• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1757-1762
• /
• 2006

A solvent sublation using salphen as a ligand was studied and applied for the determination of trace Ni(II), Co(II) and Cu(II) in water samples. The fundamental study was investigated by a solvent extraction process because the solvent sublation was done by extracting the floated analytes into an organic solvent from the aqueous solution. The salphen complexes of Ni(II), Co(II) and Cu(II) ions were formed in an alkaline solution of more than pH 8 and then they were extracted into m-xylene. It was known that the each metallic ion formed 1 : 1 complex with the salphen and the logarithmic values of extraction constants for the complexes were 3.3 5.1 as an average value. Based on the preliminary study, the procedure was fixed for the separation and concentration of the analytes in samples. Various conditions such as the pH of solutions, the influence of $NaClO_4$, the bubbling rate and time of $N_2$ gas, and the type of organic solvent were optimized. The metal-salphen complexes could be extracted into m-xylene from the solution of more than pH 8, but the pH could be shifted to acidic solution of pH 6 by the addition of $NaClO_4$. In addition, the solvent sublation efficiency of the analytes was increased by adding $NaClO_4$. The recovery of 97-115% was obtained in the spiked samples in which given amounts of 0.3 mg/L Ni(II), 0.8 mg/L Co(II) and 0.04 mg/L Cu(II) were added.

• Journal of the Korean institute of surface engineering
• /
• v.5 no.3
• /
• pp.77-85
• /
• 1972

A method of preparation of synthetic ignorgaic coating on copper (patina) has been presented . An Eh--pH diagram was constructed for the present Cu-H2O-SO$_4$ system using the most recently available thermodynamic data. In the path of the patination at room temperature the general behaviour of copper in acidic copper sulfate solutions with potassium chlorate as an oxidizing agent appeared to follow those predictable in this Eh-pH diagram. In the presence 0.05 molar cupric sulfate at a temperature of about 28$^{\circ}C$ a green brochantite (CuSO$_4$$.$3Cu(OH)$_2$) layer was formed on copper sheet in 20 days. In a solution having an initial pH of 3.5 the development of a brochantite coating has been observed to take place in two stages. In the first, a layer of cuprous oxide formed on the copper at a relatively rapid rate. In the ensuing step the outer layer of cuptrite was oxidized at much slower rate to form brochantite. The syntetic coatings appeared to consist of crystal-lites of brochanitite growing perpendicular to the cuprose oxide surface. The outer tips of the -crystallites were reasily broken off and gave to the layer a rather chalky character. Underneath, at the brochantite Cu$_2$O interface, however, the green layers were firmely attached. The effect of reagent concentration , solution agitation , and moderate temperature increase were investigated to improve the quality of coating. So also in a qualitative way were the effect of light.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.338-341
• /
• 1995

The surface properties after plasma etching of Al(Si, Cu) solutions using the chemistries of chlorinated and fluorinated gases with varying the etching time have been investigated using X-ray Photoelectron Spectroscopy. Impurities of C, Cl, F and O etc are observed on the etched Al(Si, Cu) films. After 95% etching, aluminum and silicon show metallic states and oxized (partially chlorinated) states, copper shows Cu metallic states and Cu-Clx(x$CuCl_x$ (x$CuCl_x$ (1

• Journal of Environmental Science International
• /
• v.30 no.1
• /
• pp.57-67
• /
• 2021

Photocatalytic green energy H2 production utilizing inexhaustible solar energy has been considered as a potential solution to problems of energy scarcity and environmental contamination. However, the design of a cost-effective photocatalyst using simple synthesis methodology is still a grand challenge. Herein, a low-cost transition metal, Cu-loaded one-dimensional TiO2 nanorods (Cu/TNR) were fabricated using an easy-to-use synthesis methodology for significant H2 production under simulated solar light. X-ray photoelectron spectral studies and electron microscopy measurements provide evidence to support the successful formation of the Cu/TNR catalyst under our experimental conditions. UV-vis DRS studies further demonstrate that introducing Cu on the surface of TNR substantially increases light absorption in the visible range. Notably, the Cu/TNR catalyst with optimum Cu content, achieved a remarkable H2 production with a yield of 39,239 µmol/g after 3 h of solar light illumination, representing 7.4- and 27.7-fold enhancements against TNR and commercial P25, respectively. The notably improved H2 evolution activity of the target Cu/TNR catalyst was primarily attributed to its excellent separation and efficiently hampered recombination of photoexcited electron-hole pairs. The Cu/TNR catalyst is, therefore, a potential candidate for photocatalytic green energy applications.

• Korean Journal of Crystallography
• /
• v.16 no.1
• /
• pp.38-42
• /
• 2005

The crystal structure of Bis(ethylenediamine) cuprate(II)$\cdot$dichromate, $Cu(C_2H_8N_2)_2{\cdot}Cr_2O_7$, has been determined by X-ray crystallography. Crystal data: a=5.682(2), b=8.567(3), c=14.839(3) ${\AA},\;{\alpha}=97.50(2),\;{\beta}=101.06(1),\;{\gamma}=109.38(2)^{\circ}$ Triclinic, P-1 (SG No=2), Z=2, V=653.9(2) ${\AA}^3,\;D_c=2.030gcm^{-3},\;{\mu}=3.273mm^{-1}$. The structure was solved by Patterson method and refined by full matrix least-square methods uslng unit weights. The final R and S values were $R_1=0.0256,\;R_w=0.0708,\;R_{all}=0.0316,\;S=1.151$ for the observed 2291 reflections. The two cupper complex ion has the usual distorted octahedral structure with mean four Cu-N distances of 2.010(3) $\AA$ and the longer mean Cu-O distance of 2.525(2) $\AA$. The Cu-complex and dichromate ions are linked to form infinite chain arranged alternatively along the [111]-direction. The neighboring chains in the (0-11) plane are connected with N1-O5 and N3-O1 hydrogen bonds.

• Journal of the Korean Chemical Society
• /
• v.22 no.5
• /
• pp.295-303
• /
• 1978

The dipole moments for octahedral [Co(III)-$O_3N_3$], tetrahedral [M(II)-$O_2N_2$] and square planar [M(II)-$O_2N_2$] types complexes are calculated by the expansion method for spherical harmonics using the valence basis sets for the central metal ion and the single basis set orbital ($2p_z$) for ligands. The calculated dipole moments for these complexes are in agreement with the experimental values.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.6
• /
• pp.663-665
• /
• 1992

The superconducting $YBa_2Cu_4O_8$ was synthesized in oxygen condition at 1 atm. The starting material with 1 : 2 : 4 composition was obtained by pyrolysis of EDTA complex, which was converted to 1-2-3 phase during densification, followed by the 1-2-4 phase recovery at $810^{\circ}C$ . The phase presents were identified by XRD, TG, DTA and AC magnetic susceptibility. Our data indicated that considerable amounts of 1-2-4 phase formed but with the 1 : 2 : 3 phase or possibly 2-4-7 as visible. As the P($O_2$) increased with temperature, impurity peak, CuO ($2{\Theta}$ = 38.8), gradually decrease, and we conclude that the 1-2-4 phase is predominant bulk superconductor under the high oxygen pressure.

• Journal of the Korean Ceramic Society
• /
• v.37 no.12
• /
• pp.1212-1220
• /
• 2000

Bi-2223 초전도체계에서 석출물을 flux-pinning center로 이용할 수 있는지 가능성을 타진하기 위하여 $Bi_{1.8}$P $b_{0.4}$S $r_{2}$C $a_{2.2}$C $u_3$ $O_{8}$ 조성을 가진 Bi-2223/Ag 선재를 반응온도, 산소분압, 시간 등을 변화시키면서 열처리를 행하였다. 열처리 후 석출물들은 XRD, SEM, TEM, EDS로 분석하였다. Bi-2223 모상내의 (Ca, Sr)$_2$(Pb,Bi) $O_4$, B $i_{0.5}$ P $b_3$S $r_2$C $a_2$Cu $O_{12+}$$\delta$/ (3221)와 같은 2차상들의 크기와 분포는 2223 입자들의 연결성을 파괴하지 않고 열처리 조건에 의해서 조절할 수 있었다. 서냉 열처리가 된 시편은 임계전류밀도( $J_{c}$)값이 증가하였는데, 이는 2223 입자내 나노미터 크기로 형성된 석출물들이 flux-pinning sites로 작용한 것으로 추정된다.다.

• Korean Journal of Materials Research
• /
• v.15 no.4
• /
• pp.263-270
• /
• 2005

In order to prepare the uniform copper particles from copper chloride solution, the reduction behavior of copper particles from copper chloride and the effects of reduction agent and dispersing agent was investigated. In the case that 2.56 M of $C_6H_8O_6$ was used as a reduction agent, the highly dispersed Cu particles with sharp size distribution were generated from 0.96M of copper chloride solution, and the size of Cu particles was $6\~10\;{\mu}m$. To form $Cu(NH_3)_4Cl_2$ complex solution, $NH_4OH$ was added in the copper chloride solution before the reductive reaction of Cu ion. The generated Cu particles have a two kind of shape, spherical and rod-like. In the case that $N_2H_4{\cdot}H_2O$ was used as a reduction agent, the very fine spherical Cu particles with the size of $0.2\~0.5\;{\mu}m$ was obtained. Arabic gum as a dispersing agent was more effective than $Na_4P_2O_7{\cdot}10H_2O$.

• Journal of the Korean Ceramic Society
• /
• v.38 no.6
• /
• pp.522-530
• /
• 2001

발굴된 과거 고려청자의 화학성분조성과 물리적 특성에 대한 평가를 하고 미량성분의 청자의 발색에 미치는 영향을 고찰한 결과, 고려 청자 태토는 Fe$_2$O$_3$가 2%, TiO$_2$가 0.8% 함유되어 있었으며, 청자유는 석회.장석유로서 Fe$_2$O$_3$가 1.0~1.2%, TiO$_2$가 0.16% 포함되어 있었다. 비색청자의 경우 미량성분인 MnO$_2$가 P$_2$O$_{5}$의 함량이 0.37%와 0.76%, CuO는 300~500ppm 정도 함유하고 있었다. 반사율 측정 결과 일반적인 청자가 540~570nm의 장파장대에서의 반사율이 급격히 떨어지는데 반하여, 13세기 비색 청자의 것은 적색 파장대에서 10%이상 높았다. CoO는 미량 첨가로도 유약의 청색 파장대 반사율이 높고, 적색 파장대의 반사율이 급격히 떨어지며 청자 발색에 부정적인 영향을 미쳤다. CuO는 0.05%를 첨가했을 경우 적색 파장대에서 반사율 곡선이 높게 나타나고 있어 비색 청자발색에 효과적이었다. 또한 명도를 나타내는 L*값도 CuO가 첨가된 유약이 가장 높았고, 비색청자의 색상은 녹청자에 비해 맑고 깊은 색감을 보였다.