• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 춘계 총회 및 학술발표회
• /
• pp.35-41
• /
• 2002

Dense oxygen ionic conducting materials can be used for oxygen separation membranes at high temperatures. However, they show relatively low permeation flux because of their large resistances. To reduce resistances and improve the oxygen permeation flux, thin dense yttria-stabilized-zirconia (YSZ)/Pd composite dual-phase membranes were fabricated by a new approach that combines the reservoir method and chemical vapor deposition (CVD). A thin porous YSZ layer was coated on a porous alumina support by dip-coating the YSZ suspension. A continuous Pd phase was formed inside pores of the YSZ layer by the reservoir method. The residual pores of the YSZ/Pd layer were plugged with yttria/zirconia by CVD to ensure the gas tightness of the membranes. The oxygen permeation fluxes through these composite membrane were 2.0$\times$10$^{-8}$ mol/cm$^2$.s and 4.8$\times$10$^{-8}$ mol/cm$^2$.s at 105$0^{\circ}C$ when air and oxygen were used as the permeate gases, respectively. These oxygen permeation values are about 1 order of magnitude higher than those of pure YSZ membranes prepared under similar conditions.

• 한국세라믹학회지
• /
• 제38권9호
• /
• pp.787-793
• /
• 2001

고상 반응법으로 제조된 $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ 분리막의 소결거동을 살펴보고, 분리막 양면에 산소농도의 차이를 부여하여 산소투과량을 측정하였다. 최적 소결조건에서 제조된 상대밀도 98%의 치밀한 분리막 자체의 산소공공을 통한 혼합전도에 기인해 750$^{\circ}$C∼950$^{\circ}$C의 온도구간에서 산소가 투과되었으며, 850$^{\circ}$C에서 약 0.1ml/$cm^2{\cdot}$min의 투과량을 나타내었다. 안정한 산소 투과량에 도달하기 위해서는 산소투입 후 일정한 시간이 요구되었고, 이러한 산소투과량은 산소부분압의 조절로 제어가 가능하였다.

• 한국세라믹학회지
• /
• 제56권2호
• /
• pp.197-204
• /
• 2019

An electrochemical oxygen permeating membrane (OPM) is fabricated using Zr_0.895Sc_0.095Ce_0.005Gd_0.005O_2-δ (ScCeGdZ) as the solid electrolyte and aLa_0.7Sr_0.3MnO₃-bScCeGdZ composite (LZab, electrode) as the electrode. The crystal phase of the electrode and the microstructure of the membrane is investigated with X-ray diffraction and scanning electron microscopy. The electrochemical resistance of the membrane is examined using 2-p ac impedance spectroscopy, and LZ55 shows the lowest electrode resistance among LZ82, LZ55 and LZ37. The oxygen permeation is studied with an oxygen permeation cell with a zirconia oxygen sensor. The oxygen flux of the OPM with LZ55 is nearly consistent with the theoretical value calculated from Faraday's Law below a critical current. However, it becomes saturated above the critical current due to the limit of the oxygen ionic conduction of the OPM. The OPM with LZ55 has a very high oxygen permeation flux of ~ 3.5 × 10^-6 mol/㎠s in I = 1.4 A/㎠.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.83-90
• /
• 1999

A cellulose acetate membrane containing silver nitrate was prepared by gelatinizing in water at $2^{\circ}C$ after evaporating solvent from the casting solution on a glass plate. Permeation experiments for oxygen and nitrogen were conducted in the ranges of temperature, $5-40^{\circ}C$ and pressure difference, $1-5kg/cm^2$ in order to investigate the effects of temperature and pressure difference on permeation characteristics of the membrane. When the evaporation time was increased, the permeability of oxygen decreased but the separation factor of oxygen against nitrogen increased since a more dense layer was formed on the membrane surface. When the silver nitrate was added, the permeation flux was doubled and the separation factor was improved from 3.0 to 3.3. This implies that silver nitrate acts as an oxygen carrier in the membrane.

• 멤브레인
• /
• 제9권1호
• /
• pp.43-50
• /
• 1999

폴리설폰 중공사막에 대한 산소와 질소의 투과도에 미치는 수분의 영향에 대한 실험을 수행하였다. 상대습도가 증가할수록 수분을 함유한 산소와 질소의 투과도는 감소하였따. 공급압력 3 kgf/$cm^2$와 온도 3$0^{\circ}C$에서, 상대습도 100% 인 산소의 투과도는 건조산소의 투과도보다 20%만큼 감소하였으며, 질소는 14%만틈 감소하였다. 수분을 gkadmb한 산소의 투과도는 운전시간이 경과함에 따라 단조하게 감소하여 정상상태에 도달하였다. 그러나, 질소의 투과도는 일시적으로 증가하였다가 감소하여 정상상태에 도달하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.94-97
• /
• 2004

Micro/nano-sized L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ particles are considered to improve oxygen permeability in highly selective inorganic oxygen separation membrane. A L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membrane with perovskite structure is fabricated by a conventional solid-state reaction. As the oxygen permeation flux of the L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membrane was lower than commercial gas separation membranes, we coated the L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ particles to enhance the oxygen permeation flux. It has been demonstrated that the effective area of reactive free surface is an important factor in determining the effectiveness of the introduction of coating layer for oxygen permeation. The introduction of micro/nano L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ particles was very effective for increasing oxygen flux, as the flux was as much as 2 to 6 times higher than that of an uncoated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membrane.\delta$/ membrane.>/ membrane.brane.

• KSBB Journal
• /
• 제9권5호
• /
• pp.492-498
• /
• 1994

설관막 장치를 이용하여 대장균의 투석배양을 수 행했다. 투석액으로 배지 내의 초산을 제거함으로써 초산의 저해효과를 경감할 수 있었다. 초산 생성속도는 포도당과 용존산소농도에 대단히 민감하였고, 따라서 막을 통한 포도당의 투과속도는 산소공급속도와 균형을 유지해야 했다. 막을 통해 포도당이 천 천히 공급될 때, 대장균의 비성장속도는 포도당 투 과속도에 좌우되었고 초산의 생성은 억제되였다.

• 멤브레인
• /
• 제22권2호
• /
• pp.113-119
• /
• 2012

$YBaCo_2O_{5+{\delta}}$조성의 산화물을 고상반응법을 이용하여 합성하였으며, 합성된 분말은 압축 성형 후 $1,180^{\circ}C$에서 소결하여 치밀한 분리막을 제조하였다. $YBaCo_2O_{5+{\delta}}$ 분리막은 X-선 회절분석기(XRD)와 전자 주사 현미경(SEM)을 이용하여 분석하였다. XRD 분석결과 $1,150^{\circ}C$ 이상에서 다른 불순물 없이 이중층 페롭스카이트 구조가 얻어졌다. 산소투과량은 분리막 양면에 산소분압 차이에 따라 $750{\sim}950^{\circ}C$ 온도범위에서 측정하였다. 산소투과량은 온도와 산소분압이 증가할수록 증가하였고, 두께 1.0 mm의 $YBaCo_2O_{5+{\delta}}$ 분리막은 $950^{\circ}C$, $PO_2$ = 0.42 atm에서 약 0.15 mL/$cm^2{\cdot}min$의 최대 투과량을 보였다. 산소투과에 대한 활성화 에너지는 산소 분압이 감소할수록 감소하였고 $PO_2$ = 0.21 atm의 조건에서 76.0 kJ/mol이었다.

• Journal of Electrochemical Science and Technology
• /
• 제9권3호
• /
• pp.212-219
• /
• 2018

Perovskite type ceramic membranes which exhibit dual ion conduction (proton and oxygen ion conduction) can permeate water and can aid solving operational problems such as temperature gradient and carbon deposition associated with a working solid oxide fuel cell. From this point of view, it is crucial to reveal water transport mechanism and especially the nature of the surface sites that is necessary for water incorporation and evolution. $BaCe_{0.8}Y_{0.2}O_{3-{\alpha}}$ (BCY20) was used as a model proton and oxygen ion conducting membrane in this work. Four different catalytically modified membrane configurations were used for the investigations and water flux was measured as a function of temperature. In addition, CO was introduced to the permeate side in order to test the stability of membrane against water and $CO/CO_2$ and post operation analysis of used membranes were carried out. The results revealed that water incorporation occurs on any exposed electrolyte surface. However, the magnitude of water permeation changes depending on which membrane surface is catalytically modified. The platinum increases the water flux on the feed side whilst it decreases the flux on the permeate side. Water flux measurements suggest that platinum can block water permeation on the permeate side by reducing the access to the lattice oxygen in the surface layer.

• 한국산업융합학회 논문집
• /
• 제4권1호
• /
• pp.77-85
• /
• 2001

This paper was to investigate the preparation of polysulfone(PS), polyethersulfone(PES) and polyphenylsulfone(PPS) membrane. The thermal property of PPS was higher than that of others. From the result of SEM, the concentration of polymer was found to have a significant effect on the structure of membrane, and the structure of membrane made of PES is found to have regular micell form of asymmetry. Permeability and selectivity for oxygen and nitrogen gas in the air were analyzed by GC. Permeabilities of the membrane made of PES for oxygen and nitrogen in air, 1.5 and $0.7(x10^9[cm^3(STP)cm/cm^2seccmHg]) $, respectively was higher than that of others. and Selectivity of the membrane made of PPS for oxygen to nitrogen gas in air was 2.9.