• Journal of the Korean institute of surface engineering
• /
• v.29 no.4
• /
• pp.238-252
• /
• 1996

In order to study the effect of interface oxides on the adhesion strength of the copper/epoxy system, copper foils were immersed in black oxide or brown oxide forming solutions before lamination with epoxy prepregs, and variation of peel strength with the treatment time were investigated. Results showed that peel strength decreased rapidly up to 1 minute of treatment lime and remained constant in the case of the black oxide treated specimens, which was accompanied by the thickening of $Cu_2O$ at the Copper/Epoxy interface during the period. In contrast, peel strength increased rapidly up to 1 minute of treatment time and remained constant in the case of the brown oxide treated specimens, which could be ascribed to the thickening of CuO. Subsequent heat treatments of the Copper/Epoxy laminations at $120^{\circ}C$ in air showed that peel strength remained constant in the case of the black oxide treated specimens but decreased gradually in the case of the brown oxide treated specimens. Following XPS analyses revealed that the latter was possibly caused by the coalescence of CuO at the Copper/Epoxy interface into $Cu_2O$.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.3
• /
• pp.149-157
• /
• 2002

Spectral emissivity depends on the surface conditions of the materials. The mechanisms that affect the spectral emissivity in anodic oxide films on aluminum were investigated. The aluminum specimens were anodized in a sulfuric acid solution and the thickness of the resulting oxide film formed changed with the anodizing time. FT-IR spectrum analysis identified the anodic oxide film as boehmite ($Al_2$$O_3$.$H_2$O). Both the infrared emisivity and reflectivity of the anodized aluminum were affected by the structure of the anodic oxide film because Al-OH and Al-O-Al have a pronounced absorption band in the infrared region of the spectrum. The presence of an anodic oxide film on aluminum caused a rapid drop in the infrared reflectivity. An aluminum surface in the clean state had an emissivity of approximately 0.2. However, the infrared emissivity rapidly increased to 0.91 as the thickness of the anodic oxide film increased.

• Journal of Life Science
• /
• v.12 no.6
• /
• pp.765-768
• /
• 2002

Enantioselective hydrolysis of racemic styrene oxide by Rhodotorula sp. CL-82 was investigated. Reaction conditions including pH, temperature, and volume ratio of organic cosolvent were optimized using response surface methodology, and the optimal conditions of pH, temperature, and the volume ratio of cosolvent were determined to be 7.64, $33.26^{\circ}C$, and 3.09 %(v/v), respectively. Chiral (S)-phenyl oxirane could be obtained with high enantiomeric purity (ee ＞ 99%) and 20% yield (theoretical yield ＝ 50%) at the optimal rendition.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.18.2-18.2
• /
• 2011

We study and analyze here a novel and simple approach to produce copper oxide nanowires in a methanol as an alternative to chemical synthesis routs and VLS-growth method. First, copper oxide nanowires are grown from copper nanoparticles in methanol at $60^{\circ}C$. Nanoparticles are synthesized via inert gas condensation, one of the dry processes. Synthesized nanowires were confirmed via XRD, FESEM and TEM. As a result, all particles have grown to Cu2O nanowires (20~30 nm in diameter, 5~10 um in length; aspect ratio >160~500). Next, these synthesized oxide nanowires are reduced copper nanowires in the furnace under hydrogen flow at $200{\sim}450^{\circ}C$. The evolution of oxide nanowires and their transformation to copper nanowires is studied as a function of time.

• Journal of the Korean Ceramic Society
• /
• v.13 no.2
• /
• pp.8-16
• /
• 1976

The conductive transparent film is prepared by spraying thin salt solution. In stannic chloride solution as a base solution, various dopants such as Al, Co, Cu and Ni were dissolved respectively as a chloride state and then the films were made by spraying solutions on hot glass plates. The properties of them were compared with those of the stannic salt single component film. The films doped with copper oxide and nickle oxide were improved by decreasing their sheet resistivity and temperature coefficient of resistivity. In comparison with the sheet resistivity and temperature coefficient of resistivity of stannic oxide single component film, being 2.5 K ohm/$\textrm{cm}^2$ and -1650ppm/$^{\circ}C$ respectively, its values of the film containing 15 mol % of copper oxide and formed at 40$0^{\circ}C$ were 2.5K ohm/$\textrm{cm}^2$ and -920ppm/$^{\circ}C$ respectively. The film containing 15 mol % of nickel oxide and formed at 50$0^{\circ}C$ has shown its sheet resistivity and temperature coefficient 0.7 K ohm/$\textrm{cm}^2$ and -940ppm/$^{\circ}C$ respectively.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.1
• /
• pp.35-40
• /
• 1997

A new method to form the gate oxide and recrystllize the polycrystalline silicon (poly-Si) active layer simultaneously is proposed and fabricated successfully. During te irradiation of excimer laser, the poly-Si film is recrystallized, while the oxygen ion impurities injected into the amorphous silicon(a-Si) film are activated by laser energy and react with silicon atoms to form SiO2. We investigated the characteristics of the sample fabricated by proposed method using AES, TEM, AFM. The electrical performance of oxide was verified by ramp up voltage method. Our experimental results show that a high quality oxide, a pol-Si film with fine grain, and a smooth and clean interface between oxide and poly-Si film have been successfully obtained by the proposed fabrication method. The interface roughness of oxide/poly-Si fabricated by new method is superior to film by conventional fabrication os that the proposed method may improve the performance of poly-Si TFTs.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.215-215
• /
• 2003

현재 이용되고 있는 위상 변위 마스크, 즉 Cr 계열의 마스크나 MoSiON 마스크는 DUV지역에서 낮은 굴절률을 갖는다. 그 겯과 마스크의 두께가 90 nm 이상이 되고, 웨이퍼에서 패턴 형성 시 에러율이 증가하게 된다. 본 연구에서는 DUV 지역에서 굴절률이 높을 것이라고 예상되는 Zr과 Hf의 oxide를 위상 변위 마스크 물질의 선정하고 각 물질의 전자 상태와 천이 상태를 분석하여 위상변위 마스크로써의 이용가능성을 연구하자 한다. 상온에서 Zr, Hf oxide의 안정한 구조는 cubic 구조와 monoclinic 구조이다. 현재 cubic 구조의 Zr, Hf oxide에 대한 전자 상태는 연구가 많이 되어 있는 반면 monoclinic 구조에서의 전자상태 연구는 미흡하다. 본 연구에서는 monoclinic 구조를 이용하여 Zr, Hf oxide의 클러스터 모델을 제작하였다. 제작된 클러스터 모델에 대하여 DV-X$\alpha$ 계산법을 적용, 기저상태의 전자상태를 계산하였다. 그리고 각 모델에서 Zr L-edge, Hf L-edge 그리고 O K-edge의 천이상태를 연구하여, 기저 상태의 전자상태와 천이상태를 연구하여 광학 성질과의 연관성을 연구하고자 하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.221.2-221.2
• /
• 2011

In this study, we prepared the magnesium oxide decorated ordered mesoporous carbons processed by the reduction of magnesium oxide precursor on the CMK-3 surfaces in order to investigate the characterization and the effect on their carbon dioxide adsorption behaviors. The magnesium contents of the prepared samples were characterized using XPS. The textural properties of the prepared samples were investigated by $N_2$/77 K adsorption isotherms by BET equation. The carbon dioxide adsorption capacities of the prepared samples were investigated by the amounts of carbon dioxide adsorptions at 298 K and 1.0 atm. The results showed that the magnesium oxide on the CMK-3 surface enhanced interaction between carbon dioxide and adsorbents. Consequently, it was found that the magnesium oxide led to an increase in the carbon dioxide adsorption capacity of the CMK-3.

• Structural Monitoring and Maintenance
• /
• v.4 no.2
• /
• pp.107-113
• /
• 2017

In this paper, we present a strain-sensitive composite skin-like film made up of piezoresistive zinc oxide (ZnO) nanorods embedded in a flexible poly(dimethylsiloxane) substrate, with added reduced graphene oxide (rGO) to facilitate connections between the nanorod clusters and increase strain sensitivity. Preparation of the composite is described in detail. Cyclic strain sensing tests are conducted. Experiments indicate that the resulting ZnO-PDMS/rGO composite film is strain-sensitive and thus capable of sensing cycling strain accurately. As such, it has the potential to be molded on to a structure (civil, mechanical, aerospace, or biological) in order to provide a strain sensing skin.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.1
• /
• pp.81-93
• /
• 1998

For the purpose of preparation of monodispersed spherical zinc oxide fine particles, and experimental research on the preparation of zinc oxide particles from zinc salts solutions by high temperature precipitation reaction was performed. Zinc oxide particles were precipitated from all the precipitation solutions tested if the precipitation temperature was higher than 60$^{\circ}$C. As the precipitation temperature increased until 80$^{\circ}$C, the average particle diameter of zinc oxide particles decreased and the narrower particle size distribution were obtained. Spherical zinc oxide fine particles with relativeyl narrow particle size distribution were precipitated from the ZnSo4 solutions with NaOH as precipitant. Final pH of precipitation solution had an effect on the amount of zinc oxide precipitated, but had no effect on the their particle size or size distribution.