60 percent of cohesive black clay and 40 percent of sand by weight to get the effect and the optimum content of chemicals. The results obtained were as follows; 1.With the addition of more lime, the optimum moisture content was increased, and the maximum dry density was decreased, whereas the more the amount of clay and the less was the maximum drt density. 2. In the soil having more fine grain size the unconfined compressive strength was larger in the earlier stage of curing period, in accordance with the longer period, the mixing percentages of sand to clay showing the maximum unconfined compressive strength, on the basis of 28-day strength, were 60% : 40% (black clay) and 40% : 60% (brown clay) respectively. 3. The reason why the soil adjusted with black clay was remarkably bigger in the unconfined compressive strength than ones adjusted with brown clay for all specimen of lime-soil mixture was the difference in the kind of clay, the amount of chemical compositions the value of pH. Black clay was mainly composed of halloysite that reacted with lime satisfactorily, whereas the main composition of brown clay was kaolinite that was less effect in the enhance of unconfined compressive strength. Also the difference of unconfined compressive strength was because black clay was larger in the amount of composition of calcium oxide and magnesium oxide in the value of pH affecting directly on the unconfined compressive strength of lime-soil mixture than brown clay. 4. In the lime-soil mixture mixed with 8 percent of lime to soil that mixing percentage of sand to black clay was 60% : 40%, on the standard of 7-day strength, the effect of chemical was arranged in the order of magnesium oxide, sodium carbonate, sodium sulfate, sodium hydroxide and sodium metasilicate. 5. The optimum amount of chemical being applicable to the maximum unconfined compressive strength of lime-chemical-soil mixture was 1 percent by weight for air dry soil in the case of adding sodium carbonated and 0.75 percent on sodium hydroxide, the unconfined compressive strength was increased continuously with increase of the amount of chemical up to 2 percent of chemical content is the lime-chemical-soil mixture added sodium metasilicate, sodium sulfate and magnesium oxide. 6. It was considered that the chemical played and accelerant role of early revelation of strength because the rate of increase of unconfined compressive strength of all of lime-chemical-soil mixtures was largest on the 7-day cured specimen. 7. The effect of test on freezing and thawing after adding suitable amount of chemical on the lime-soil mixture mixed with 8 percent of lime to soil that mixing percentage of sand to black clay was 60% : 40% was arranged in the order of magnesium oxide, sodium carbonate, sodium sulfate, sodium metasilicate and sodium hydroxide.

• Korean journal of food and cookery science
• /
• v.12 no.2
• /
• pp.146-152
• /
• 1996

Determining the optimal mixing ratio of pumpkin, water, glutinous rice powder, red bean, kidney bean in preparing Hobakjook has been attempted and on the basis of it, Hobakjook with glutinous rice powder was set to be A group, and the one that glutinous rice powder was replaced by brown glutinous rice powder for the purpose of enhancing preference and nutrition was set to be B group. A group and B group with additional 0％, 5％, 10％, 15% perilla powder of pumpkin weight was labeled as Al-A4 and Bl-B4 respectively, and then analyzed nutritionally. Optimal material mixing ratio and preference was investigated by use of sensory evluation and instrumental test. As a result, the optimal material mixing ratio was determined as pumpkin 400 g, water 60 cc, glutinous rice powder 40 g, red bean 30 g, kidney bean 30 g, salt 4 g, sugar 10 g. In sensory evaluation significant difference (P < 0.05) was shown among the samples in color., flavor.1, falvor. II and overall quality. And A3 in viscosity, A2 in color, A4 in sweetness, B2 in flavor 1, Al and B2 in flavor 11, and B2 in overall quality was preferred most. Instrumental measurement shows that B4 in viscosity and A4 in sweentness was highestly recorded and showed significant difference (p<0.05). As the addition of perilla powder increased, the viscosity and sweetness was increased. In color measurement A4 in L value, A3 in a value, and Bl in b value was highestly recorded. And as perilla powder was added, L value and a value was increased while b value was decreased. Color in sensory evaluation was significantly correlated to b value in instrumental measurement. In summary, Hobakjook with brown glutinous rice was superior to the one with glutinous rice in preference and proximate composition, and as the addition of perilla powder was increased, proximate composition was increased but preference was rather decreased, and Hobakiook with 5％ addition of perilla powder to brown glutinous rice powder was preferred most.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.4
• /
• pp.53-61
• /
• 2018

Anaerobic digestion (AD) is one of the most widely used process that can convert the organic fraction of waste activated sludge (WAS) into biogas. However, most researched actual methane yields of anaerobic digester (AD) on lab scale is lower than theoretical ones. Bioelectrochemical, anaerobic digester was used to increase methane yield from waste activated sludge. The influence of anaerobic digestion sludge and raw sludge mixing ratio (3:7, 5:5) on methane yield and organic matter removal efficiency were explored. As a result, when the mixing ratio of bioelectrochemical anaerobic sludge was 5:5 compared with 3:7, the highest methane yields were 294.2 mL $CH_4/L$ (0.63 times increase) and 52.5% (7.5% increase), the bioelectrochemical anaerobic digester(5:5) was more stable in the pH, t otal alkalinity and VFAs, respectively. These results showed that the increase in the mixing ratio of anaerobic digestion sludge was found to be effective for maintaining the stable performance of bioelectrochemical anaerobic digester.

• Korean Journal of Food Science and Technology
• /
• v.36 no.4
• /
• pp.616-623
• /
• 2004

Fermentation characteristics of rice-grape wine with different mixing ratios of rice and grape, rice one vs. grape five (Exp.1), rice two vs. grape five (Exp.2), rice five vs. grape five (Exp.3), and rice five and grape two (Exp.4), were investigated. Final alcohol contents of Exp.4, Exp.3, Exp.2, and Exp.1 were 18.4, 16.0, 14.9, and 12.9%, respectively. Final alcohol content increased with increasing amount of rice. Acidity of four experiments ranged pH 3.4-3.92, and total acidity was 0.52-0.74%. Exp.4, Exp.3, Exp.2, and Exp.1 gave a values of 8.76, 12.77, 12.88, and 23.96, respectively. When different mixing methods were applied to Exp.1, the resulting final alcohol contents of Exp.6 (grape musts periodically added after rice fermentation), Exp.7 (rice and grape simultaneously added and fermented), and Exp.8 (rice added after grape must fermentation) were 2.3-3.2% Bower than that of Exp.1 (grape must added after rice fermentation), and total acidity was 0.72-0.74%. Sensory evaluation comparing conventional red wine and rice-grape wine of Exp.1 showed rice-grape wine was preferred in taste.

• Journal of Bio-Environment Control
• /
• v.12 no.4
• /
• pp.184-189
• /
• 2003

This research was conducted to determine the effect of mixing ratio of aquafarm waste water sludge (AWWS) in the growing medium as a source of fertilizers on growth of plug seedlings of pepper (Capsicum annuum L.) and tomato (Lycopersicum esculentum Mill.). Increased mixing ratio of AWWS resulted in increased fresh and dry weights, leaf area, plant height, and total chlorophyll content, although there were slight differences in growth characteristics at 20 and 40 days after sowing. Concentration of AWWS affected insignificantly the percent dry matter, number of leaves, and length of the longest root. The addition of AWWS increased pH and decreased EC in the medium as compared to that of chemical fertilizer. Compared to the control of a liquid fertilizer, 4 or 8 kg AWWS${\cdot}45L^{-1}$ medium (Sludge 4) gave a similar or slightly better growth. Above results suggested that addition of about 4 kg AWWS${\cdot}45L^{-1}$medium is sufficient for seedling growth and the AWWS can be used as a substitute for the liquid fertilizer in plug seedling production.

• Proceedings of the Korean Fiber Society Conference
• /
• 1987.06b
• /
• pp.12-12
• /
• 1987

To improve the fibrillation phenomenon and processibili to of poly(p-phenyleneterephthalamide) (PPD-T) , a P/E copolyamide was prepared by introducing 4,4'-ethylene dianiline (EDA) into rigid chain backbone. The effects of semi-flexible segment on the liquid crystalline properties were investigated. The EDA, used as a comonomer, was prepared by catalylitic reduction of p,p'-dinitrophenyl , obtained by oxidative coupling of p,p'-dinitrotoluene. Various high molecular weight PIE copolyamides were prepared by low temperature solution polycondensation of terephthaloyl chloride (TPC) with various mixtures of p-phenylene diamine (PPD) and EOA. The PfE copolyamides were completely dissolved in 100% svlfuric acid, and the phase transition of P/E copolyamide-sulfuric acid systems was examined in teams of concentration and temperature. Over the chemical compositions, PIE=911, 812, and 713, solutions of anisotropic single phase were acquired. In particular, the two mixing ratios, 911 and 812, gave a good anisotropic spinning dope.