• Korean Journal of Veterinary Service
• /
• v.28 no.3
• /
• pp.203-213
• /
• 2005

Oxytetracycline, tetracycline, chlortetracycline and doxycycline in honey were separated by solid phase extraction (SPE) and determined with high performance liquid chromatography (HPLC) with UV/Visible detector. Analysis was carried out using following conditions: XTerra $C_8$ column $(3.9\times150mm\;i.d. 5{\mu}m)$, mobile phase composed of 0.01M oxalic acid : methanol : acetonitrile (820 : 80 : 100, v/v/v), isocratic pump at a flow rate of 0.9 ml/min. and $50{\mu}l$ of injection volume, UV/Visible detector with wavelength of 360nm. The calibration curves of four tetracyclines showed linearity $(\gamma^2>0.999)$ at concentration range of $100\~1,000 ng/ml$. The recoveries in fortified honey represented more than $70\%$ with low coefficient of variation $(<10\%)$ for concentration range of four tetracyclines. The detection limits for oxytetracycline, tetracycline, chlortetracycline and doxycycline were 13.8, 14.6, 26.2 and 24.9ng/g in acacia honey. respectively. We also monitored tetracyclines residue in domestic honey [n : 38, acacia (20), wild flower (18) ] and foreign honey [n=22, legally distributed (13), illegally distributed (9)] using modified Charm II screening and HPLC confirmation methods. Seven of the 60 samples $(11.7\%)$ were suspect positive using modified Charm II screening test. Chlortetracycline residue was found in one foreign honey (illegally distributed) tested at concentrations of 0.22 ppm. Conclusively, for more effective control of tetracyclines used in beekeeping should be further survey for residues in honey and also national guidelines (maximum residue limit : MRL) and methods should be obligatory.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.611-615
• /
• 2013

Vanadium oxide ($VO_2$) and tungsten-doped vanadium oxide (W-$VO_2$) powder, well known as thermochromic materials, were prepared from vanadium pentoxide ($V_2O_5$) and oxalic acid dihydrate by hydrothermal and calcination process. The crystal structure and thermochromic property of samples were analyzed using FE-SEM, XRD, XPS, DSC, and UV-Vis-NIR spectroscopy. With increasing the doping amount of W, the phase transition temperature of W-$VO_2$ sample decreased from $70^{\circ}C$ to $42^{\circ}C$. When heating W-$VO_2$ sample above the phase transition temperature, the UV-Vis-NIR spectrum was not changed in the visible range and shifted towards a low transparency in the full name (NIR) region.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.579-588
• /
• 2007

Statement of problem: A tenderness of the dentin after tapering of teeth for dental prosthesis is a common phenomenon. In practice, the alternative desensitizer may be used for minor pain after tapering of teeth. Purpose: In this study, the desensitizers were used to investigate the affect decreasing of shear bond strength according to the use of various cement, such as resin, Glass Ionomer, and phosphate cement. Material and method: Three different desensitizers were used on this study Compositions of two dentin desensitizers were HEMA(hydroxyethylmethacrylate) and glutaraldehyde. The other one is oxalic acid. Three dentin desensitizers applied on 12 degrees taper teeth. Then, Ni-Cr crowns were bonded with Resin cement, Zinc Phosphate (ZPC) cement and Glass Ionomer (GIC) cement. 120 human premolar teeth were used for specimens. The specimens were divided into four group as the reference and the empirical each with thirty specimens, then further divided into 12 group according to type of desensitizers and cement types. The shear bond strength were measured by Instron multi task instrument. Results: According to the result, the measured shear bond strength in order from the weakest to the strongest in general was ZPC, Resin, and GIC. And it is found that the application of desensitizers on dentin surface does not affect the shear bond strength. Conclusion: Dentin desensitizers that alleviate or prevent a dentin tenderness, usually contains HEMA and glutaraldehyde compounds. Such desensitizers are widely used in clinical studies. By applying the dentin desensitizer on the exposed dentin surface, the dentin capillary are blocked and periodontal membrane and cementum can not be drawn in pulp cavity. Since HEMA and glutaraldehyde may cause harm to the pulp cavity, an alternative desensitizer was developed.

• Corrosion Science and Technology
• /
• v.13 no.3
• /
• pp.87-94
• /
• 2014

Recently, the application of bending products has been increased since the industries such as automobile, aerospace, ships, and plants greatly need the usage of pipes. For facility fabrication, bending process is one of key technologies for pipings. Induction heat bending process is composed of bending deformation by repeated local heat and cooling. Because of local heating and compressive strain, detrimental phases may be precipitated and microstructural change can be induced. This work focused on the effect of induction heat bending process on the properties of ASME SA312 TP316 stainless steel. Evaluation was done on the base metal and the bended areas before and after heat treatment. Microstructure analysis, intergranular corrosion test including Huey test, double loop electropotentiokinetic reactivation test, oxalic acid etch test, and anodic polarization test were performed. On the base of microstructural analysis, grain boundaries in bended extrados area were zagged by bending process, but there were no precipitates in grain and grain boundary and the intergranular corrosion rate was similar to that of base metal. However, pitting potentials of bended area were lower than that of the base metal and zagged boundaries was one of the pitting initiation sites. By re-annealing treatment, grain boundary was recovered and pitting potential was similar to that of the base metal.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.65-69
• /
• 1989

Barium titanyl oxalate was synthesized by adding ethanol solution of oxalic acid to the mixed aqueous solution which contained barium or lanthanum radiotracers in addition to Ba(NO$_3)_2$ and TiO(NO$_3)_2$. The oxalate was finally converted to BaTiO$_3$ by calcination at 1000$^{\circ}$C in air. The chemical formula of the oxalate was confirmed to be BaTiO(CTEX>$_2O_4)_2{\cdot}4H_2O$ by the thermal analysis of the barium titanyl oxalate. When the mixture's molar ratio(Ba/Ti) was within a range of 0.950-1.05, the formation of stoichiometric Barium titanate was confirmed with the help of barium tracers. The homogeneity of lanthanum deposite in the final product was also confirmed through the behavior of lanthanum tracers. The results as well as those obtained by XRD and SEM have been explained on the basis of the fact that the reaction occurs on the molecular level in solution and the barium titanate is formed in crystals of single phase.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.2
• /
• pp.175-180
• /
• 1992

For the effective utilizing of polyunsaturated lipids in filefish viscera wasted from marine manufactory the conditions of degumming, deacidification, decoloring and deodorization for the processing of refined viscera oil were investigated. In the process of refining degumming with 20$m\ell$ of 4% oxalic acid per 100$m\ell$ of crude filefish viscera oil resulted in the lowest residual phosphorus content as 115.8 ppm and optimal condition to neutralize the filefish viscera oil was treating for 30min at 60$^{\circ}C$ with 0.5% excess of 4M sodium hydroxide solution. Decoloring was optimized by adding 10% bleaching earth and treating for 20min at 60$^{\circ}C$ under vacuum, and deodorizing was done by steam distillation at 180$^{\circ}C$ under 4 torr of vacuum.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.30-31
• /
• 2006

The LSCF cathode for Solid Oxide Fuel Cell was investigated to develop high performance unit cell at intermediate temperature by modified oxalate method with different electrolyte. The LSCF precursors using oxalic acid, ethanol and $NH_4OH$ solution were prepared at $80^{\circ}C$, and pH was controlled as 2, 6, 7, 8, 9 and 10. The synthesis precursor powders were calcined at $800^{\circ}C$, $1000^{\circ}C$ and $1200^{\circ}C$ for 4hrs. Unit cells were prepared with the calcined LSCF cathode, buffer layer between cathode and each electrolyte that is the LSGM, YSZ, ScSZ and CeSZ. The synthesis LSCF powders by modified oxalate method were measured by scanning electron microscope and X-ray diffraction. The interfacial polarization resistance of cell was characterized by Solatron 1260 analyzer. The crystal of LSCF powders show single phase at pH 2, 6, 7, 8 and 9, and the average particle size was about $3{\mu}m$. The electric conductivity of synthesis LSCF cathode which was calcined at $1200^{\circ}C$ shows the highest value at pH 7. The cell consist of GDC had the lowest interfacial resistance (about 950 S/cm@650) of the cathode electrode. The polarization resistance of synthesis LSCF cathode by modified oxalate method has the value from 4.02 to 7.46ohm at $650^{\circ}C$. GDC among the electrolytes, shows the lowest polarization resistance.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.318-325
• /
• 2023

The detection of antibiotics in treated wastewater is a global concern as it enters water bodies and causes the development of antibiotic resistance genes in humans and marine life. The study specifically aims to explore the potential of ferrate (VI) in eliminating tetracycline (TCL). The degradation of TCL is optimized with parametric studies, viz., the effect of pH and concentration, which provide insights into TCL elimination. The increase in pH (from 7.0 to 10.0) favors the percentage removal of TCL; however, the increase in TCL concentrations from 0.02 to 0.3 mmol/L caused a decrease in percentage TCL removal from 97.4 to 29.1%, respectively, at pH 10.0. The time-dependent elimination of TCL using ferrate (VI) followed pseudosecond-order rate kinetics, and an apparent rate constant (kapp) was found at 1978.8 L² /mol² /min. Coexisting ions, i.e., NaNO₃, Na₂HPO₄, NaCl, and oxalic acid, negligibly affect the oxidation of TCL by ferrate (VI). However, EDTA and glycine significantly inhibited the elimination of TCL using ferrate (VI). The mineralization of TCL using ferrate (VI) was favored at higher pH, and it increased from 18.57 to 32.52% when the solution pH increased from pH 7.0 to 10.0. Additionally, the real water samples containing a relatively high level of inorganic carbon spiked with TCL revealed that ferrate (VI) performance in the removal of TCL was unaffected, which further inferred the potential of ferrate (VI) in real implications.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.288-294
• /
• 2007

The LSCF cathode far Solid Oxide Fuel Cell was investigated to develop high performance unit cell at intermediate temperature by modified oxalate method with different electrolytes and different pH. The LSCF powders employed La, Sr, Co and Fe oxides, oxalic acid, ethanol and $NH_4OH$ solution were synthesized with pH controlled as 2, 6, 7, 8, 9 and 10 at $80^{\circ}C$ Single crystalline phase was obtained from pH $2{\sim}9$. on the other hand, $La_2O_3$ appeared from pH 10. Very fine powder with particle size of 50 nm was obtained at calcination temperature of $800^{\circ}C$ for 4 hours. LSCF cathode synthesized at pH 7 showed the highest electric conductivity in the temperature range of $600^{\circ}C$ to $900^{\circ}C$ its value was 950 S/cm at $900^{\circ}C$ Under same synthesis conditions, polarization resistance of each LSCF cathode was changed with different calcination temperatures. As-prepared powder presented 2.52, 1.54 and $2.58\;{\Omega}$ at $600^{\circ}C$ with ScSZ, 8Y-YSZ and GDC as its electrolyte respectively after calcination at $800^{\circ}C$ for 4 hours.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.367-372
• /
• 2002

In order to utilize safflower seed effectively as a food material, it was processed at the conditions including roasting temperature/time of 170$\^{C}$/10 min to 210$\^{C}$/30 min, ethanol concentration of 0 to 100% (V/V) and enzyme hydrolysis with $\alpha$-amylase, $\beta$-amylase, amyloglucosidase and cellulase. Safflower seed extracts had the highest soluble solid content at the condition of 60% ethanol concentration, roasting at 190$\^{C}$ for 20 min and hydrolysis with amyloglucosidase. Total phenolic compounds increased with the ethanol concentration, showing the highest at the condition of 80% ethanol, roasting at 170$\^{C}$ for 30 min and hydrolysis with amyloglucosidase. High level total flavonoid was observed at the condition of 80% ethanol, roasting at 210$\^{C}$ for 30 min and hydrolysis with amyloglucosidase. Safflower seed had sucrose as major free sugar as well as xylose and arabinose as minor free sugars. Organic acids in safflower seed included oxalic, citric, magic and fumaric acid. Serotonin I (N-[2-(5-hydroxy-1H-indo-1-3-yl)ethyl]ftrulamide) and serotonin II (N-[2-(5-hydroxy-1H-indol-3yl)ethyl]-p-coumaramide) as antioxidant compounds increased with ethanol concentration, showing the highest revel at 60% ethanol. Acacetin content increased with temperature and roasting time, with a maximum of 69.47 mg% at 210$\^{C}$ for 30 min.