• Journal of the Mineralogical Society of Korea
• /
• v.27 no.2
• /
• pp.73-83
• /
• 2014

In order to investigate selective phase transformations and to determine the maximum Au leaching factors from microwave treated Au-bearing complex sulfides, a microscope, SEM-EDS analysis, and thiocyanate leaching tests were performed. When the Au-bearing complex sulfides were exposed to microwave heating, increasing the microwave exposure time increased temperature and decreased weight. Arsenopyrite was first selectively transformed to hematite, which formed a concentric rim structure. In this hematite, oxygen and carbon was detected and always showed high iron content and low arsenic content due to arcing and oxidation from microwave heating. The results of the leaching test using microwave treated sample showed that the maximum Au leaching parameters was reached with 0.5 g concentration thiocyanate, 2.0 M hydrochloric acid, 0.3 M copper sulfate and leaching temperature at$60^{\circ}C$. Under the maximum Au leaching conditions, 59% to 96.69% of Au was leached from the microwave treated samples, whereas only 24.53% to 92% of the Au was leached from the untreated samples.

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.775-783
• /
• 2013

Changes in the various quality characteristics of hamburg steak depending on the packaging methods were investigated during storage at $5{\pm}1^{\circ}C$ for up to 15 days. Three packaging treatments including vacuum packaging (VAP), air-containing packaging (AC), and oxygen scavenger packaging (OS) were applied in this experiment. The initial total aerobe bacteria counts were identical at 2.3 log CFU/g in all treatments, but the growth rate of total aerobe bacteria in the AC samples was significantly faster than the VAP and OS samples during storage. The changes in the TBA and VBN values over the storage time showed that lipid oxidation and protein spoilage developed fastest in the AC sample, followed by OS and then VAP samples. The instrumental color and texture profiles were not significantly differ between treatments during storage (p>0.05). After 12 days of storage at $5^{\circ}C$, evaluation of the samples' sensory attributes showed that the AC samples had become unmarketable with a score of less than 5.0 points for all sensory properties, whereas the VAP and OS samples were still marketable.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.463-471
• /
• 2011

A novel $N_2O_2$ Schiff base ligand, N,N'-bis(4-methoxysalicylidene)phenylendiamine(4-$CH_3O$-Salphen), has been synthesized. It has been revealed that the compound is very useful for the spectrophotometric quantification of Fe(II) and Fe(III) ions in aqueous solutions, such as mineral water, hot spring water, sea water, and waste water. The optimum conditions for the quantitative analysis are the followings; [4-$CH_3O$-Salphen]=$4.0{\times}10^{-4}\;M$, DMF/$H_2O$=70/30(v/v), pH=3.4~3.8, T= at $55^{\circ}C$, and prereaction time=1.0 hr. The sample of single valence state was prepared by the preliminary oxidation or reduction using $H_2O_2$ ($5.0{\times}10^{-4}\;M$) and $NH_2OH{\cdot}HCl$ ($5.0{\times}10^{-4}\;M$). The quantitative analyses of Fe(II) and Fe(III) ion were performed by measuring the absorbance at 434 nm and 456 nm, respectively. The estimated mean values agreed well with the standard values within the range of 2.00~6.90%. The limit of detection was 27.9 ng/mL for Fe(II) and 55.8 ng/mL for Fe(III).

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.495-504
• /
• 2015

This work investigated the characteristics of a packed-bed plasma reactor system and the performances of the plasma reactors connected in series or in parallel for the decomposition of ethylene. Before the discharge ignition, the effective capacitance of the ${\gamma}$-alumina packed-bed plasma reactor was larger than that of the reactor without any packing, but after the ignition the effective capacitance was similar to each other, regardless of the packing. The energy of electrons created by plasma depends mainly on the electric field intensity, and was not significantly affected by the gas composition in the range of 0~20% (v/v) oxygen (nitrogen : 80~100% (v/v)). Among the various reactive species generated by plasma, ground-state atomic oxygen and ozone are understood to be primarily involved in oxidation reactions, and as the electric field intensity increases, the amount of ground-state atomic oxygen relatively decreases while that of nitrogen atom increases. Even though there are many parameters affecting the performance of the plasma reactor such as a voltage, discharge power, gas flow rate and residence time, all parameters can be integrated into a single parameter, namely, specific input energy (SIE). It was experimentally confirmed that the performances of the plasma reactors connected in series or in parallel could be treated as a function of SIE alone, which simplifies the scale-up design procedure. Besides, the ethylene decomposition results can be predicted by the calculation using the rate constant expressed as a function of SIE.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.6
• /
• pp.593-602
• /
• 2016

The physicochemical characteristics of particulate matter emissions from various vehicle's fuel types were studied at the facility of Transport Pollution Research Center(TPRC), National Institute of Environmental Research (NIER), Korea. Three different types of fuels such as gasoline, liquefied petroleum gas (LPG) and diesel were tested on the NIER driving mode and the constant speed modes(30, 70, and 110 km/h). Chemical composition of submicron particles from vehicle emissions was measured by the High Resolution Time of Flight Aerosol Mass Spectrometer (HR-ToF-AMS) during running cycles. Organics were dominant chemical species of particulate matter emissions for all three different vehicles' fuel types. Moreover, regardless of fuel types, emission rate of organics and inorganics decreased as the average speed of vehicle increased. The portion of fully oxidized fragment families of $C_xH_yO_z$ accounted for over 98% of organic aerosol(OA) in LPG and diesel vehicles, while the relatively high fraction of $C_xH_y$ in OA was observed in gasoline vehicle.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.4
• /
• pp.321-328
• /
• 2016

In this study, we investigated identification of anti-oxidative constituents from Ficus erecta var. sieboldii King (F. erecta) leaves. DPPH and $ABTS^+$ radical scavenging activities were screened for the ethanol extract and solvent fractions, and ethyl acetate fraction showed the most potent scavenging activities. Five constituents were isolated from the ethyl acetate fraction of F. erecta leaves; monoolein (1), oleic acid (2), lutein (3), afzelechin (4), catechin (5). The chemical structures of the isolated compounds were elucidated based on the spectroscopic data including NMR spectra, as well as comparison of the data to the literature values. As far as we know, all of the compounds 1 ~ 5 were isolated for the first time from this plant. Studies on DPPH and $ABTS^+$ radical scavenging activities were conducted for the isolated compounds. Among them, afzelechin (4) and catechin (5) showed strong DPPH and $ABTS^+$ radical scavenging activities, whose activities were comparable to a positive control vitamin C. Also, the content of catechin isolated from this plant was determined by HPLC and it was about 3.8 mg/g for the 70% ethanol extract and 20.8 mg/g for the ethyl acetate fraction. From these results, F. erecta leaves extract could be potentially applicable as anti-oxidant ingredients in cosmetic industries.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.33-40
• /
• 2008

Normally, cedar heartwood has a red color. However, it frequently changes black color (blackening phenomenon). It is reported that blackening phenomenon of cedar has been caused by oxidation of phenolics and norlignan extractives under weak alkaline conditions. In this study, heat treatment and UV irradiation were carried out to reduce the difference of color value between blackened wood and bright sap wood. Effects of temperature, moisture content, treatment time and light on decrease of color difference between blackened heartwood and sapwood were evaluated in each treatment. A decrement of different color value between blackened heartwood and bright sapwood by hot-water treatment was bigger than others. An effect of the vacuum drying was similar to that of the kiln drying. UV irradiation decreases the color difference between dried blackened heartwood and bright sapwood. It is suggested that UV irradiation could be used as final treatment to reduce the color difference on wood during drying process. Determination of optimum conditions and development of hybrid process for control of discoloration will be needed in a further study.

• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.441-447
• /
• 2002

The bleaching of discolored nonvital teeth is conservative treatment that satisfy the cosmetic desire. The most common method for this treatment, walking bleaching, is using 30% hydrogen peroxide and sodium perborate. Many alternatives are suggested for preventing the external cervical root resorption that is the common complication of the nonvital teeth bleaching with 30% hydrogen peroxide The same extent of oxidation reactions as that resulted by the bleaching with the application of 30% hydrogen peroxide and sodium perborate can also be acquired more safely by materials that contain 10% carbamide peroxide, used primarily for the bleaching of vital teeth. Therefore, this study was performed to evaluate the efficacy of 10% and 15% carbamide peroxide bleaching gel in nonvatal teeth bleaching. The internal bleaching of intentionally discolored teeth was performed in vitro with 10% carbamide peroxide (Group 1), 15% carbamide peroxide (Group 2), mixture of distilled water and sodium perborate (Group 3), and mixture of 30% hydrogen peroxide and sodium perborate (Group 4). The bleaching materials were refreshed following 3, 6, 9 and 12 days. To evaluate the bleaching effect, the color change of the crowns was measured at 1, 2, 3, 4, 7 and 15 days of bleaching using the colorimeter. The results were as follows：1. L$^*$ and $\Delta$E$^*$ values were increased with time in all bleaching agents (p<0.01). 2. There was no significant difference in L$^*$ and $\Delta$E$^*$ value among bleaching agents. 3. $\Delta$E$^*$ value higher than 3 was shown after 3 days of bleaching with 10% carbamide peroxide gel, 1 day with 15% carbamide poroxide gel, 4 days with mixture sodium perborate and distilled water and 4 days with mixture sodium perborate and 30% hydrogen peroride, respectively. These results revealed that the use of 10% and 15% carbamide peroxide bleaching gel in non-vital teeth bleaching is as effective as mixture of distilled water and sodium perborate and mixture of 30% hydrogen peroxide and sodium perborate. Accordingly, carbamide peroxide could be used clinically to bleach discolored non-vital teeth.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.285-291
• /
• 2004

As a part of assessment of the structural material for the molten salt handling system, corrosion behavior of Inconel 718, X-750, Haynes 75 and Haynes 263 alloys in the molten salt of LiCl-Li$_2$O-O$_2$was investigated in the range of temperature; $650^{\circ}C$, time; 24~168h, $Li_2O$; 3wt%, mixed gas; Ar~10%$O_2$. In the molten salt of LiCl-$Li_2O-O_2$, the order corrosion rate was Haynes 263 ＜ Haynes 75 ＜ Inconel X-750 ＜ Inconel 718. Haynes 263 alloy showed the highest corrosion resistance among the examined alloys. Corrosion products of alloys were as fellows: Haynes 75: $Cr_2O_4$, $NiFe_2O_4$, $LiNiO_2$, $Li_2NiFe_2O_4$, Inconel 718; $Cr_2O_4$, $NiFe_2O_4$, Haynes 263; $Li(Ni,Co)O_2$, $NiCr_2O_4$, $LiTiO_2$, Inconel X-750; $Cr_2O_3$, $NiFe_2O_4$,$FeNi_3$, (Al,Nb,Ti)$O_2$. Haynes 263 showed local corrosion behavior and Haynes 75, Inconel 718 and Inconel X-750 showed uniform corrosion behavior.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.4
• /
• pp.309-322
• /
• 2007

This study deals with the irradiation effects on some selected components which are being used in an Advanced Spent Fuel Conditioning Process (ACP). Irradiation test components have a higher priority from the aspect of their reliability because their degradation or failure is able to critically affect the performance of an ACP equipment. Components that we chose for the irradiation tests were the AC servo motor, potentiometer, thermocouples, accelerometer and CCD camera. ACP facility has a number of AC servo motors to move the joints of a manipulator and to operate process equipment. Potentiometers are used for a measurement of several joint angles in a manipulator. Thermocouples are used for a temperature measurement in an electrolytic reduction reactor, a vol-oxidation reactor and a molten salt transfer line. An accelerometer is installed in a slitting machine to forecast an incipient failure during a slitting process. A small CCD camera is used for an in-situ vision monitoring between ACP campaigns. We made use of a gamma-irradiation facility with cobalt-60 source for an irradiation test on the above components because gamma rays from among various radioactive rays are the most significant for electric, electronic and robotic components. Irradiation tests were carried out for enough long time for total doses to be over expected threshold values. Other components except the CCD camera showed a very high radiation hardening characteristic. Characteristic changes at different total doses were investigated and threshold values to warrant at least their performance without a deterioration were evaluated as a result of the irradiation tests.