• Journal of the Mineralogical Society of Korea
• /
• v.27 no.2
• /
• pp.97-105
• /
• 2014

Artificial precipitation ponds, consisting of three steps of oxidation pond, successive alkalinity producing system (SAPS) and swamp, were constructed for the treatment of the acid mine drainage from the Iwal coal mine. The efficacies of the passive treatment system in terms of neutralization of mine water and removal of dissolved ions were evaluated by the chemical analyses of the water samples. Mine water in the mine adits was acidic, showing the pH value of 2.28-2.42 but the value increased rapidly to 6.17-6.53 in the Oxidation pond. The purification efficiencies for the removal of Al and Fe were 100%, whereas those of $SO_4$, Mg, Ca, and Mn were relatively low of 50%, 40%, 24%, and 59%, respectively. These results indicate a need for application of additional remediation techniques in the passive treatment systems. The precipitates that formed at the bottom of the mine water channels were mainly schwertmannite ($Fe_8O_8(OH)_6SO_4$) and those in the leachate water were 2-line ferrihydrite ($Fe_2O_3{cdot}0.5H_2O$).

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1108-1113
• /
• 2005

Advanced oxidation process involving $O_3/H_2O_2$ was used to eliminate 1,4-dioxane and to enhance the biodegradability of dioxane-contaminated water. Oxidation process was carried out in a bubble column reactor under different pH and $H_2O_2$ concentrations. The removal efficiencies of 1,4-dioxane were investigated at hydrogen peroxide concentration between 40 and 120 mg/L. At the same pH, removal efficiencies of 1,4-dioxane increased with increasing initial $H_2O_2$ concentration. There was a linear relationship between initial concentration of $H_2O_2$ and the amount of consumed $O_3$. It was observed that the high $H_2O_2$ concentration accelerated the generation of hydroperoxy ions(${HO_2}^-$) and hydroxyl radicals($OH{\cdot}$). Hydrogen peroxide enhanced the decomposition of 1,4-dioxane and the biodegradability of the solution.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.465-469
• /
• 2009

Characteristics of oxidation reaction of four lanthanide chlorides(Ce, Nd, Pr and $EuCl_3$) in a oxygen-eutectic(LiCl-KCl) salt bubble column was investigated. From the results obtained from the thermochemical calculations by HSC chemistry software, the most stable lanthanide compounds in the oxygen-used rare earth chlorides system were oxychlorides(EuOCl, NdOCl, PrOCl) and oxides($CeO_2$, $PrO_2$), which coincide well with results of the Gibbs free energy of the reaction. In this study, similar to the thermochemical results, regardless of the sparging time and molten salt temperature, oxychlorides for Eu, Nd and Pr and oxides for Ce and Pr were formed as a precipitant by a reaction with oxygen. The structure of the rare earth precipitates was divided into two shapes : small cubic(oxide) and large tetragonal (oxychloride) structures. The conversion efficiencies of the lanthanide elements to their molten salt-insoluble precipitates(or compound) were increased with the sparging time and temperature, and Ce showed the best reactivity. In the conditions of $650^{\circ}C$ of the molten salt temperature and 420 min of the sparging time, the conversion efficiencies were over 99% for all the investigated lanthanide chlorides.

• Environmental Engineering Research
• /
• v.16 no.2
• /
• pp.97-102
• /
• 2011

This study investigates the treatment of pigment wastewater using a sequential batch reactor (SBR) followed by dissolved ozone flotation-pressurized ozone oxidation treatement (DOF-$PO_2$). The process efficiency has been evaluated at the lab scale on the basis of water quality parameters. In addition, the effect of pure oxygen and air was investigated on the removal of COD, BOD, and TN in the SBR process. It was observed that under comparable conditions the removal efficiencies of these water quality parameters using pure oxygen and air were similar. The effect of the recycle rate was also investigated for its impact on the water quality parameters using different ozone dissolving pressures in a DOF process in order to optimise conditions. The results conclude that the use of an SBR and ozone contact by DOF-$PO_2$ is a highly effective treatment for pigment wastewater and aids in the achievement of effluent discharge criteria.

• Water for future
• /
• v.13 no.3
• /
• pp.71-76
• /
• 1980

The oxidation ditch is an efficient, low cost form of treatment of domestic and many industrial waste. It has gained rapid acceptance because of its simplicity, low cost operation, ease of operation, simple mintenance and flexibiltiy. The objective of this investigation was to measure the removal of organics in an existing dithc that does not have return sludge and which is not preceded by primary sedimentation. To accomplish this objective, samples of the wastewater influent and effluent were collected from the wastewater treatment plant of Mansfield, Texas during practical training. These samples were collected over an extended period of time to obtain samples at various treatment temperatures. Two analytical tests, COD and suspended solids, were used to monitor the operation of the plant. The results show that high removal efficiencies were obtained at high temperatures, with the efficiency decreasing as the temperature decreased to approximatedly 16$^{\circ}C$, at which point the efficienty tmeperature relationship appeared to stabilize.

• Microbiology and Biotechnology Letters
• /
• v.40 no.1
• /
• pp.76-81
• /
• 2012

Removal of methane, benzene and toluene was evaluated in a lab-scale biocover packed with a soil mixture of forest soil and earthworm cast (75:25 weight ratio). The bacterial community in the biocover was characterized using quantitative real-time PCR and terminal restriction fragment length polymorphism. Methane was removed at the upper layer of the biocover (-0.1 ~ -0.4 m), where the oxygen concentration was remarkably lower. The average removal efficiencies for methane and benzene/toluene were 90% and 99%, respectively. The pmoA gene copy numbers, responsible for methane oxidation, in the upper layer were higher than those in the lower layer. While type I methanotrohs dominated the lower layer, type II methanotrophs, such as Methylocystis and Methylosinus, were noted to be predominant in the upper layer. Benzene and toluene were removed from the lower layer (-0.6 ~ -0.9 m) as well as the upper layer. Moreover, the tmoA gene copy number, responsible for benzene/toluene oxidation, seen in the upper layer was not significantly different from those seen in the lower layer. These results suggest that a biocover packed with a soil and earthworm cast mixture is a promising method which could be utilized for the control of methane and volatile organic compounds such as benzene and toluene.

• Analytical Science and Technology
• /
• v.14 no.1
• /
• pp.15-20
• /
• 2001

Photocatalytic $TiO_2$ films were prepared by anodic oxidation at 180 V and their structural difference caused by oxidation conditions was studies. The microstructure of $TiO_2$ films in $H_2SO_4$ and $H_2SO_4/H_2O_2$ solution was mixed type of rutile and anatase. However, the $TiO_2$ layer formed in $H_2SO_4/H_3PO_4$ and $H_2SO_4/H_3PO_4/H_2O_2$ mixture was mostly anatase type. All $TiO_2$ films prepared by anodic oxidation exhibited photocatalytic properties. The photocatalytic degradation of aniline blue was first order reaction with similar rate constants at all oxidative conditions examined in this work.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.6
• /
• pp.340-348
• /
• 2015

Removal efficiency of PCBs in contaminated marine sediments treated by Fenton-like oxidation combined with surfactant was investigated in this research in order to achieve remediation of PCBs. A washing treatment using various concentrations of hydrogen peroxide (1% and 15%) and surfactants (Triton X-100, Tween 60 and Tween 80) was evaluated at various conditions in laboratory scale experiments. The mean removal efficiencies of tPCBs varied from 24.1 to 46.7% in the sediments for 1 hour duration of the treatments. The concentration of tPCBs in contaminated marine sediments after the simultaneous treatment with hydrogen peroxide and surfactant satisfied the domestic environmental standards for the beneficial use of sediments. When suitable surfactant was used for Fenton-like oxidation, the removal efficiency of tPCBs at low concentration of hydrogen peroxide was similar to that at high hydrogen peroxide concentration. Thus the efficient removal of PCBs in contaminated marine sediments could be achieved through treatment with Fenton-like oxidation combined with surfactant washing.

• Membrane Journal
• /
• v.23 no.1
• /
• pp.61-69
• /
• 2013

The effect of humic acid (HA), and the roles of microfiltration (MF), PES (polyethersulfone) beads adsorption, and photo-oxidation were investigated in hybrid process of ceramic MF and PES beads loaded with titanium dioxide ($TiO_2$) photocatalyst for advanced drinking water treatment. Those were compared and studied in viewpoints of membrane fouling resistance ($R_f$), permeate flux (J), and total permeate volume ($V_T$). Because membrane fouling increased dramatically as decreasing HA, $R_f$ increased and J decreased, and finally $V_T$ was the highest at 2 mg/L HA. In the experiment to investigate the roles of photo-oxidation and adsorption at humic acid 4 mg/L and 6 mg/L. In both conditions, $R_f$ was the lowest and $V_T$ was the highest in MF + $TiO_2$ + UV process. The average treatment efficiencies of turbidity and dissolved organic matters were the highest in MF + $TiO_2$ + UV process, too.

• Environmental Engineering Research
• /
• v.11 no.6
• /
• pp.311-317
• /
• 2006

Feasibility of destroying synthetic and actual leachate containing humic acids and ammonia compounds by supercritical water oxidation (SCWO) was evaluated. In this study, destruction efficiencies of humic acids and ammonia respectively were investigated at various reaction temperatures and residence times under pressure a supercritical pressure (280 atm). To lower reaction temperature, chemical oxidants were used. The experiment was carried out in a cylindrical batch reactor made of Hastelloy C-276 that can withstand high temperature and pressure. Concentrations of humic acids and ammonia were measured using a $COD_{Cr}$ method and an ammonia selective electrode, respectively. The optimal destructive condition of humic acids in the presence of stoichiometric oxygen(air) was 3 min at $380^{\circ}C$, but the temperature could be lowered to subcritical region ($360^{\circ}C$) along with $H_2O_2$ as an oxidant. For ammonia, the optimal destructive condition with air was 5 min at $660^{\circ}C$, but it was possible to operate the process for 3 minutes at $550^{\circ}C$ or 2 min at $600^{\circ}C$ along with $H_2O_2$ as an oxidant. At 2 min and $550^{\circ}C$ along with $H_2O_2$ as an oxidant, humic and ammonia compounds in the actual leachate were easily destructed and the effluent quality met the Korea Standard Leachate Quality.