• Bulletin of the Korean Chemical Society
• /
• 제28권4호
• /
• pp.543-546
• /
• 2007

Herein, a new electrochemical method was described for the determination of ciprofloxacin based on the enhancement effect of an anionic surfactant: sodium dodecyl benzene sulfonate (SDBS). In pH 4.0 phosphate buffer and in the presence of 1.0 × 10-4 mol/L SDBS, ciprofloxacin yields a well-defined and sensitive oxidation peak at the carbon paste electrode (CPE). Compared with that in the absence of SDBS, the oxidation peak current of ciprofloxacin remarkably increases in the presence of SDBS. The experimental parameters, such as supporting electrolyte, concentration of SDBS, and accumulation time, were optimized for ciprofloxacin determination. The oxidation peak current is proportional to the concentration of ciprofloxacin over the range from 8.0 × 10-8 to 5.0 × 10-6 mol L-1. The detection limit is 2.0 × 10-8 mol L-1 after 2 min of accumulation. This new voltammetric method was successfully used to detect ciprofloxacin in drugs.

• 한국분말재료학회지
• /
• 제19권3호
• /
• pp.196-203
• /
• 2012

$TiO_2$ was successfully formed on a Ti specimen by MAO (Micro-Arc-Oxidation) method treated in $Na_3PO_4$ electrolyte. This study deals with the influence of voltage and working time on the change of surface microstructure and phase composition. Voltage affected the forming rate of the oxidized layer and surface microstructure where, a low voltage led to a high surface roughness, more holes and a thin oxidized layer. On the other hand, a high voltage led to more dense surface structure, wider surface holes, a thick layer and fewer holes. Higher voltage increases photocatalytic activity because of better crystallization of the oxidized layer and good phase composition with anatase and rutile $TiO_2$, which is able to effectively separate excited electrons and holes at the surface.

• 한국표면공학회지
• /
• 제30권5호
• /
• pp.320-332
• /
• 1997

The development of colored surface on zinc coating by the oxidation of a melten alloy of zinc with a minor amount of oxygen-avid additive such as tianium has been studied. Using a galvanizing Zinc alloy containing 0.1 to 0.3wt%Ti, gold, purple or blue color was developed clearly and stably, depending upon the extent of oxidation, by air cooling after hot dipping in a bath at temperature of $550^{\circ}C$ to $600^{\circ}C$. The source of the color is light interference with surface oxide layer. THe final color depends on the thickness of the color depends on the thickness of $TiO_2$, played So compositing, temperature and time at elevated temperature after are all controlling variables. Since oxidation film such as $TiO_2$ played role of passivation film, the corrosion resistance in a colored galvanized steel sheet. It is also thought that surface oxide layer of $TiO_2$ inhibited dissolution of the coating layer.

• 한국세라믹학회지
• /
• 제29권10호
• /
• pp.785-790
• /
• 1992

A study of the pack cemcented SiC coating on graphite was performed and the process conditions were evaluated by means of experimental design. The content of Si, P2O5, B and Al2O3 reaction temperature, reaction time and acid treatment wast tested as the experimental variables. The results were analyzed and compared by the characteristic value of 10% weight loss by oxidation. The acid treatment exhibited the most effective anti-oxidation property and the optimum conditions were the powder composition of 20% Si, 3% B and 77% SiC, the reaction temperature of 1550$^{\circ}C$ for 7 hours with phosphoric acid treatment. The pack coating performed under this condition improved the 10% weight loss oxidation temperature by 514$^{\circ}C$ compared to the bare graphite.

• Corrosion Science and Technology
• /
• 제8권6호
• /
• pp.227-231
• /
• 2009

Mg and Mg alloys have been used for lots of applications, including automobile industry, aerospace, mobile phone and computer parts owing to low density. However, Mg and Mg alloys have a restricted application because of poor corrosion properties. Thus, improved surface treatments are required to produce protective films that protect the substrate from corrosive environments. Environmental friendly Plasma Electrolytic Oxidation (PEO) has been widely investigated on magnesium alloys. PEO process combines electrochemical oxidation with plasma treatment in the aqueous solution. In this study, AZ91 Mg alloys were treated by PEO process in controlling the current with PC condition and treated time, concentration of NaF, NaOH, and $Na_2SiO_3$. The surface morphology and phase composition were analyzed using SEM, EDS and XRD. The potentiodynamic polarization tests were carried out for the analysis of corrosion properties of specimen. Additionally, salt spray tests were carried out to examine and compare the corrosion properties of the PEO treated Mg alloys.

• 한국환경보건학회지
• /
• 제34권4호
• /
• pp.333-341
• /
• 2008

In this study, the possibility and the optimal conditions for treating slurry type piggery wastewater using supercritical water oxidation were tested in the laboratory. The results could be summarized as follows; The slurry type piggery wastewater, which was diluted 50 times, was treated most effectively at the pressure of 300 bar, the temperature of $550^{\circ}C$ and the residence time of 10 minutes. The air saturated water was injected, as an oxidizing agent, and the removal efficiencies of $COD_{Cr}$, T-N, $NH_4^+$-N and T-Pattheoptimal conditions were 92, 40, 59 and 100%, respectively. Therefore, analte rnativemea suremu stbetaken to improve theremo valefficiency of the nitrogen compounds.

• 한국세라믹학회지
• /
• 제27권5호
• /
• pp.652-660
• /
• 1990

Oxidation of Mn-Zn ferrite was made in air at various temperatures ranging from 400$^{\circ}C$ to 1150$^{\circ}C$. Subsequent reduction fo these oxidized samples was also made in air at 1300-1350$^{\circ}C$ where the spinel phase of Mn-Zn ferrite is stable. Morphological observation revealed that the shape of precipitated hematite was plate or lath type on the close-packed habit plane of {111} ferrite which has a definite orientation relationship. The growth of precipitates showed the behavior fo parabolic dependence of the oxidating time. An apparent activation energy for the growth was found to be 125${\pm}$3Kcal/mol. The fact that pores are observed along the precipitates illustrates the oxidation to occur dominantly by the counterdiffusion of cations and ction vacancies. For the reductio reaction pores are found to form at the site once occupied by the precipitates and at the surface. This observation illustrates that the oxygen volitalization from interior region to the surface is the dominant process for the reduction reaction.

• 열처리공학회지
• /
• 제17권4호
• /
• pp.216-222
• /
• 2004

Study was focused on the quenching embrittlement property of Zircaloy-4 cladding simulated Loss Of Coolant Accident (LOCA) environment in terms of high temperature oxidation and phase transformation. Property in LOCA condition of advanced cladding that contained Nb element was also investigated. Claddings were oxidized at given temperature and given time followed by water quenching. The results showed that ${\beta}$ phase which formed at quenching stage has an influence on cladding property. In case of advanced cladding, Nb retards cladding oxidation, thus enhances quenching resistance.

• 한국식품영양과학회지
• /
• 제26권6호
• /
• pp.993-997
• /
• 1997

This study was carried out to investigate the antioxidative effect of different kinds of kimchi on the lipid oxidation of cooked meat in model systems. Model systems of cooked ground meat(CGM), CGM-Chinese cabbage kimchi(CK), CGM-radish kimchi(RK), and CGM-mustard leaf kimchi(MLK) were prepared and their oxidation were evaluated during the storage at 4$^{\circ}C$ for 5 weeks. Thiobarbituric acid(TBA) values of CGM significantly increased with the storage at 4$^{\circ}C$ for 5 weeks. Thiobarbituric acid(TBA) values of CGM significantly increased with the storage time, however, TBA value of CGM-CK, CGM-RK, and CGM-MLK lowered and that of CGM-MLK was lowest. Antioxidative effect of CGM-MLK increased with the addition levels of kimchi in the system. And also in the model systems which were prepared with CGM and MLK in different fermentation periods, the antioxidative effect was highest in the properly fermented-kimchi.

• Bulletin of the Korean Chemical Society
• /
• 제21권5호
• /
• pp.487-492
• /
• 2000

The combustion characteristics of a mixture of acetaldehyde, oxygen and argon behind a reflected shock wave at temperatures ranging from 1320 to 1897 K at 100 torr were studied. The emission from the OH radical at 306.4 nm and the pressure profile behind the reflected shock were measured to monitor ignition delay time. The ignition delay times were computed from a proposed mechanism of 110 elementary reactions involving 34 species. The simulation and sensitivity analysis confirm that the main channel for oxidation of acetaldehyde at high temperature consists of the Rice-herzfeld mechanism, the decomposition and oxidation of HCO, and the reaction of H with $O_2$.