• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.180-190
• /
• 2007

The purpose of this study was to evaluate the abrasion resistance of surface penetrating sealant which was applied on a composite resin restoration and to provide proper time to reapply sealant on composite resin surface. Two hundred rectangular specimens, sized $8\times3\times2mm$, were made of Micronew (Bisco, Inc., Schaumburg, IL, U.S.A) and divided into two groups; F group (n = 10) was finished with coarse and medium grit of Sof-Lex discs and BisCoverwas applied B group (n = 190) after finishing with discs. B group was again subdivided into nineteen subgroups From B-1 group to B-18 group were subjected to toothbrush abrasion test using a distilled water-dentifrice slurry and toothbrush heads B-IM group was not subjected to toothbrush abrasion test. Average surface roughness (Ra) of each group was calculated using a surface roughness tester (Surfcorder MSE-1700: Kosaka Laboratory Ltd., Tokyo, Japan) . A representative specimen of each group was examined by FE-SEM (S-4700: Hitachi High Technologies Co., Tokyo, Japan). The data were analysed using cluster analysis, paired t-test, and repeated measure ANOVA. The results of this study were as follows; 1. Ra off group was $0.898{\pm}0.145{\mu}m$ and B-IM group was $0.289{\pm}0.142{\mu}m$. Ra became higher from B-1 group $(0.299{\pm}0.48{\mu}m$ to B-18 group $(0.642{\pm}0.313{\mu}m$. 2. Final cluster center of Ra was $0.361{\mu}m$ in cluster 1 $(B-IM\simB-7)$, $0.511{\mu}m$ in cluster 2 $(B-8\simB-14)$ and $0.624{\mu}m$ in cluster 3 ($(B-15\simB-18)$. There were significant difference among Ra of three clusters. 3 Ra of B-IM group was decreased 210.72% than Ra of F group. Ra of B-8 group and B-15 group was increased 35.49% and 51.35% respectively than Ra of B-IM group. 4. On FE-SEM, B-IM group showed the smoothest resin surface. B-8 group and B-15 group showed vertically shallow scratches , and wide and irregular vertical scratches on composite resin surface respectively. Within a limitation of this study, finished resin surface will be again smooth and glazy if BisCover would be reapplied within 8 to 14 months after applying to resin surface.

• Journal of Broadcast Engineering
• /
• v.13 no.2
• /
• pp.200-213
• /
• 2008

H.264| MPEG-4 AVC is a new video codingstandard defined by JVT (Joint Video Team) which consists of ITU-T and ISO/IEC. Many techniques are adopted fur the compression efficiency: Especially, an intra prediction in an inter frame is one example but it leads to excessive amount of encoding time due to the decision of a candidate mode and a RDcost calculation. For this reason, a fast determination of the best intra prediction mode is the main issue for saving the encoding time. In this paper, by using the result of statistical relation between intra $16{\times}16$ and $4{\times}4$ intra predictions, the number of candidate modes for $4{\times}4$ intra prediction is reduced. Firstly, utilizing motion vector obtained after inter prediction, prediction of a block mode for each macroblock is made. If an intra prediction is needed, the correlation table between $16{\times}16$ and $4{\times}4$ intra predicted modes is created using the probability during each I frame-coding process. Secondly, using this result, the candidate modes for a $4{\times}4$ intra prediction that reaches a predefined specific probability value are only considered in the same GOP For the experiments, JM11.0, the reference software of H.264|MPEG-4 AVC is used and the experimental results show that the encoding time could be reduced by 51.24% in maximum with negligible amounts of PSNR drop and bitrate increase.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.348-351
• /
• 2003

산소 과전압이 낮은 $MnO_2$를 촉매로 사용하여 반도체 산화물계의 산소선택성 전극을 제조하고 산화물 coating층의 미세구조와 전기화학적 특성을 분석하였다. Ti 기판에 열분해 법을 이용하여 $MnO_2$ 피막을 형성하였고, 또한 PVDF : $MnO_2$의 함량비를 1 : 1에서 1 : 40까지 정량적으로 변화시키고 DMF의 함량을 각각의 고정된 PVDF : $MnO_2$의 함량비에서 변화시켜 Pb전극에 1.5 mm/sec의 속도로 5회 dipping하여 $MnO_2$ 피막층을 형성 하였다. $450^{\circ}C$에서 1시간 열분해하여 약 $1\;{\mu}m$의 $MnO_2$ 피막층이 형성되었으나 Ti 기판과의 접착력이 약하여 피막자체에 대한 전기화학적 특성을 관찰할 수 없었다. PVDF : DMF = 4 : 96인 경우 pb 전극의 피막층이 얇기 때문에 박리현상이 일어났으며 이는 산화물 용제의 낮은 점도 때문인 것으로 판단된다. 또한 PVDF : DMF = 10 : 90의 경우는 5회 dipping 하여 약 $150\;{\mu}m$의 피막층을 형성하였다. PVDF : $MnO_2$의 함량비가 1:1에서 1:6 까지는 DMF의 함량에 무관하게 전극 특성이 나타나지 않았지만 $MnO_2$의 양이 상대적으로 증가하면 cycle이 증가하더라도 거의 일정한 전류 값을 갖고 $MnO_2$와 PVDF의 비가 20:1 이상의 조성에서는 균일한 CV 특성을 나타냈다. 이는 $MnO_2$가 효과적으로 촉매 작용을 한 것으로 판단되며 anodic polarization에 의한 산소 발생 과전압도 약 1.4V 정도로 감소되었다.동등한 MSIL 코드를 생성하도록 시스템을 컴파일러 기법을 이용하여 모듈별로 구성하였다.적용하였다.n rate compared with conventional face recognition algorithms. 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는 피험자의 머리 움직임에 의하여 도파민 유리가 과대평가되었으며 이는 이 연구에서 제안한 영상정합을 이용한 움직임 보정기법에 의해서 개선되었다. 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으로 보고, 수학적 창의성 중 특히 확산적 사고에 초점을 맞추어 개방형 문제가 확산적 사고의 요소인 유창성, 독창성, 유연성 등에 각각 어떤 영향을 미치는지 20주의 프로그램을 개발, 진행하여 그 효과를 검증하고자

• Journal of radiological science and technology
• /
• v.40 no.4
• /
• pp.633-638
• /
• 2017

The amount of radioactive waste has been rapidly increased with development of radiation treatment in medical field. Recently, it has been a common practice to use I-131 for thyroid cancer, F-18 for PET/CT and Tc-99m for diagnosis of nuclear medicine. All the wastes concerned have been disposed of by means of the self-disposal method, for example incineration, after storage enough to decay less than clearance level. IAEA proposed criteria for clearance level of waste which depends on the individual ($10{\mu}Sv/y$) and collective dose (1 man-Sv/y), and concentration of each nuclide (IAEA Safety Series No 111-P-1.1, 1992 and IAEA RS-G-1.7, 2004). In this study, specific radioactivity of radioactive waste contaminated with Re-186 was measured to confirm whether it meets the clearance level. Re-186 has long half life of 3.8 days relatively and emits beta and gamma radiation, therefore it can be applied in treatment and imaging purposes. The specific radioactivity of contaminated gloves weared by radiation workers was measured by MCA(Multi-channel Analyzer) which was calibrated by reference materials in accordance with the measuring procedure. As a result, comparison evaluation of decay storage period between the half-life which was calculated by attenuation curve based on real measurement and physical half-life was considered, and it is showed that the physical half-life is longer than induced half-life. Therefore, the storage period of radioactive waste for self-disposal may be curtailed in case of application of induced half-life. The result of this study will be proposed as ISO standard.

• Research in Plant Disease
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2012

A total of 20 agricultural organic materials including inorganic compounds, plant oils and plant extracts were used in the study for assessing the control efficacy on pepper diseases. Among inorganic compounds, only copper hydroxide showed inhibitory effect on both Phytophthora capsici causing Phytophthora blight and Colletotrichum acutatum causing anthracnose. Phosphorous acid inhibited the growth of P. capsici on PDA, and Sulfur/quicklime had it on that of C. acutatum. Plant essential oil, rosemary oil, and rapeseed oil among plant oils and plant extract of Japanese apricot/ginkgo nut inhibited the mycelial growth of the two pathogens. In the screening using pepper plant seedlings, the control efficacy on Phytophthora blight in 6-leaf stage of seedling was superior to that in 4-leaf stage of seedling. A protective effect on Phytophthora blight was displayed by copper hydroxide, sulfur/quicklime, water soluble calcium, phosphorous acid, plant essential oil, and cloves extract. When C. acutatum was inoculated by the non-wound method, copper hydroxide and rapeseed oil showed excellent protective activities with control values of 91.3% and 82.6%, respectively. However, copper hydroxide did not show any activity, when C. acutatum was inoculated after wounding pepper fruits. All organic materials never showed the curative effect on Phytophthora blight and anthracnose in pepper seedling assay and fruit assay.

• Journal of Chest Surgery
• /
• v.31 no.9
• /
• pp.873-876
• /
• 1998

Background: High-dose aprotinin has been reported to enhance the anticoagulant effects of heparin during cardiopulmonary bypass ; hence, som authors have advocated reducing the dose of heparin in patients treated with aprotinin. Material and Method: The ACT was measured before, during and after cardiopulmonary bypass, with Hemochron 801 system using two activators of celite(C-ACT) and kaolin(K- ACT) as surface activator. From June, 1996 to February, 1997, 22 adult patients who were scheduled for elective operation were enrolled in this study. Result: The ACT without heparin did not differ between C-ACT and K-ACT. At 30 minutes after anticoagulation with heparin and cardiopulmonary bypass, the average C-ACT was 928${\pm}$400 s; K-ACT was 572${\pm}$159s(p<0.05). After administration of protamine, C-ACT was 137${\pm}$26 s; K-ACT was 139${\pm}$28s, which were not statistically significant. Conclusion: Our results showed that the significant increase in the ACT during heparin- induced anticoagulation in the presence of aprotinin was due to the use of celite as surface activator, rather than due to enhanced anticoagulation of heparin by aprotinin. We conclude that the ACT measured with kaolin provides better monitoring of cardiac surgical patients treated with high dose aprotinin than does the ACT measured with celite. The patients treated with aprotinin should receive the usual doses of heparin.

• Journal of Chest Surgery
• /
• v.34 no.6
• /
• pp.477-484
• /
• 2001

Background: Initial symptoms for esophageal perforation have not been clarified, but when there is no early diagnosis and proper treatment to follow immediately after the diagnosis, it is fatal for the patients. Therefore, this study attempted to discover the factors that influence the prognosis of esophageal perforation to contribute to the improvement of the treatment result. Material and Method: The subjects of this study are 32 patients who came to the hospital with esophageal perforation from October, 1984 to June, 2000. This study examined the items for clinical observation such as patients' sex, age, cause of the perforation, perforation site, the time spent until the beginning of the treatment, symptoms caused by the perforation and its complication, and treatment methods. This study tried to find out the relationship between the survival of patients and each item. Result: There were 24 male and 8 female patients and their mean age was 49.7+16.4. For the causes of perforation, there were 14 cases(43%) of iatrogenic perforation, which ranked first, caused by the medical instrument operation and surgical damage. As for the perforation sites, thoracic esophagus was the most common site(26 cases of 81.2%) and chest pain was the most frequent symptom. The complication caused by esophageal perforation showed the highest cases in the order of mediastinitis, empyema, sepsis and peritonitis. After the treatment, there were 23 cases of survival and 9 cases of mortality. The total mortality rate was 28.1% and the main causes of mortality were sepsis and acute respiratory distress syndrome(ARDS). As for the treatment, 8 cases(25.0%) treated the perforation successfully using conservative treatment only. As for the surgical treatment, there were 5 cases(15.6%) of cervical drainage, 7 cases (21.8%) of primary repair and 12 cases(37.5%) of esophageal reconstruction after performing an exclusion-diversion. There were 18 cases(56.2%) of complete treatment of esophageal perforation at its initial treatment and in 14 cases(43.8%) of treatment failure at its initial treatment, patients were completely cured in the next treatment stage or died during the treatment. The cases of perforation in thoracic esophagus, complication into severe mediastinitis or sepsis and the cases of failure at initial treatment showed a statistically significant mortality rate (p<0.05).

• Journal of Chest Surgery
• /
• v.37 no.5
• /
• pp.401-409
• /
• 2004

Background: As the rupture of chordae and/or papillary muscle became the main cause of mitral valve regurgitation, mitral reconstructive surgery has a very important role. In this regard, we analyzed the clinical result and postoperative early result of operative treatment performed in our hospital, Material and Method: For this analysis, forty nine patients (male 26, female 23, mean age 49.0$\pm$16.5) who underwent mitral valve operation caused by the rupture of chordae and/or papillary muscle from August 1991 to April 2002 were reviewed. Among forty nine patients, twenty two (44.9%) received mital valve reconstruction and twenty seven (59.2%) received mitral valve replacement. Result: As to the pathological etiology of rupture of mitral and papillary muscle, twenty five cases (51.0%) were nonspecific degeneration, eleven cases (22.4%) were myxomatous degeneration, seven cases (14.3%) were subacute bacterial endocarditis. Three patients suffered mortality after operation (6.1%) and valve replacement was performed again on one patient because of remnant mitral insufficiency after valve reconstruction. The 5-year survival rate after operation for the entire mitral valve regurgitation patients was 81 .4%. We have also compared and analyzed the operation results of a group of patients who underwent valve reconstruction and the other group of patients who underwent valve replacement from thirty six patients who had suffered from mitral valve regurgitation caused by degenerative disease. The mortalities were 0% and 14.3%, respectively and the 5-year survival rates were 90.2% and 64.3%, respectively, but there were no statistical significance. Conclusion: The most common pathological etiology of mitral valve regurgitation caused by rupture of chordae and/or papillary muscle was nonspecific degeneration, In case of degenerative disease is the cause of mitral valve regurgitation, valve reconstruction showed better long-term effects in many respects and better operation results compared to valve replacement.

• Journal of Chest Surgery
• /
• v.34 no.12
• /
• pp.895-900
• /
• 2001

Background : This study aimed to evaluate the usefulness of preoperative placement of intraaortic balloon pump(IABP) in reducing operative risk and facilitating posterior vessel OPCAB in high risk patients with left main disease( 75％ stenosis), intractable resting angina, postinfarction angina, or left ventricular dysfunction(ejection fraction 35％). Material and Method : One hundred eighty- nine consecutive patients who underwent multi-vessel OPCAB including posterior vessel revascularization were studied. The patients were divided into group I(n=74) that received preoperative or intraoperative IABP and group II(n=115) that did not receive IABP. In group I, there were 39 patients with left main disease, 40 patients with intractable resting angina, 14 patients with left ventricular dysfunction and 7 patients with postinfarction angina. Ten patients received intraoperative IABP support due to hemodynamic instability during OPCAB. Result : There was one operative mortality in group I and two mortalities in group II. The average number of distal anastomoses was not different between group I and group II(3.5$\pm$0.9 vs 3.4$\pm$0.9, p=ns). There were no significant differences in the number of posterior vessel anastomosis per patient between the two groups. There were no differences in ventilator support time, length of hospital stay, and morbidity between the two groups. There was one case of IABP-related complication in group I. Conclusion : IABP facilitates posterior vessel OPCAB in high risk patients, with comparable surgical results to low risk patients

• Journal of Chest Surgery
• /
• v.35 no.6
• /
• pp.454-459
• /
• 2002

Clinical analysis of the relation between the clinical data of chest trauma patients and bone scan results was done to investigate the sensitivity and specificity of bone scan for the diagnosis of rib or chondral fracture. Material and Method： 445 patients treated due to chest trauma in Dongguk University Kyungju Hospital from July 1998 to December 2001 were studied. Age and sex distribution, causes of chest trauma, interval from the injury to arrival at hospital, final diagnosis, relationship between the chest pain and bone scan results, relationship between local tenderness and bone scan results, and sensitivity and specificity of bone scan were studied. Result： The male was 61.6% and the female was 38.4%. Age distribution was nearly even from the twenties to the sixties. The traffic accident was the most common cause of chest injury(60.4%). Most patients(76.6%) were arrived to the hospital within 6 hours after chest trauma. Rib fracture was the most common final diagnosis(46.5 %). The relationship between the duration of chest pain and tenderness and the bone scan results were significant, and the same in the relationship between the duration of local tenderness and the bone scan results, but the latter is more significant. The sensitivity of bone scan was 99.4% and the specificity was 90.4%. Conclusion： If the patient complains the chest pain continuously and the local tenderness around the chest is continued over 3 weeks, it is good to perform the bone scan. Further study including the MRI may be helpful for more evaluation in chest trauma patients.