• The Journal of the Acoustical Society of Korea
• /
• v.31 no.7
• /
• pp.427-434
• /
• 2012

The overlap-add technique based on waveform similarity (WSOLA) method is known to be an efficient high-quality algorithm for time scaling of speech signal. The computational load of WSOLA is concentrated on the repeated normalized cross-correlation (NCC) calculation to evaluate the similarity between two signal waveforms. To reduce the computational complexity of WSOLA, this paper proposes a fast NCC computation method, in which NCC is obtained through pre-calculated sum tables to eliminate redundancy of repeated NCC calculations in the adjacent regions. While the denominator part of NCC has much redundancy irrespective of the time-scale factor, the numerator part of NCC has less redundancy and the amount of redundancy is dependent on both the time-scale factor and optimal shift value, thereby requiring more sophisticated algorithm for fast computation. The simulation results show that the proposed method reduces about 40%, 47% and 52% of the WSOLA execution time for the time-scale compression, 2 and 3 times time-scale expansions, respectively, while maintaining exactly the same speech quality of the conventional WSOLA.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.75-83
• /
• 2023

As part of a study to analyze the excessive camber occurring in prestressed concrete railway bridges, this paper presents a calculation method and analysis results for the creep coefficient which defines the increase in camber of a concrete structure over time. Using the creep coefficient formula of the design code, the coefficient is obtained by applying the climatic conditions (relative humidity and temperature) of 12 regions in Korea. The effects of differences in climatic conditions by region and starting time of load on the creep coefficient are analyzed. In order to properly calculate the creep, most of which occurs in the early stages of loading, a detailed analysis is performed by applying a time step analysis method to consider varying climate conditions through loaded period. The creep coefficient obtained by applying the average climate conditions of the region is similar to the average of the creep coefficients obtained by time step analysis. Through time step analysis, it is shown that the offset and overlap effects of relative humidity and temperature on the creep coefficient and the climate effect at the time of initial loading can be appropriately represented.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.3
• /
• pp.91-98
• /
• 2013

Node which plays the role of cache server does not exist in the wireless ad-hoc network consisting of only mobile nodes. Even if it exists, it is difficult to provide cache services due to the movement of nodes. Therefore, the cooperative cache technique is necessary in order to improve the efficiency of information access by reducing data access time and use of bandwidth in the wireless ad-hoc network. In this paper, the whole network is divided into zones which don't overlap and master node of each zone is elected. General node of each zone has ZICT and manages cache data to cooperative cache and gateway node use NZCT to manage cache information of neighbor zone. We proposed security structure which can accomplish send and receive in the only node issued id key in the elected master node in order to prepare for cache consistent attack which is vulnerability of distributed caching techniques. The performance of the proposed method in this paper could confirm the excellent performance through comparative experiments of GCC and GC techniques.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1531-1534
• /
• 2005

Nano pattern is being utilized to produce micro optical components, sensors, and information storage devices. In this study, a study on nano pattern fabrication using raster-scan type Focused Ion Beam (FIB) milling is introduced. Because the intensity of ion beam has Gaussian distribution, the overlapping of the Gaussian beam results in a 3D pattern, and the shape of the pattern can be adjusted by variation of FIB milling parameters, such as overlap, ion dose, and dwell time. The Gaussian shape of single beam intensity has been investigated by experiment, and 3D nano patterns with pitch of 200nm generated by FIB is demonstrated.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1111-1118
• /
• 2003

We present one-color nonlinear wavepacket interferometry (WPI) signal calculations for a system of two electronic levels and one vibrational degree of freedom. We consider two cases, a displaced harmonic oscillator system, which can be treated analytically, and a model photodissociative system, whose WPI signal must be calculated by numerical wavepacket propagation. We show how signals obtained with different combinations of intrapulse-pair phase shifts can be combined to isolate the complex-valued overlap between a given onepulse target wavepacket and a variable three-pulse reference wavepacket. We demonstrate that with a range of inter- and intrapulse-pair delays the complex overlaps and variable reference states can be used to reconstruct the target wavepacket. We compare our results with previous methods for vibronic state reconstruction based on linear WPI and discuss further generalizations of our method.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1138-1144
• /
• 2008

To study the feasibility of applying wireless communication technology to the control of train for the effective control of train and for the reduction of cost and time to construct the necessary infra structure, we investigate into the application of the existing commercial WCDMA network to CBTC (communication-based train control) to grasp the obstacles and propose the solutions to circumvent them. The obstacles can be categorized into the hand-off problem, the interference problem near the stations, and the problem of radio shadow areas. We propose, as solutions, the cell overlap method and multi-terminal approach for the hand-off problem, the cell sectoring method for the interference problem, and establishment of new base stations along the railroad both to provide the wireless train control and communication service to the customers on the train which was otherwise impossible because of the shadowing effect.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.40-47
• /
• 2010

This paper presents a simultaneous localization and mapping (SLAM) of an indoor hallway environment using Rao-Blackwellized particle filter (RBPF) along with a line segment as a landmark. Based on the fact that fluent line features can be extracted around the ceiling and side walls of hallway using vision sensor, a horizontal line segment is extracted from an edge image using Hough transform and is also tracked continuously by an optical flow method. A successive observation of a line segment gives initial state of the line in 3D space. For data association, registered feature and observed feature are matched in image space through a degree of overlap, an orientation of line, and a distance between two lines. Experiments show that a compact environmental map can be constructed with small number of horizontal line features in real-time.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.202-211
• /
• 2005

This paper introduces and illustrates the results of a new method fer offsetting triangular mesh by moving all vertices along the multiple normal vectors of a vertex. The multiple normal vectors of a vertex are set the same as the normal vectors of the faces surrounding the vertex, while the two vectors with the smallest difference are joined repeatedly until the difference is smaller than allowance. Offsetting with the multiple normal vectors of a vertex does not create a gap or overlap at the smooth edges, thereby making the mesh size uniform and the computation time short. In addition, this offsetting method is accurate at the sharp edges because the vertices are moved to the normal directions of faces and joined by the blend surface. The method is also useful for rapid prototyping and tool path generation if the triangular mesh is tessellated part of the solid models with curved surfaces and sharp edges. The suggested method and previous methods are implemented on a PC using C++ and illustrated using an OpenGL library.

• 한국연소학회:학술대회논문집
• /
• 2000.12a
• /
• pp.236-245
• /
• 2000

A laboratory scale fluidized bed reactor was developed to treat the combustion characteristics of some fuels (wood, paper sludge, refuse derived fuel). The aims were to introduce the means of experiment and interpretation of the results and finally determine the particle characteristics on the pyrolysis and combustion process of the fuel. A single particle combustion process in the fluidized bed was closely observed. Understanding experimental facility characteristics and determining parameters were also carried out. The fuel combustion processes were observed by carbon conversion rate, recovery and mean carbon conversion time. They were estimated with the CO, $CO_2$ gas concentration monitored at the exit of the combustor. Fuel drying and pyrolysis process were governed by temperature distribution in the fuel particle. There was a significant overlap of the drying and devolatilization. However, transition process from devolatilization to char combustion seemed to be determined by mechanical solidity of the fuel particle after devolatilization process.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.311-314
• /
• 2004

The 2 DBPP(Two-Dimensional Bin Packing Problem) is a problem of packing each item into a bin so that no two items overlap and the number of required bins is minimized under the set of rectangular items which may not be rotated and an unlimited number of identical rectangular bins. The 2 DBPP is strongly NP-hard and finds many practical applications in industry. In this paper we discuss a tabu search approach which includes tabu list, intensifying and diversification strategies. The HNFDH(Hybrid Next Fit Decreasing Height) algorithm is used as an internal algorithm. We find that use of the proper parameter and function such as maximum number of tabu list and space utilization function yields a good solution in a reduced time. We present a tabu search algorithm and its performance through extensive computational experiments.