• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2006.05a
• /
• pp.291-294
• /
• 2006

• Journal of Environmental Science International
• /
• v.18 no.10
• /
• pp.1071-1077
• /
• 2009

A novel pretreatment technique was applied to the conventional Pt/alumina catalyst to prepare for the highly efficient catalyst for the preferential oxidation of carbon monoxide in hydrogen-rich condition. Their performance was investigated by selective CO oxidation reaction. CO conversion with the oxygen-treated Pt/Alumina catalyst increased remarkably especially at the low temperature below $100^{\circ}C$. This result is promising for the normal operation of the proton exchange membrane fuel cell (PEMFC) without CO poisoning of the anode catalyst. XRD analysis results showed that metallic Pt peaks were not observed for the oxygen-treated catalyst. This implies that well dispersed small Pt particles exist on the catalyst. This result was continued by high resolution transmission electron microscopy (HRTEM) analysis. Consequently, it can be concluded that highly dispersed Pt nanoparticles could be prepared by the novel pretreatment technique and thus, CO conversion could be increased considerably especially at the low temperatures below $100^{\circ}C$.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.6
• /
• pp.877-880
• /
• 1999

Over 50 morphologically distinctive soil Streptomyces were isolated from various Jocations in the Yongin area in Korea and visually screened for dye-decoloring activities on an agar plate. Two Streptomyces species (AD001 and ND002) showed strong dye-decoloring activities on the plate containing congo-red and new-fuchin dyes, respectively. Also, the liquid culture supernatants of these species showed 2,4-dicholophenol (DCP) oxidation activities only in the presence of hydrogen peroxide, a characteristic of Actinomycetes lignin-peroxidase (ALiP)-P3 isoform found in dye-degrading S. viridosporus T7A and S. badius 252. Based on their dye-decoloring capabilities and the 2,4-DCP oxidation kinetic data, it is suggested that these Streptomyces secrete not-yet-characterized extracelluar enzyme(s), whose activities are very similar to the ALiP-P3 enzyme.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.36-42
• /
• 2020

Silver nanowire (AgNW) random-meshes with high transmittance, low sheet resistance, and high oxidation stability and flexibility were fabricated using solution-based processes. The random-mesh structure was obtained by forming bubbles whose sizes and densities were controlled using a corona treatment of polyethylene terephthalate (PET) substrates. To reduce the sheet resistance of the fabricated AgNW electrode, a washing process using ethanol solution was performed. In addition, nickel (Ni) was coated on AgNW to improve resistance to oxidation. The effects of corona treatment and Ni-coating on the transmittance, sheet resistance, oxidation stability, and flexibility of the AgNW electrodes were investigated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.9
• /
• pp.765-770
• /
• 2003

We have developed a low-temperature, and low-pressure radical induced oxidation (RIO) technology, so that high-quality ultrathin silicon dioxide layers have been effectively produced with a high reproducibility, and successfully employed to realize high performace SiGe heterostructure complementary MOSFETs (HCMOS) lot the first time. The obtained oxide layer showed comparable leakage and breakdown properties to conventional furnace gate oxides, and no hysteresis was observed during high-frequency capacitance-voltage characterization. Strained SiGe HCMOS transistors with a 2.5 nm-thick gate oxide layer grown by this method exhibited excellent device properties. These suggest that the present technique is particularly suitable for HCMOS devices requiring a fast and high-precision gate oxidation process with a low thermal budget.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.319.2-319
• /
• 2002

Synchrotron-based X-ray absorption spectroscopy has been applied to determine the changes in bulk oxidation state of uranium oxides in molten salt. From an analysis of XANES data, one can determine the cahnges in bulk oxidation-state of U compounds in salts(LiCl/KCl). XAFS spectroscpy is a powerful tool for probing the changes in valence state and structure of uranium compounds in colten salt as well as in noncrystalline form and doped in other matrices.

• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.51-58
• /
• 2020

In this study, the thermal oxidation of raw natural rubber (NR) was investigated under controlled conditions by optical image and fourier transform infrared (FT-IR) analysis. The thermal oxidation was performed on a transparent thin film of raw NR coated on a KBr window in a dark chamber at 80℃ under low humidity conditions to completely exclude moisture and restrict light oxidation. Images of the thin film of raw NR were obtained before and after thermal oxidation. FT-IR absorption spectra were measured in the transmission mode at different thermal exposure times. The thermal oxidation of NR was examined by the changes in the absorption peaks at 3449, 1736, 1447, 1377, 1242, 1072, and 833 cm^-1, which corresponded to a hydroxyl group (-OH), a carbonyl group (-C=O) from an aldehyde and a ketone, a methylene group (-CH₂-), a methyl group (-CH₃), a carbon-oxygen single bond (-C-O) from an epoxide, a carbon-oxygen bond (-C-O) from an ether, an alcohol, a peroxide, or a cyclic peroxide, and a cis-methine group (cis-CCH₃=CH-), respectively. In the initial stage of thermal oxidation, two different types of free radicals were produced quickly and randomly by the homolytic cleavage of a double bond and allylic hydrogen abstraction. Aldehydes and ketones were formed from chain scissions of the double bonds and alcohols were produced from allylic hydrogen abstraction at the methylene or methyl groups. Two reactions seemed to proceed competitively with each other. At a later stage, oxidative crosslinks seemed to dominate through the combination of free radicals such as an allyl radical (CH=CHCH₂·), alkoxy radical (RO·), and peroxy radical (ROO·) and the reaction of a hydroperoxide (-ROOH) with a double bond. The image obtained after thermal oxidation showed hardening without cracks. Based on these observations, a plausible two-step mechanism was suggested for chain hardening caused by the thermal oxidation.

• Macromolecular Research
• /
• v.17 no.11
• /
• pp.886-893
• /
• 2009

Surface modifications using a radio frequency Ar-plasma treatment were performed on a polypropylene (PP) blend used for automotive bumper fascia. The surface characterization and morphology were examined. With increasing aging time, there was an increase in wettability, oxygen containing polar functional groups (i.e., C-O, C=O and O-C=O) due to oxidation, the amount of tale, and bearing depth and roughness on the PP surface, while there was a decrease in the number of hydrocarbon groups (i.e., C-C and C-H). AFM indicated that the Ar-plasma-treatment on a PP blend surface transforms the wholly annular surface into a locally dimpled surface, leading to an improvement in wettability. SEM showed that the PP layer observed in the non-plasma-treated sample was removed after the Ar-plasma treatment and the rubber particles were exposed to the surface. The observed surface characterization and morphologies are responsible for the improved wettability and interfacial adhesion between the PP blend substrate and bumper coating layers.

• Applied Microscopy
• /
• v.42 no.3
• /
• pp.174-178
• /
• 2012

In the present study, the oxidation behavior of $Cu_{50}Zr_{50}$ and $Cu_{46}Zr_{46}Al_8$ metallic glasses has been investigated using transmission electron microscopy with a particular attention on the oxidation behavior in the supercooled liquid state. Identification of the oxidation product after continuous heating treatment shows that in $Cu_{50}Zr_{50}$ metallic glass, $ZrO_2$ with the monoclinic structure forms on the supercooled liquid as well as on the crystallized matrix. On the contrary, in $Cu_{46}Zr_{46}Al_8$ metallic glass, $ZrO_2$ with the tetragonal structure forms on the supercooled liquid, but that with the monoclinic structure forms on the crystallized matrix. The result indicates that the $Cu_{50}Zr_{50}$ metallic glass exhibits far better oxidation resistance in the supercooled liquid state than the $Cu_{46}Zr_{46}Al_8$ metallic glass.

• Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.32-40
• /
• 2009

In this study, we have prepared three kinds of carbon nanometer tube $CNT/TiO_{2}$ electrodes through impregnation with different concentration titanium n-butoxide (TNB) solution. The prepared electrodes were characterized with surface properties, structural crystallinity, elemental identification and photoelectrocatalytic activity. The $N_2$ adsorption data showed that the composites had decreased surface area compared with the pristine CNT. This indicated the blocking of micropores on the surface of CNT, which was further supported by observation via SEM. XRD results showed patterns for the composites and a typical single and clear anatase crystal structure. The main elements such as C, O and Ti were existed for all samples from the EDX data. The catalytic efficiency of the developed electrode was evaluated by the photoelectrodegradation of methylene blue (MB). The positive potential applied in photoelectrocatalytic (PEC) oxidation was studied. It was found that photoelectrocatalytic (PEC) decomposition of MB solution could be attributed to combination effects between $TiO_2$ photocatalytic and CNT electro-assisted. Through the comparison between photocatalytic (PC) oxidation and photoelectrocatalytic (PEC) oxidation, it was found that the PEC oxidation efficiency for MB is higher than that of PC oxidation.