• The Korean Journal of Food And Nutrition
• /
• v.30 no.1
• /
• pp.139-147
• /
• 2017

The objective of this study was to develop anti-browning agents for commercial ready-to-eat pear products, which are preferred not only to maintain the flavor, color and texture of pears, but also to increase consumers' preference. The sliced 'Shin-go (Niitaka)' pears were immersed in 5% and 10% oxidized starch, 1% citric acid, and 5% and 10% oxidized starch with addition of 0.1% sucralose for 3 minutes, and then they were packaged in vacuum sealed bags at $1^{\circ}C$ for 9 days. In order to evaluate the quality of packaged sliced pears, the quality index was determined in terms of color, firmness, soluble solids, and sensory quality. With the passage of storage time, no specific variation in firmness and soluble solids was observed. However, the ${\Delta}E$ value of the sliced pears treated with 5% oxidized starch solution was significantly lower than that of the other pears. Also, the Hunter L and b values of the sliced pears treated with 5% oxidized starch solution remained nearly constant from the beginning of storage. This observation shows that 5% oxidized starch solution was effective in reducing surface browning of sliced pears. Moreover, sliced pears treated with oxidized starch solution with addition of 0.1% sucralose were given an overall liking score which was slightly higher than that given to the other pears because of the sweetness of sucralose. In conclusion, 5% oxidized starch solution with addition of 0.1% sucralose was effective in reducing browning of sliced pears and in improving the taste of sliced pears.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.1-8
• /
• 2013

High loading of printing and writing grades with fillers has many advantageous aspects in papermaking because it allows decreasing fiber use and reducing manufacturing cost. High loading technology, however, has some disadvantageous aspects as well. It decreases physical properties of papers, especially strength properties. The problem associated with high loading can be reduced by applying surface sizing starch solution onto paper surface. It is important to control the penetration of the surface sizing starch solution into paper web to obtain the desired property improvement. In this study, the effect of the addition of two polymers into starch solution on paper properties has been examined. PVOH and polyDADMAC were used as polymeric additives for surface sizing with oxidized starch. Viscosity of starch solutions and surface roughness of dried starch films on glass slides showed that some interactions between polymeric additives and oxidized starch have been occurred and the most extensive interaction with starch solution was obtained with high molecular weight polyDADMAC. Low molecular weight PVOH was most effective in improving folding endurance and internal bond strength. On the other hand, polymer addition showed no effect on surface strength of paper. This indicates that not the level of starch holdout but the bonding strength of starch itself has predominant influence on surface strength of paper.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.42-48
• /
• 1998

Physicochemical properties of waxy maize starch and oxidized waxy maize starch with sodium hypochlorite $(0{\sim}60\;mg\;CL_2/g\;starch,40^{\circ}C,\;pH\;10,\;3.0\;hr)$ were studied. As sodium hypochlorite concentration was increased, the content of crude lipid and crude protein of the oxidized starch were decreased. And crude protein content and whiteness was considered to show negative regression. However, the crude ash content of the oxidized starch increased significantly with oxidation and bore a positive regression to the chlorine content. There was a progressive increase in the carboxyl content with increasing oxidant level. After pasting in hot water and cooling, viscosity of the oxidized starches were drastically lower than that of native starch . As carboxyl contents of the oxidized starch increased, the solubility and swelling power was increased. When waxy maize starch treated with 0, 1.5, 3.0 and 6.0% sodium hypochlorite, temperature of initial gelatinization of oxidized starch was shown to 65, 65, 60 and $50^{\circ}C$, respectively. The oxidized waxy maize starches also form clearer pastes. Water binding capacity of the oxidized starch decreased as the degree of carboxyl group substitution increased. Waxy maize starch has polygonal and some round granules which range from about 3.7 to $20\;{\mu}m$ in diameter. Surface appearance of the waxy maize starch became rough when oxidized with sodium hypochlorite. When homogenate of the oxidized waxy maize starch solution and corn germ oil was stored under room temperature for 24 hours, the emulsion stability was considered to depend on starch concentration and degree of substitution.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.245-250
• /
• 2006

This study was focused on the use of cationic PAM (Polyacrylamide) as a surface sizing additive to improve the surface sizing properties of paper. Effects of the ionic property, viscosity and charge density of PAM on bending stiffness of surface sized papers were investigated. Use of cationic PAM as a surface sizing additive improved bending stiffness while addition of anionic PAM did not show any effect. Increase of starch holdout with the addition of cationic PAM was attributed as a prime reason of stiffness increase. Viscosity of PAM was one of the most important factors affecting surface sizing due to its influence on the interaction between cationic PAM and oxidized starch solution. Greater improvement of bending stiffness of paper was obtained when high charged PAM was used as an additive. The order of addition was found to have significant influence on the effect of additives since it influences the formation of network structure among starch, cationic PAM, and SA (styrene acrylic acid copolymer). Investigation on the penetration of starch solution was carried out with CLSM (Confocal Laser Scanning Microscopy), and it was shown that the addition of cationic PAM to oxidized starch solution made starch molecules stay on the paper surface rather than penetrating into the paper structure because of the electrostatic interaction between negatively charged fibers and positively charged cationic PAM.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.54-62
• /
• 2012

The main role of surface sizing of linerboard is to improve surface and strength properties. Since surface sizing solution is applied on once dried web, substantial amount of drying energy is required. Saving of the drying energy associated with surface sizing can be made by increasing the solids content of the starch solution in size press. Therefore, it is highly desirable to develop low viscosity starches for surface sizing. A low viscosity oxidized starch was prepared and compared its effect of surface sizing with a conventional oxidised starch. Results showed increase in solids content of the starch solution decreased evaporation energy and drying time. Low viscosity starch penetrated deeper into paper and this improve various mechanical properties of linerboard.

• KSBB Journal
• /
• v.16 no.2
• /
• pp.128-132
• /
• 2001

Cyclodextrin glucanotransferase (EC 2.4.1.19 : 1,4-$alpha$-glucan 4-$alpha$-D-(1,4-glucano) transferase, cyclizing; CGTase) was recovered by starch adsorption. The adsorption and desorption of CGTase to starch was studied as a function of pH, temperature, and starch type. The optimal pH, temperature, and starch for adsorption were, 8.0, $4^{circ}C$, and 1% (w/v) corn starch, respectively, per 205 U/mL enzyme activity in the presence of 25% (w/v) ammonium sulfate. The maximum adsorption ratio was 95%. On the other hand, the optimal pH, temperature, and starch type for desorption were 8.0 (tris-buffer), $50^{circ}C$, and oxidized starch, respectively. The maximum desorption ratio was 98% by tris-buffer solution at pH 8.0. The efficiency of adsorption and desorption were affected slightly by the removal of cells from the fermentation broth.