• 제목/요약/키워드: oxide particle dispersion

검색결과 44건 처리시간 0.019초

졸겔법으로 제작된 Al-doped ZnO 박막의 Aluminum Chloride 농도에 따른 구조적 및 광학적 특성 (Effects of Aluminum Chloride Concentrations on Structural and Optical Properties of Al-doped ZnO Thin Films Prepared by the Sol-Gel Method)

  • 조관식;김민수;임광국;이재용;임재영
    • 대한금속재료학회지
    • /
    • 제50권11호
    • /
    • pp.847-854
    • /
    • 2012
  • Al-doped ZnO (AZO) thin films were grown on quartz substrates by the sol-gel method. The effects of the Al mole fraction on the structural and optical properties of the AZO thin films were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), and UV-VIS spectroscopy. The particle size of the AZO thin films decreased with an increase in Al concentrations. The optical parameters, the optical band gap, absorption coefficient, refractive index, dispersion parameter, and optical conductivity, were studied in order to investigate the effects of Al concentration on the optical properties of AZO thin films. The dispersion energy, single-oscillator energy, average oscillator wavelength, average oscillator strength, and refractive index at an infinite wavelength of the AZO thin films were affected by the Al incorporation. The optical conductivity of the AZO thin films also increased with increasing photon energy.

아산화동과 황산간의 고속 화학반응에 의한 미세 Cu 입자의 합성과 삼본밀에 의한 분산성 개선 (Synthesis of Cu Nanoparticles through a High-Speed Chemical Reaction between Cuprous Oxide and Sulfuric Acid and Enhancement of Dispersion by 3-Roll Milling)

  • 오상주;이종현;현창용
    • 마이크로전자및패키징학회지
    • /
    • 제23권4호
    • /
    • pp.125-133
    • /
    • 2016
  • 도전 페이스트의 필러로 사용되기 위한 미세 Cu 입자를 제조하기 위하여 아산화동 분말과 황산간의 고속 화학 반응을 이용한 증류수 기반의 습식 공정으로 Cu 입자의 합성을 실시하였다. $7^{\circ}C$에서 48%의 황산과 30 g의 $Cu_2O$를 사용한 조건에서 미반응 $Cu_2O$ 입자들이 제거되면서 입자들간의 응집이 개선된 순수 Cu 나노입자들이 제조되었다. 이후 최적 첨가제의 선택을 통하여 입자들간의 응집이 가장 억제된 224 nm 크기의 Cu 입자들을 제조할 수 있었다. 이러한 미세 Cu 입자 시료에서는 응집된 형태의 조대 입자들이 다소 존재하였고 입자들간의 연결부도 일부 관찰되었으나, 삼본밀을 사용한 레진 포물레이션과의 혼합 후에는 응집된 형태의 조대 입자들이 파괴되고 입자들간의 연결부들이 탈착되어 입자들의 응집이 풀리는 거동을 관찰할 수 있었다.

염료감응형 태양전지용 질산 전처리된 $TiO_2$ 광전극의 전기화학적 특성 (Electrochemical Properties of HNO3 Pre-treated $TiO_2$ Photoelectrode for Dye-SEnsitized Solar Cells)

  • 박경희;김은미;구할본
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.441-441
    • /
    • 2009
  • Dye-sensitized solar cells (DSSCs) have been widely investigated as a next-generation solar cell because of their simple fabrication process and low coats. The cells use a porous nanocrystalline TiO2 matrix coated with a sensitizer dye that acts as the light-harvesting element. The photo-exited dye injects electrons into the $TiO_2$ particles, and the oxide dye reacts with I- in the electrolyte in regenerative cycle that is completed by the reduction of $I_3^-$ at a platinum-coated counter electrode. Since $TiO_2$ porous film plays a key role in the enhancement of photoelectric conversion efficiency of DSSC, many scientists focus their researches on it. Especially, a high light-to-electricity conversion efficiency results from particle size and crystallographic phase, film porosity, surface structure, charge and surface area to volume ratio of porous $TiO_2$ electrodes, on which the dye can be sufficiently adsorbed. Effective treatment of the photoanode is important to improve DSSC performance. In this paper, to obtain properties of surface and dispersion as nitric acid treated $TiO_2$ photoelectrode was investigate. The photovoltaic characteristics of DSSCs based the electrode fabricated by nitric acid pre-treatment $TiO_2$ materials gave better performances on both of short circuit current density and open circuit voltage. We compare dispersion of $TiO_2$ nanoparticles before and after nitric acid treatment and measured Ti oxidized state from XPS. Low charge transfer resistance was obtained in nitric acid treated sample than that of untreated sample. The dye-sensitized solar cell based on the nitric acid treatment had open-circuit voltage of 0.71 V, a short-circuit current of 15.2 mAcm-2 and an energy conversion efficiency of 6.6 % under light intensity of $100\;mWcm^{-2}$. About 14 % increases in efficiency obtained when the $TiO_2$ electrode was treated by nitric acid.

  • PDF

초임계 유체를 이용한 난용성 약물의 고체분산체 제조 (Preparation of Solid Dispersions of a Poorly Water-soluble Drug Using Supercritical Fluid)

  • 김석윤;이정민;정인일;임교빈;유종훈
    • KSBB Journal
    • /
    • 제24권6호
    • /
    • pp.533-540
    • /
    • 2009
  • 본 연구에서는 난용성 약물인 5'-NIO의 가용화를 위해 초임계 유체 ASES 공정을 이용하여 PVP K-30과의 고체분산체를 제조하고 첨가제인 P188의 영향에 대해 고찰하였다. FE-SEM을 이용하여 초임계 유체 공정으로 제조된 고체분산체 미립자의 형상을 분석한 결과 100-200 nm 크기의 나노입자들이 응집된 형태를 나타내었으며, P188의 함량이 증가함에 따라 입자간의 응집이 증가하여 덩어리 형태로 전환되는 것을 확인할 수 있었다. XRD 분석 결과 5'-NIO 결정피크가 사라진 것을 확인하였으며, 이는 5'-NIO가 고분자 매질내에 분자 또는 나노 크기 수준으로 분산되었음을 의미한다. 또한 FT-IR 분석 결과 5'-NIO와 PVP K-30간에 수소결합과 같은 상호작용이 존재함을 학인할 수 있었다. 5'-NIO/PVP K-30 2성분계 고체분산체에 비이온성 계면활성제를 첨가한 경우 용출률이 현저히 향상되었으나, P188의 함량이 매우 큰 경우에는 오히려 용출률이 감소한 다는 것을 확인하였다. 본 연구를 통해 초임계 유체 공정이 기존의 고체분산체 제조 방법을 충분히 대체할 수 있다는 가능성을 확인할 수 있었다.