• 한국재료학회지
• /
• 제20권4호
• /
• pp.217-222
• /
• 2010

Zirconium diboride (ZrB2) and mixed diboride of (Zr0.7Ta0.3)B2 containing 30 vol.% silicon carbide (SiC) composites were prepared by hot-pressing at $1800^{\circ}C$. XRD analysis identified the high crystalline metal diboride-SiC composites at $1800^{\circ}C$. The TaB2 addition to ZrB2-SiC showed a slight peak shift to a higher angle of 2-theta of ZrB2, which confirmed the presence of a homogeneous solid solution. Elastic modulus, hardness and fracture toughness were slightly increased by addition of TaB2. A volatility diagram was calculated to understand the oxidation behavior. Oxidation behavior was investigated at $1500^{\circ}C$ under ambient and low oxygen partial pressure (pO2~10-8 Pa). In an ambient environment, the TaB2 addition to the ZrB2-SiC improved the oxidation resistance over entire range of evaluated temperatures by formation of a less porous oxide layer beneath the surface SiO2. Exposure of metal boride-SiC at low pO2 resulted in active oxidation of SiC due to the high vapor pressure of SiO (g), and, as a result, it produced a porous surface layer. The depth variations of the oxidized layer were measured by SEM. In the ZrB2-SiC composite, the thickness of the reaction layer linearly increased as a function of time and showed active oxidation kinetics. The TaB2 addition to the ZrB2-SiC composite showed improved oxidation resistance with slight deviation from the linearity in depth variation.

• KSBB Journal
• /
• 제24권1호
• /
• pp.101-105
• /
• 2009

Alcohol oxidation activities and optimization of extraction conditions of Rrhus verniciflua Stokes (RVS) extract were evaluated for the development of a functional biomaterial for improving liver function. When alcohol oxidation activities of RVS was analyzed, the Rrhus verniciflua Stokes bark (RVSB) were higher than the Rrhus verniciflua Stokes heartwood (RVSH). Alcohol oxidation activity value of RVSB increased in a concentration-dependent manner. In the comparative analysis between Hovenia dulcis Thunb (HOT) and Alnus japonica Steud (AJS) which was reported as a alcohol oxidation material, alcohol oxidation activity is much higher than the others. The experimental conditions were optimized for alcohol oxidation-active components production from RVSB. The extraction conditions such as temperature, time, pH and particle size were performed. It was recommended to extract the alcohol oxidation-active components from RVSB by hot water (pH 7.0) at $85^{\circ}C$ for 8 hours.

• 전자공학회논문지D
• /
• 제34D권2호
• /
• pp.38-45
• /
• 1997

본 논문에서는 반도체 소자 제조 공정 중, 염산화 공정 시에 발생하는 스트레스에 따른 산화막의 3차원적 거동을 시뮬레이션하였다. 이를 위해, 이동하는 3차원 경계면에서의 노드 생성 및 제거 기능을 지는 3차원 적응 메쉬 생성기를 개발하였고, 지배 방정식을 유한요소법(finite element method)으로 이산화시켜 수치 해석적으로 해를 구하는, 스트레스 효과를 고려한 3차원 산화 시뮬레이터를 개발하였다. 본 연구에서는 열산화 공정에 의한 산화막의 3차원적 거동을 관찰하기 위하여, 섬구조(island) 및 공구조(hole structure)의 산화막 성장을 <100> 실리콘 기판에 대하여 $1000^{\circ}C$, 60분간 습식 산화 조건에서 시뮬레이션하였다. 초기 산화막의 두께는 $300\AA$, 질화막의 두께는 $2,000\AA$으로 가정하였다. 마스크의 형태에 따라 코너에서의 새부리(bird's beak)형태가 변하는데, 코너에서의 효과는 마스크 형태에 따라 산화제의 확산이 다른 영역에 비해 감소하거나 증가하는 영향이 주된 이유이지만, 스트레스에 의해 그 영향이 더 커짐을 확인하였다. 섬구조에서는 compressive 스트레스에 의해 코너 부근에서 산화가 감소하는 결과를 가져오고, 공구조에서는 tensile 스트레스로 인해 산화가 더 증가하는 결과를 보임을 확인하였다.

• 한국재료학회지
• /
• 제25권4호
• /
• pp.202-208
• /
• 2015

Alumina dispersion strengthening copper(ADSC) alloy has great potential for use in many industrial applications such as contact supports, frictional break parts, electrode materials for lead wires, and spot welding with relatively high strength and good conductivity. In this study, we investigated the oxidation behavior of ADSC alloys. These alloys were fabricated in forms of plate and round type samples by surface oxidation reaction using Cu-0.8Al, Cu-0.4Al-0.4Ti, and Cu-0.6Al-0.4Ti(wt%) alloys. The alloys were oxidized at $980^{\circ}C$ for 1 h, 2 h, and 4 h in ambient atmosphere. The microstructure was observed with an optical microscope(OM) and a scanning electron microscope(SEM) equipped with energy-dispersive X-ray spectroscopy(EDS). Characterization of alumina was carried out using a 200 kV field-emission transmission electron microscope(TEM). As a result, various oxides including Ti were formed in the oxidation layer, in addition to ${\gamma}$-alumina. The thickness of the oxidation layer increased with Ti addition to the Cu-Al alloy and with the oxidation time. The corrected diffusion equation for the plate and round type samples showed different oxidation layer thickness under the same conditions. Diffusion length of the round type specimen had a value higher than that of its plate counterpart because the oxygen concentration per unit area of the round type specimen was higher than that of the plate type specimen at the same diffusion depth.

• 대한기계학회논문집B
• /
• 제24권5호
• /
• pp.660-667
• /
• 2000

In order to investigate the exhaust structure and secondary oxidation of unburned hydrocarbon (HC) in the exhaust port, concentrations of individual HC species were measured in exhaust process, the degree of oxidation were obtained. Using a solenoid-driven fast sampling system on single-cylinder research engine fueled with 94% propane, the profiles of unburned hydrocarbons (HCs) and non-fuel HCs with a propane fueled engine were obtained from several locations in the exhaust port during the exhaust process. The sampled gases were analyzed using a gas chromatography of HC species with 4 or lesser carbon atoms. The change of total HC concentration and HC fractions of major components through the exhaust port were discussed. The results showed that non-uniform distribution of HC concentration existed around the exhaust valve and changed with time, and that the exhaust gas exhibited nearly uniform concentration profile at port exit, which was due to mixing and oxidation. Also it could be known that bulk gas with relatively high HC concentration came out through the bottom of the exhaust valve. To estimate the mass-based degree of HC oxidation in the exhaust port from measured HC concentrations, a 3-zone diagnostic cycle simulation and plug flow modeling were used. The degree of oxidation ranged between 26 % and 36 % corresponding to the engine operation conditions.

• Carbon letters
• /
• 제18권
• /
• pp.18-23
• /
• 2016

Polyacrylonitrile (PAN)-based carbon fibers have high specific strength, elastic modulus, thermal resistance, and thermal conductivity. Due to these properties, they have been increasingly widely used in various spheres including leisure, aviation, aerospace, military, and energy applications. However, if exposed to air at high temperatures, they are oxidized, thus weakening the properties of carbon fibers and carbon composite materials. As such, it is important to understand the oxidation reactions of carbon fibers, which are often used as a reinforcement for composite materials. PAN-based carbon fibers T300 and T700 were isothermally oxidized in air, and microstructural changes caused by oxidation reactions were examined. The results showed a decrease in the rate of oxidation with increasing burn-off for both T300 and T700 fibers. The rate of oxidation of T300 fibers was two times faster than that of T700 fibers. The diameter of T700 fibers decreased linearly with increasing burn-off. The diameter of T300 also decreased with increasing burn-off but at slower rates over time. Cross-sectional observations after oxidation reactions revealed hollow cores in the longitudinal direction for both T300 and T700 fibers. The formation of hollow cores after oxidation can be traced to differences in the fabrication process such as the starting material and final heat treatment temperature.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제3권2호
• /
• pp.87-90
• /
• 1998

Hemolymph is oxidized and darkens visibly during the collection from silkworm due to the activity of tyrosinase in it. Toxic quinones are produced by the oxidation and consequently inhibit the cell growth. Heat treatment can be used to prevent the oxidation ; however, the oxidation may occur during the collection of hemolymph before it is heat-treated. It makes the hemolymph collection difficult especially on a large-scale preparation. Hemolymphs collected from 257 different strains of silkworms were examined to select the slowly oxidized hemolymphs. Hemolymphs collected from mutant strains such as Lemone, TBO, Cre, Y4, and wEb showed relatively slow color changes. Oxidation rates of the hemolymphs were measured by the absorbance change using a spectrophotometer. The hemolymph of wEb showed the slowest oxidation. The absorbance of this mutant hemolymph reached the saturation value at 20$^{\circ}C$ in 450 min, whereas the total oxidation time of the wild-type (Baekokjam) hemolymph at the same temperature was 120 min. We tested if this mutant hemolymph is useful as a medium supplement for insect cell culture. Cell growth rate and final cell concentration in the medium supplemented with the wEb hemolymph were almost same as those in the medium supplemented with the wild-type hemolymph. Hemolymph is collected on a small scale by clipping the abdominal leg; however, this method is not appropriate fro large scale preparation. Centrifugation after chopping the silkworm hemolymph by a blending mixer is a more appropriate procedure for large scale collection. Slowly oxidized wEb hemolymph resulted in higher cell concentration than the wild-type hemolymph when hemolymph was collected by the large scale preparation method.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1259-1259
• /
• 2001

Meat becomes brown and rancid during storage in the refrigerator and display in the case. Color changes, metmyoglobin formation and lipid oxidation are the important problems in the transportation / distribution of meat and retail display. The freshness of meat is determined by the sense of vision and smell. Since conventional method determining lipid oxidation is time consuming and destructive (it needs to homogenize meat with reagents, filtrate, time for reaction and read optical density using spectroscopy), more rapid and nondestructive technical tools are desired. The objective of this work was to evaluate near-infrared spectroscopy as an analytical tool for determining meat color, metmyoglobin formation and lipid oxidation. in beef, pork and chicken. Semitendinosus and longissimus thoracis muscles from six beef steers, biceps femoris and longissimus thoracis muscles from twelve LWD crossbred pigs, and superficial pectoral muscles from twenty-four broilers were used. About a 5-cm diameter and 1-cm thick sample (20.0g) was cut from the muscle and placed on plastic foam, over-wrapped with PVC film, and displayed under flourescent lights at 4 degrees C. during 10 days for beef and pork or 4 days for chicken. The spectra was measured by NIR systems Model 5500 Spectrophotometer using fiber optic scan at range of 400 - 1100 nm. Data were recorded at 2 nm intervals and 10 scans / 10 sec were averaged for every sample. Data obtained were saved as log 1/Re, where Re is the reflectance energy, and then mathematically transformed to second derivatives to reduce effects of differences in particle size. $L^{*}$, $a^{*}$ and $b^{*}$, and metmyoglobin formation were determined by conventional spectrophotometer using the integrating sphere unit. 2-Thiobarbituric acid reactive substances (TBARS) were measured for lipid oxidation. A multiple linear regression was used to find the equation which would best fit the data. The number of wavelengths used in the equation was selected based on the fewer number compared to the increasing multiple correlation and Decreasing standard error. (omitted)

• 한국세라믹학회지
• /
• 제42권11호
• /
• pp.722-728
• /
• 2005

A wet-chemical route was utilized to obtain nanosized crystalline goethite ($\alpha$-FeOOH) particle, which was known as an oxidation catalyst in reducing carbon monoxide (CO) and dioxine during incineration. A cost-effective $FeSO_4{\cdot}7H_2O$ was used as starting raw material and a successive process of hydrolysis-oxidation was utilized as synthetic method. The effects of the initial $Fe^{2+}$ concentration, hydrolysis time and oxidation period on the crystalline phase and particle characteristics were systematically investigated by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and BET analyses. It was found that the spindle-shaped crystalline $\alpha$-FeOOH particle with the width of 70 nm and the length of 200 nm could be obtained successfully when the initial concentration of 1.5 M, hydrolysis time of 4h, and oxidation period of 10 h, respectively. In addition, it was observed that the spindle-shaped $\alpha$-FeOOH particle consisted of nano-sized primary crystallites of $30\~50\;nm$, which were de-agglomerated into individual particle and successively re­agglomerated into spherical or irregular-shaped agglomerates beyond certain periods in the hydrolysis and oxidation process.

• Advances in nano research
• /
• 제13권6호
• /
• pp.513-525
• /
• 2022

In this study, it was aimed to evaluate direct oxidation of aqueous solution containing cefalexin antibiotic with new generation Sn/Sb/Ni: 500/8/1 anode. The fact that there is no such a study on treatment of cefalexin with these new anode made this study unique. According to the operating parameters evaluation COD graphs showed clearer results compared to TOC and CLX and thus, it was it was chosen as major parameter. Furthermore, pseudo-first degree kd values were calculated from CLX results to show more accurate and specific results. Experimental results showed that after 60 min of electrochemical oxidation, complete removal of COD and TOC was accomplished with 750 mg L^-1 KCl, at pH 7, 50 mA cm^-2 current density and 1 cm anode-cathode distance. Also, the stability of the Sn/Sb/Ni anode was evaluated by taking SEM and AFM images and XRD analysis before and after of electrochemical oxidation processes. According to the results, it was not occurred too much change on the anode surface even after 300 h of electrolysis. Thus, it was thought that the anode material was not corroded to a large extent. Furthermore, the removal efficiencies were very high for almost all the time and conditions. According to the results of the study, electrochemical oxidation with new generation Sn/Sb/Ni anodes for the removal of cefalexin antibiotic was found very successful and applicable due to require less reaction time complete mineralization and doesn't require pH adjustment step compared to other studies in literature. In future studies, different antibiotic types should be studied with this anode and maybe with real wastewaters to test applicability of the process in treatment of pharmaceutical wastewaters containing antibiotics, in a better way.