• 제목/요약/키워드: oxygen production rate

검색결과 402건 처리시간 0.026초

트레이닝 형태의 차이가 운동 특이성(exercise specificity)과 전사효과(transability)에 미치는 영향 (Effects of Different Exercise Training Mode on Exercise Specificity and Transability)

  • 김영일;곽이섭
    • 생명과학회지
    • /
    • 제19권7호
    • /
    • pp.968-975
    • /
    • 2009
  • 본 연구에서는 8주의 유산소 및 저항성 트레이닝 그룹으로 나누고 그에 따른 트레이닝이 서로 다른 테스트를 하였을 때, 운동 특이성 효과(specific effect)와 전사효과(transferabilty)에 영향을 미치는 지를 연구하였다. 결론적으로 8주간의 유산소 및 저항성 트레이닝은 동일한 테스트를 통하여 운동의 특이성은 나타냈으나 서로 다른 테스트를 해 봄으로써 전사효과의 향상은 나타내지 못했다. 전사효과를 나타내지 못한 가장 큰 이유는 8주라는 기간이 중추신경과 근육의 적응하기에는 다소 짧은 기간이라 사료되며 추후의 연구에서는 트레이닝 기간등을 고려한 좀 더 세분화된 연구가 필요하다고 생각된다.

유기성 폐기물의 혐기성 소화효율 향상을 위한 열가용화 하수슬러지의 통합소화 (Integrated Digestion of Thermal Solubilized Sewage Sludge to Improve Anaerobic Digestion Efficiency of Organic Waste)

  • 오경수;황정기;송영주;김민지;박준규;박대원
    • 한국물환경학회지
    • /
    • 제38권2호
    • /
    • pp.95-102
    • /
    • 2022
  • Studies for improving the efficiency of the traditional anaerobic digestion process are being actively conducted. To improve anaerobic digestion efficiency, this study tried to derive the optimal pretreatment conditions and mixing conditions by integrating the heat solubilization pretreatment of sewage sludge, livestock manure, and food waste. The soluble chemical oxygen demand (SCOD) increase rate of sewage sludge before and after heat solubilization pretreatment showed an increased rate of 224.7% compared to the control group at 170℃ and 25 min and showed the most stable increase rate. As a result of the biomethane potential test of sewage sludge before and after heat solubilization pretreatment, the total chemical oxygen demand (TCOD) and SCOD removal rates increased as the heat solubilization temperature increased, but did not increase further at temperatures above 170℃. In the case of methane generation, there was no significant change in the cumulative methane generation from 0.134 to 0.203 Sm3-CH4/kg-COD at 170℃ for 15 min. As a result of the integrated digestion of organic waste, the experimental condition in which 25% of the sewage sludge, 50% of the food waste, and 25% of the livestock manure were mixed showed the highest methane production of 0.3015 m3-CH4/kg-COD, confirming that it was the optimal mixing ratio condition. In addition, under experimental conditions mixed with all three substrates, M4 conditions mixed with 25% sewage sludge, 50% food waste, and 25% livestock manure showed the highest methane generation at 0.2692 Sm3-CH4/kg-COD.

허혈-재관류 적출심장에서 Arachidonic Acid에 의한 산소라디칼 생성 및 심근손상 (Arachidonate-induced Oxygen Radical Production and Cellular Damage in Ischemic-Reperfused Heart of Rat)

  • 이윤송;김용식;박성호;명호진;김명석
    • 대한약리학회지
    • /
    • 제27권2호
    • /
    • pp.109-118
    • /
    • 1991
  • 허혈심근의 재관류시 arachidonic acid가 반응성 산소대사물의 발생원으로서 심근 손상에 미치는 영향을 검토하였다. Langendorff 관류장치를 이용하여 흰쥐 적출심장을 0.5ml/min의 저용량으로 관류 (45분)한 후 정상관류 (7 ml/min)로 복귀 시키므로써 실험적인 허혈-재관류 심장을 만들었다. 재관류시 Na arachidonate $(10^{-7}{\sim}10^{-2}{\mu}g/ml)$를 투여한 후 superoxide anion 생성을 관찰하고, 심근 손상의 지표로 lactic dehydrogenase(LDH)유리를 측정 하였으며 이들에 대한 각종 arachidonic acid 대사 억제 약물의 영향을 비교 검토하였다. Superoxide anion 생성은 SOD-억제성 ferricytochrorme C 환원 반응을 이용하였다. 연구성적은 다음과 같다. 1) 저용량 관류후 재관류시 ferricytochrorme C환원은 superoxide dismutase (SOD, 300 U/ml) 및 indomethacin (60 nmole/ml), ibuprofen $(30\;{\mu}g/ml)$에 의하여 억제되었다. 2) Na arachidonate는 용량의존적으로 ferricytochrorme C 환원을 증가 시켰으며 반응성 산소대사물 제거효소인 superoxide dismutase (SOD, 300 U/ml)에 의하여 현저히 억제되었다. 3) Na arachidonate $(10^{-3}\;{\mu}g/ml)$에 의한 superoxide anion 생성은 cyclooxygenase 억제약물인 indomethacin (60 nmol/ml), lipooxygenase 억제약물인 nordihydroguaiaretic acid$(NDGA,\;0.1\;{\mu}mole/ml)$, arachidonic acid의 substrate inhibitor인 eicosatetraynoic acid $(ETYA,\;1\;{\mu}g/ml)$에 의하여 현저히 억제되었다. 4) Na arachidonate는 LDH 유리를 증가시켰으며 SOD에 의하여 유의하게 억제 되었다. 5) Na archidonate에 의한 LDH 유리증가는 indomethacin, NDGA, ETYA에 의하여 유의하게 억제 되었다. 이상의 결과로 흰쥐의 허혈-재관류심근에서 arachidonic acid는 그 대사 과정에서 반응성 산소대사물을 발생하고 이는 심근세포손상에 부분적으로 기여할 수 있을 것으로 여겨졌다.

  • PDF

뱀장어(Anguilla japonica) 적정 사육관리를 위한 양식기술 현황 (State of Aquaculture Management for Optimal Rearing of Eel Anguilla japonica)

  • 손맹현;김강웅;김경덕;김신권
    • 한국수산과학회지
    • /
    • 제44권4호
    • /
    • pp.359-365
    • /
    • 2011
  • This study was conducted to investigate the production, elver stocking, rearing facilities and rearing method of eel culture to determine aquaculture management conditions for optimal rearing of eel Anguilla japonica. The production of eel culture was evaluated by the proportion of eels from the main inland fin fish species production in Korea. Elver stocking was assessed by the elver stocking densities of pond and recirculation culture. Rearing facilities were investigated according to the rearing tank size proportion of the pond and recirculation culture. We selected sample farms by region and by size. We visited sample farms and recorded the number of elvers stock for pond area, size of tanks, feed and feed quantity, and the size and number of harvest eels. The production capacity of Jeollanam-do and Jeollabuk-do were 71.9% and 21.3% respectively. This production quantity represented 93.2% of the total Korean eel production quantity. In Jeollanam-do, there are 236 eel farms, 202 pond farms, and 34 recirculation aquaculture facilities. The elvers' first density data by each aquaculture method revealed that elvers' first density varied more in recirculation system farms, as compared to pond aquaculture. In intensive pond farms, the elvers' first density decreased as the size of farm increased. There was a correlation between the size of tank(x) and the facility of a water wheel for dissolved oxygen in pond culture systems(y=0.022x-0.494; $R^2$=0.860). Another strong correlation was found between the weight of eel(x) and eel density(y) in pond culture systems(y=283.5x-0.27; $R^2$=0.992). Finally, there was a strong correlation between the length of eel(x) and the weight of eel(y) in intensive pond culture(y=0.0005x-3.2783; $R^2$=0.9775). The final survival rate did not differ significantly among pond sizes and culture types.

Hematological Responses, Survival, and Respiratory Exchange in the Olive Flounder, Paralichthys olivaceus, during Starvation

  • Park, I.S.;Hur, J.W.;Choi, J.W.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제25권9호
    • /
    • pp.1276-1284
    • /
    • 2012
  • A 12-wk experiment was conducted to examine the hematological changes, survival, and respiratory exchange in the olive flounder, Paralichthys olivaceus, during starvation. The growth, survival and respiratory exchange rates of the starved group were lower than those of the fed group during the experiment. Blood analysis, including hematocrit, hemoglobin, red blood cells, mean corpuscular hemoglobin, mean corpuscular hemoglobin concentration, and mean corpuscular volume, did not differ significantly (p>0.05) between the fed and starved groups at the end of the experiment. There were no significant differences in plasma cortisol, glucose, $Na^+$, $Cl^-$, $K^+$, or aspartate aminotransferase between the fed and starved groups (p>0.05). Alanine aminotransferase levels were higher in the starved group than in the fed group, whereas plasma osmolality was lower in the starved group than in the fed group. It was shown that starved fish had various problems after four weeks, which did not occur in the fed group. Long-term starvation is infrequent in aquaculture farms. However, starvation studies of this kind are very useful for a basic understanding of how physiological changes affect fish health, life expectancy, and growth.

공기 분위기에서 스파크 방전을 이용한 은 나노입자 생성 (Generation of Silver Nanoparticles by Spark Discharge Aerosol Generator Using Air as a Carrier Gas)

  • 오현철;정재희;박형호;지준호;김상수
    • 대한기계학회논문집B
    • /
    • 제30권2호
    • /
    • pp.170-176
    • /
    • 2006
  • A spark discharge aerosol generator using air as a carrier gas has successfully been applied to silver nanoparticle production. The spark discharge between two silver electrodes, which was periodically obtained by discharging the capacitor, produced sufficient high temperatures to evaporate a small fraction of the silver electrodes. The silver vapor was subsequently supersaturated by rapid cooling and condensed to silver nanoparticles by nucleation and condensation. The morphology of the generated particles observed by transmission electron microscope was spherical. The element composition of the nanoparticles was silver, which was determined by energy dispersive X-ray spectroscopy. The crystal phase of the particles spark-generated under air atmosphere was composed of silver and silver oxides phase, which was determined by Xray diffraction analysis. While the nanoparticles generated under nitrogen atmosphere had only silver phase. This XRD data indicates that some fraction of the evaporated silver vapor could be oxidized in air atmosphere by the reaction with oxygen. A stable operation of the spark discharge generator has been achieved. The size and concentration of the particles can be easily controlled by altering the repetition frequency, capacitance, gap distance and flow rate of the spark discharge system.

SYNTHESIS OF NANO-SIZED IRON FOR REDUCTIVE DECHLORINATION. 1. Comparison of Aerobic vs. Anaeriobic Synthesis and Characterization of Nanoparticles

  • Song, Ho-Cheol;Carraway, Elizabeth R.;Kim, Young-Hun
    • Environmental Engineering Research
    • /
    • 제10권4호
    • /
    • pp.165-173
    • /
    • 2005
  • Nano-sized iron particles were synthesized by reduction of $Fe^{3+}$ in aqueous solution under two reaction conditions, aerobic and anaerobic, and the reactivity of iron was tested by reaction with trichloroethene (TCE) using a batch system. Results showed that iron produced under anoxic condition for both synthesis and drying steps gave rise to iron with higher reduction reactivity, indicating the presence of oxygen is not favorable for production of nano-sized iron deemed to accomplish reactivity enhancement from particle sized reduction. Nano-sized iron sample obtained from the anoxic synthesis condition was further characterized using various instrumental measurements to identity particle morphology, composition, surface area, and particle size distribution. The scanning electron microscopic (SEM) image showed that synthesized particles were uniform, spherical particles (< 100 nm), and aggregated into various chain structures. The effects of other synthesis conditions such as solution pH, initial $Fe^{3+}$ concentration, and reductant injection rate on the reactivity of nano-sized iron, along with standardization of the synthesis protocol, are presented in the companion paper.

Potency of Botryococcus braunii cultivated on palm oil mill effluent wastewater as a source of biofuel

  • Azimatun Nur, Muhamad Maulana;Setyoningrum, Tutik Muji;Budiaman, I Gusti Suinarcana
    • Environmental Engineering Research
    • /
    • 제22권4호
    • /
    • pp.417-425
    • /
    • 2017
  • Indonesia is known as the largest oil palm producer in the world. However, along with the production, it generates wastes and pollution that caused the environmental problem in surrounding areas. Previous researchers reported that the high palm oil mill effluent (POME) concentration inhibited microalgae growth. However, the inhibition factor was not clearly explained by using kinetic model. This study presents kinetic models of Botryococcus braunii (B. braunii) cultivated on POME wastewater under different turbidity condition. Results showed that the growth model of Zwietering was closely suitable with experimental results. It was found that B. braunii was able to consume organic carbon from the POME wastewater on the logarithmic model. A modified kinetic model of Monod Haldane described the influence of turbidity and chemical oxygen demand on the cultivation. Turbidity of POME medium inhibited the growth rate at KI 3.578 and KII 179.472 NTU, respectively. The Lipid (39.9%), and carbohydrate (41.03%) were found in the biomass that could be utilized as biofuel source.

Resource recovery and harmless treatment of waste oil-in-water drilling fluid

  • Tang, Chao;Xie, Shui Xiang
    • Environmental Engineering Research
    • /
    • 제22권3호
    • /
    • pp.277-280
    • /
    • 2017
  • Destablization and demulsification is a difficult task for the treatment of waste oil-in-water drilling fluid because of its "three-high" characteristics: emulsification, stabilization and oiliness. At present, China is short for effective treating technology, which restricts cleaner production in oilfield. This paper focused on technical difficulties of waste oil-in-water drilling fluid treatment in JiDong oilfield of China, adopting physical-chemical collaboration demulsification technology to deal with waste oil-in-water drilling fluid. After oil-water-solid three-phase separation, the oil recovery rate is up to 90% and the recycled oil can be reused for preparation of new drilling fluid. Meanwhile, harmless treatment of wastewater and sludge from waste oil-in-water drilling fluid after oil recycling was studied. The results showed that wastewater after treated was clean, contents of chemical oxygen demand and oil decreased from 993 mg/L and 21,800 mg/L to 89 mg/L and 3.6 mg/L respectively, which can meet the requirements of grade one of "The National Integrated Wastewater Discharge Standard" (GB8978); The pollutants in the sludge after harmless treatment are decreased below the national standard, which achieved the goal of resource recovery and harmless treatment on waste oil-in-water drilling fluid.

The effect of the modification methods on the catalytic performance of activated carbon supported CuO-ZnO catalysts

  • Duan, Huamei;Yang, Yunxia;Patel, Jim;Burke, Nick;Zhai, Yuchun;Webley, Paul A.;Chen, Dengfu;Long, Mujun
    • Carbon letters
    • /
    • 제25권
    • /
    • pp.33-42
    • /
    • 2018
  • Activated carbon (AC) was modified by ammonium persulphate or nitric acid, respectively. AC and the modified materials were used as catalyst supports. The oxygen groups were introduced in the supports during the modifications. All the supports were characterized by $N_2$-physisorption, Raman, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and thermogravimetric analysis. Methanol synthesis catalysts were prepared through wet impregnation of copper nitrate and zinc nitrate on the supports followed by thermal decomposition. These catalysts were measured by the means of $N_2$-physisorption, X-ray diffraction, XPS, temperature programmed reduction and TEM tests. The catalytic performances of the prepared catalysts were compared with a commercial catalyst (CZA) in this work. The results showed that the methanol production rate of AC-CZ ($23mmol-CH_3OH/(g-Cu{\cdot}h)$) was higher, on Cu loading basis, than that of CZA ($9mmol-CH_3OH/(g-Cu{\cdot}h)$). We also found that the modification methods produced strong metal-support interactions leading to poor catalytic performance. AC without any modification can prompt the catalytic performance of the resulted catalyst.