• Journal of Electrochemical Science and Technology
• /
• v.7 no.4
• /
• pp.316-326
• /
• 2016

Development and discovery of efficient, cost-effective, and robust electrocatalysts are imperative for practical and widespread implementation of water electrolysis and fuel cell techniques in the anticipated hydrogen economy. The electrochemical reactions involved in water electrolysis, i.e., hydrogen and oxygen evolution reactions, are complex inner-sphere reactions with slow multi-electron transfer kinetics. To develop active electrocatalysts for water electrolysis, the physicochemical properties of the electrode surfaces in electrolyte solutions should be investigated and understood in detail. When electrocatalysis is conducted using nanoparticles with large surface areas and active surface states, analytical techniques with sub-nanometer resolution are required, along with material development. Scanning electrochemical microscopy (SECM) is an electrochemical technique for studying the surface reactions and properties of various types of electrodes using a very small tip electrode. Recently, the morphological and chemical characteristics of single nanoparticles and bio-enzymes for catalytic reactions were studied with nanometer resolution by combining SECM with atomic force microscopy (AFM). Herein, SECM techniques are briefly reviewed, including the AFM-SECM technique, to facilitate further development and discovery of highly active, cost-effective, and robust electrode materials for efficient electrolysis and photolysis.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.1
• /
• pp.1-11
• /
• 1993

A suppression of turbulent fluid motion and a control of oxygen and dopants could be improved by application of magnetic field in Czochralski growth of silicon. The effect of an axial magnetic field on Czochralski system was numerically calculated. The fluid motions induced by temperature gradients and by crystal and crucible rotations were suppressed by magnetic force. The S/L interface was gradually flattened in proportion to the increase of magnetic field due to a reduced ascending velocity in the vicinity of center line. The t.emperature distributions in the melt at 8=0.3 Tesla were similar to those analyzed by the conduction heat transfer only. The dissipated amounts of heat flux from melt and crystal surfaces by Ar gas blowing was Jess than 3 %.

• KSBB Journal
• /
• v.8 no.4
• /
• pp.351-357
• /
• 1993

Three immobilization techniques and free cell system were tested to determine the most effective technique for the treatment of pulp waste effluent. The tests were conducted using Phanerochaete chrysosporium as a biocatalyst in a process designed to treat pulp waste effluent. The results show that Ca-alginate gel was the best immobilization material. The chosen material improved the stability and increased the removal efficiency of the system. The experiment using the chosen material was mom- bored for 400 hours with no significant changes in the state of the fungus. Common problems with other immobilization materials and free cell system were oxygen transfer resistance caused by air channelling and clogging in the bioreactor.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.140.2-140.2
• /
• 2012

The silicate carbon star IRAS 09425-6040 shows very conspicuous crystalline silicate dust features and excessive emission at far infrared. To investigate properties of dusty envelopes around the object, we use radiative transfer models for axisymmetric and sphericallly symmetric dust distributions. We perform model calculations for various possible combinations of dust shells and disks with various dust species. We compare the model results with the observed spectral energy distributions (SEDs) including the IRAS, ISO, AKARI, MSX and 2MASS data. We find that a model with multiple disks of amorphous and crystalline silicate and multiple spherical shells of carbon dust can reproduce the observed SED fairly well. This supports the scenario for the origin of silicate carbon stars that oxygen-rich material was shed by mass loss when the primary star was an M giant and the O-rich material is stored in a circumbinary disk. Highly (about 75 %) crystallized forsterite dust in the disk can reproduce the conspicuous crystalline features of the ISO observational data. This object looks to have a detached silicate and H2O ice shell with a much higher mass-loss rate. It could be a remnant of the chemical transition phase. The last phase of stellar winds of O-rich materials looks to be a superwind.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.1
• /
• pp.85-89
• /
• 2004

Geometrical structures of [Pd(L)$Cl_2$] with oxathia macrocycles have been calculated using ab initio secondorder Moller-Plesset (MP2) and Density Functional Theory (DFT) methods with triple zeta plus polarization (TZP) basis set level. In optimized Pd(L)$Cl_2$ complexes, Pd(II) locates at the center surrounded by a square planar array of two sulfurs on an oxathia macrocycle and two chlorides. The endo-Pd(II) complexes with an axial (Pd${\cdots}$O) interaction are more stable than the exo-Pd(II) complexes without the interaction. In the endo-Pd(II) complexes, the atomic charge of the oxygen atom moves to Pd(II) via the axial ($Pd{\cdots}$O) interaction and then, the charge transfer from Pd(II) to the S-atoms occurs stepwise via ${\pi}$-acceptors of the empty d-orbitals.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.13 no.1
• /
• pp.26-38
• /
• 2007

Interstitial lung disease (ILD) is characterized by progressive scarring of the lung leading to restriction and diminished oxygen transfer. Clinically, the presenting symptoms of ILD are nonspecific (cough and progressive dyspnea on exertion) and are often attributed to other diseases, thus delaying diagnosis and timely therapy. In this study, I analyzed the 10 chinese papers of interstitial lung diseases(ILD). The etiology are body resistance weakness(本虛) and pathogenic factor prevailing(標實). The body resistance weakness(本虛) including deficiency of the lung(肺虛), deficiency of the kidney(腎虛), deficiency of the spleen(脾虛), deficiency of Qi and Yin(氣陰兩虛), pathogenic factor prevailing(標實) including stagnation of phlegm(痰濁), blood stasis(瘀血), noxious heat(熱毒). As an treatment aim at supplementing lung and kidney(益肺腎), resolving phlegm and blood stasis(化痰瘀).

• KSBB Journal
• /
• v.5 no.1
• /
• pp.25-35
• /
• 1990

In the Xanthan gum fermentation by Xanthomonas campestris there are problems of the large energy consumption by long fermentation time, the mass transfer of oxygen and nutrients by high viscous fermentation broth. In this study, the media optimization and the fed batch fermentation were carried out to decrease fermentation time and increase Xanthan gum yield. The $O_2$ uptake rate (OUR) and $CO_2$ evolution rate(CER) which were obtained from the analysis of fermentation exit gas using a gas chromatograph were investigated. As a result, the fermentation time decreased at optimal assimilable nitrogen concentration but increased at poor or rich assimilable nitrogen concentration, the Xanthan gum biosynthesis was stimulated under the limited condition of assimilable nitrogen source and the optimum fermentation medium was obtained as follow; Glucose=30g / l, Peptone=8.0g / l, $K_2HPO_4=2.0g/l$, $MgS0_47H_2O=10g/l$, Sodium acetate=20g/l, Sodium pyruvate=0.5g/1. As the agitation speed and nitrogen concentration increased, the $O_2$ uptake rate and $CO_2$ evolution rate increased. The OUR and CER were 37.3mmol $O_2/\;l$ hr and 20.2 mmol $CO_2/\;L$ hr at peptone 11g / l and agitation speed 990RPM, respectively. In fed batch fermentation, the final concentration of Xanthan gum was enhanced up to 29g / l.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.10
• /
• pp.850-854
• /
• 2011

Nano-fibers of the $Li[Ni_{1/3}Co_{1/3}Mn_{1/3}]O_2$ electrode were synthesized from a metal oxide precursor using the electrospun method. The XRD patterns of all prepared powders showed a hexagonal ${\alpha}$ - $NaFeO_2$ structure (space group: R-3 m, 166). Scanning electron microscopy showed that all the synthesized samples were comprised of nanofibers with a size of 100~800 nm. Among the samples tested, the calcined $Li[Ni_{1/3}Co_{1/3}Mn_{1/3}]O_2$ nanowires in oxygen heating atmosphere showed a high charge and discharge capacity of 239.22 and 172.81 $mAhg^{-1}$ at the $1^{st}$ cycle, respectively. In addition, the charge transfer resistance was also improved significantly compared to the other samples.

• Journal of the Korean Society for Heat Treatment
• /
• v.16 no.4
• /
• pp.191-196
• /
• 2003

For improvement of the wear performance of Ti alloy, vacuum-carburizing technique was tried for the first time using propane atmosphere. During the low pressure carburizing carbide was formed at the surface and carbon transfer was occurred from the carbide to the matrix. It was found that: (i) surface hardness increased with the reduction of operating pressure and time; (ii) optimum hardness distribution could be obtained with the proper choice of temperature and carbon flux control; and, (iii) case depth was largely influenced not by time but by temperature. The two steps process was recommended for obtaining thick case depth and high surface hardness of Ti alloy. For the low oxygen partial pressure, it was necessary to introduce additional CO gas to the atmosphere.Grain boundary oxidation and non-uniformity could be prevented.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.78-81
• /
• 1986

The photosensitized lysis of egg lecithin lipid membranes (liposomes) have been performed to UV-B light (270-320 nm) by L-tryptophan(L-Trp) and its peptide such as N-acetylphenylalanyl-L-tryptophan(NAPT) incorporated in the liposomes(ca. 0.1% by weight) or in the external buffer (0.1-0.3 mM). Requirement of oxygenation suggests that the lysis of liposomes is caused by the photosensitized oxidation of lipids. There was significant protection against lysis photosensitized by Trp in the external buffer by low concentration of ferricyanide (0.8 mM), but there was no effect on the lytic efficiency by $N_3^-$ which is singlet oxygen($^1O_2$) quencher, indicative of an electron transfer mechanism involved in the photosensitization. The small change of the lytic efficiency with increasing pH from 4 to 9 was interpreted by large target theory and subsequently indicates that superoxide($O_2^-$) may be an active intermediate for the oxidation. The efficiency of photosensitization of Trp was higher than that of NAPT under the same experimental condition. The weak lytic efficiency of liposomes photosensitized by NAPT was enhanced by incorporating NAPT in liposomes, but it was again quenched by ${\beta}$-carotene incorporated in the bilayer of liposomes. These results indicate that a portion of liposome lysis may be due to $^1O_2$ formation from the excited NAPT.