• Journal of Environmental Health Sciences
• /
• v.24 no.3
• /
• pp.1-5
• /
• 1998

A spectrophotometric method was developed for the acidic solution stripped after an extraction of 0.5 to 2.5 ppm of Lead(II) from 50 mL of $Na_2S_2O_3$ solution into chloroform as the ion-pairs formed between their thiosulfate complexes and alkylamine, Aliquat336. Pb(II) in the stripped solution forms an complex with DDTC in pH 7.3 buffer solution, and was developed in yellow by copper replacement. The ydlow-colored solution have the maximum absorbance at 435 nm in the measurement of absorbance by UV-Visible spectrophotometer. The interference ions such as Fe(III), Hg (II), Al(III), Co, Cu, Ni, Zn, Ca, Sn, have great effects on the extraction, but they were overcomed by the usage of adequate masking agents before an extraction. At last, a good result was obtained in applying this method to synthetic water.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.11a
• /
• pp.175-178
• /
• 2005

본 연구는 물벼룩을 환경 중 UV-B와 유사한 강도에 노출시켜 8세대 이상 적응시킨 후 Daphnia magna의 UV-B 적응이 광독성 오염물질의 독성 민감도에 미치는 영향을 관찰하였다. UV-B에 적응된 D. magna는 UV-B와 Cu 동시 노출 시 자외선에 적응되지 않은 D. magna에 비해 높은 저항성을 보였다(p<0.1). 그 이유는 D. magna가 UV-B에 적응되는 과정에서 oxidative stress에 대한 방어/회복 능력이 증가하여 동일한 ROS를 생성하는 Cu에 노출되었을때 효과적으로 저항할 수 있었기 때문으로 해석된다. Pyrene, fluoranthene, anthracene, As, Cd, Ni은 독성이 증가하거나 동일하게 나타났다.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2004.05a
• /
• pp.47-50
• /
• 2004

The defenses against free radical damage include specialized repair enzymes that correct oxidative damages in DNA, and detoxification systems such as superoxide dismutases. These defenses may be coordinated genetically as global responses. We hypothesized that the expression of the SOD and the DNA repair genes would inhibit DNA damage under oxidative stress. Therefore, the protection of E. coli mutants deficient in SOD and DNA repair genes $(sod^-\;xth^-\;and\;nfo^-)$ was demonstrated by transforming the mutant strain with a plasmid pYK9 which encoded Photobacterium leiognathi CuZnSOD and human AP endonuclease. The results show that survival rates were increased in $sod^+\;xth^-\;nfo^+$ cells compared to $sod^-\;xth^-\;ap^+,\;sod^-\;xth^-\;ap^-,\;and\;sod^+\;xth^-\;ap^-$ cells under oxidative stress generated from 0.1 mM Paraquat or 3 mM $H_2O_2$. The data suggested that, at least, SOD and DNA repair enzymes may have collaborate protection and repair of the damaged DNA. Additionally, both enzymes are required for protection against free radicals.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.306-307
• /
• 2006

The sinter-bonding behavior of iron based powder mixtures was investigated. To produce the green compacts to be joined the following powders based on $H{\ddot{o}}gan{\ddot{a}}s$ AB grade NC 100.24 plain iron powder were used: NC 100.24 as delivered, PNC 30, PNC 60 and NC 100.24 + 4%Cu powder mixtures. Dimensional behaviour of all those materials during the sintering cycle was monitored by dilatometry. Simple ring shaped specimens as the outer parts and cylindrical as the inner parts were pressed. The influence of parts' composition on joining strength was established. Diffusion of alloying elements: copper and phosphorous, across the bonding surface was controlled by metallography, SEM and microanalysis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.3
• /
• pp.194-199
• /
• 2011

In this study, non-stoichiometric 1-x$[(K_{0.5}Na_{0.5})_{0.97}(Nb_{0.96}Sb_{0.04})O_3]$ + x $CeMnO_3$ + 0.8 mol%CuO + 0.2 wt% $Ag_2O$ (x=0, 0.005) ceramics were prepared by a conventional mixed oxide and carbonate method, their dielectric and piezoelectric properties were investigated with the variations of sintering temperature. As $CeMnO_3$ substitution incereased, the density, piezoelectric constant($d_{33}$) and dielectric constant($\varepsilon_r$) were increased and the mechanical quality factor(Qm) was decreased. At the sintering temperature of $1100^{\circ}C$, the density, electromechanical coupling factor($k_p$), dielectric constant($\varepsilon_r$) and piezoelectric constant($d_{33}$) of 0.5mol% $CeMnO_3$ specimen showed the optimun values of 4.475 $g/cm^2$, 0.437, 552 and 166 pC/N, respectively. However, the mechanical quality factor($Q_m$) showed the minimum value of 380.

• The Korean Journal of Ceramics
• /
• v.6 no.4
• /
• pp.354-358
• /
• 2000

The SnO$_2$film was deposited on a corning glass 1737 substrate by plasma enhanced chemical vapor deposition using a gas mixture of SnCl$_4$, $O_2$, and Ar. The film thickness was measured using $\alpha$-step and was about 9400$\AA$. The conventional X-ray diffractometry and pole figure attachment were used to refine the crystal structure of SnO$_2$ thin film. Six pole figures, (200), (211), (310), (301), (321), and (411), were measured with CoK$_\alpha$ radiation in reflection geometry. The X-ray diffraction data were measured at room temperature using CuK$_\alpha$ radiation with graphite monochromator. The agreement between calculated and observed patterns for the normal direction of SnO$_2$ thin film was not satisfactory due to the severely preferred orientation effect. The Rietveld refinement of heavily textured SnO$_2$ thin film was successfully achieved by adopting the pole density distribution of each reflection obtained from the inverse pole figure as a correction factor for the preferred orientation effect. The R-weighted pattern, R$_wp$, was 15.30%.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.4
• /
• pp.238-243
• /
• 2001

Mass reduction and physicochemical properties of the produced compost were investigated during composting domestic food wastes without additive. A small composter used in this study had the height of 15 cm from the center of bottom half circle (diameter 24 cm) up to under the lid, the side length of 50 cm and the horizontal lid angle of $50^{\circ}$ and was operated at the heating unit temperature of $85^{\circ}$. It was mixed by the rotating arm for two minutes in every half hour while supplied with air flow at 3 L/min for 10 minutes in every half hour. This condition was found in a preliminary experiment as optimal for keeping the water content of composting material in the optimal range without adding any bulking materials. The domestic food wastes were added into the composter at the rate of 1 kg/day without additives during composting. The results were as follows; during the composting process, water content maintained in the range of $51.0{\sim}53.5%$. Hemicellulose and lignin contents did not show any tendency, but cellulose content decreased. During the composting process, $NH_3-N$ and $NO_2-N$ were not detected due to nitrification. The contents of inorganic compounds did not increase during the composting process. They were in the range of $1.32{\sim}1.71%\;P_2O_5$, $1.29{\sim}1.48%\;CaO$, $0.41{\sim}0.49%\;MgO$, and $0.38{\sim}0.74%\;K_2O$. For 20 days, weight reduction rate was 67.5% in wet basis, and decomposition rate was 48% in dry basis. Concentration of heavy metals (Cu, Cr, Cd, Pb, Zn, Hg, As) was less than the limiting value of the compost. Maturity of the produced compost was 3 grade through reaching maximum temperature of $46{\sim}48^{\circ}C$.

• Economic and Environmental Geology
• /
• v.35 no.6
• /
• pp.509-521
• /
• 2002

The purpose of this study is to find out geochemical characteristics of stream sediments which are good indicator of geochemical hazard valuation and water in primary channels of the Jangheung area. We separated three groups which were granitoid area, granite gneiss area and tuffeous area by petrological properties. Physical and chemical characteristics of stream water such as temperature, pH, and EC were measured in the field between 1999 and 2001 and stream sediments samples were collected from April to May in 1999. For the chemical analysis of stream sediments samples, XRF, ICP-AES and NAA were used. The contents of the major elements had a similar contents in three groups and those of rare earth elements in granite gneiss area were lower value than those of other two groups. Zn and Cu were higher value than the other toxic elements. Through the enrichment factor and enrichment index features of the elements, we knew that $Fe_2O_3$, MgO, $TiO_2$, MnO and Eu, Yb of the tuffeous area samples and Co, Cr, Zn were enriched.

• Korean Journal of Plant Resources
• /
• v.9 no.3
• /
• pp.211-217
• /
• 1996

As a part of studies on the development of a Gugisuen(Lycium chinense M.), which is one of the unutilization of waste resources, we investigated the composition of fatty acid and amino acid according as picking period and varieties of Gugisuen. The chemical components of Gugisuen were as follows : 1. Proximate composition of Gugisuen were Cheongyang native had the highest contents of crude lipid, crude protein, total sugar, and the contents of crude protein, total sugar, and reducing sugar was the highest picked on June 20. 2. The contents of $P_2O_5$, $K_2O$, CaO, MgO, Cu, and Mn were higher in Cheongyang native than that of other varieties. And mineral contents of Gugisuen picked on May 10 were the highest. 3. The major fatty acids were linoleic, linolenic acids, and these unsaturated fatty acids composed about 50% of total fatty acids. Fatty acid compositions between each varieties were not significant, and those components were the highest in Gugisuen picked on May 10. 4. Eighteen amino acids were identified from Gugisuen, glutamic acid, the highest content was $10.05\sim10.94%$ and these contents increased in the order to aspartic acid > glycine > alanine > leucine > lysine. The contents of serine, arginine, methionine, cystine-2 and isoleucine were higher in late harvest time and glutamic acid and tryptophane were higher in early harvest time.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.4
• /
• pp.15-20
• /
• 2013

We investigated the flux pinning properties of both 10 mol% Zr-and Sn-doped $YBa_2Cu_3O_{7-{\delta}}$ (YBCO) films with the same thickness of ~350 nm for a comparative purpose. The films were prepared on the $SrTiO_3$ (STO) single crystal substrate by the metal-organic deposition (MOD) process. Compared with Sn-doped YBCO film, Zr-doped one exhibited a significant enhancement in the critical current density ($J_c$) and pinning force density ($F_p$). The anisotropic $J_{c,min}/J_{c,max}$ ratio in the field-angle dependence of $J_c$ at 77 K for 1 T was also improved from 0.23 for Sn-doped YBCO to 0.39 for Zr-doped YBCO. Thus, the highest magnetic $J_c$ values of 9.0 and $2.9MA/cm^2$ with the maximum $F_p$ ($F_{p,max}$) values of 19 and $5GN/m^3$ at 65 and 77 K for H // c, respectively, could be achieved from Zr-doped YBCO film. The stronger pinning effect in Zr-doped YBCO film is attributable to smaller $BaZrO_3$ (BZO) nanoparticles (the average size ${\approx}28.4$ nm) than $YBa_2SnO_{5.5}$ (YBSO) nanoparticles (the average size ${\approx}45.0$ nm) incorporated in Sn-doped YBCO film since smaller nanoparticles can generate more defects acting as effective flux pinning sites due to larger incoherent interfacial area for the same doping concentration.