• 한국재료학회지
• /
• 제32권10호
• /
• pp.414-418
• /
• 2022

Magnesium alloy is the lightest practical metal. It has excellent specific strength and recyclability as well as abundant reserves, and is expected to be a next-generation structural metal material following aluminum alloy. This paper investigated the possibility of thin plate fabrication by applying a overheating treatment to the melt drag method, and investigating the surface shape of the thin plate, grain size, grain size distribution, and Vickers hardness. When the overheating treatment was applied to magnesium alloy, the grains were refined, so it is expected that further refinement of grains can be realized if the overheating treatment is applied to the melt drag method. By applying overheating treatment, it was possible to fabricate a thin plate of magnesium alloy using the melt drag method, and a microstructure with a minimum grain size of around 12 ㎛ was obtained. As the overheating treatment temperature increased, void defects increased on the roll surface of the thin plate, and holding time had no effect on the surface shape of the thin plate. The fabricated thin plate showed uniform grain size distribution. When the holding times were 0 and 30 min, the grain size was refined, and the effect of the holding time became smaller as the overheating treatment temperature increased. As the overheating temperature becomes higher, the grain size becomes finer, and the finer the grain size is, the higher the Vickers hardness.

• Advances in Energy Research
• /
• 제5권4호
• /
• pp.277-287
• /
• 2017

This study examines the risk of overheating of a school building, under extreme hot weather conditions, in 14 locations in the United Kingdom using the overheating criteria defined in Building Bulletin 101 (BB101). The building was modelled as naturally ventilated, mechanically ventilated and in mixed mode and was simulated both for the current and the projected weather conditions of the 2050s. Under the current weather conditions, results of the simulations show that when naturally ventilated, the school building fulfils the BB101 criteria only in the areas of Edinburgh and Glasgow. In the simulations of the building as mechanically ventilated and in mixed mode, mechanical cooling was provided in order for the building to comply with the overheating criteria. A comparison of the required cooling loads between the two scenarios shows that application of mixed mode ventilation results in less cooling loads.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.938-941
• /
• 2003

In this paper we develop an equipment which prevents vehicles from overheating their inside due to exposure to direct sunlight in summer. Overheating of inside vehicle may give rise to accidents, for instances, dying from suffocation, the deformation of its internal equipment and the explosion from the cracks of its internal parts etc.. The equipment is operated under no starting engine. We adjust the overheating of the inside vehicle by operating the equipment. This equipment checks the temperature of the inside vehicle using temperature sensor. If the temperature increases more than reference temperature(a condition which can be given by the driver), the equipment will operate until the temperature of the inside decreases to the given temperature. Its power is obtained from solar cell. So the equipment keeps away overheating accidents as well as provides the drivers with optimized condition. And also it increases the ability of original car battery through solar cell.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.119-125
• /
• 2004

Radiant tube heaters are widely used for indirect heating in heat treatment processes such as continuous annealing line(CAL) or continuous galvanizing line(CGL). Main issues for radiant tube are temperature uniformity, lifetime, thermal efficiency. To achieve higher heat release, the radiant tubes are fired at a higher fuel rate and therefore local overheating occur. A numerical simulation based on a commercial code FLUENT has been performed to investigate local overheating of radiant tube heaters. To minimize local overheating, the effects of radiating fins, flue gas recirculation(FGR), two-stage combustion were investigated. More uniform temperature distribution was achieved in the longitudinal direction within the tube with radiating fins and this contributed to increase the life of radiant tubes. Furthermore, the radiant tube with radiating fins was proven to be more efficient than the one without fins. The effects of flue gas recirculation and two stage combustion on the efficiency of the radiant tube were also considered and the results were presented.

• 센서학회지
• /
• 제22권4호
• /
• pp.297-301
• /
• 2013

We proposed and demonstrated a distributed fiber-optic overheating detection sensor using optical time domain refrectometry. With increased of temperature the optical fiber is bended by a bi-metal and it result in optical leaky loss of the fiber. The sensor structure is designed in such a way that the signal of overheating is happen when the temperature exceeding a threshold temperature and the optical fiber is protected from excess bending.

• 한국농림기상학회지
• /
• 제5권3호
• /
• pp.200-207
• /
• 2003

온도기반 생태모형을 경관규모에 적용하기 위해 널리 쓰이는 BioSIM을 우리나라 환경에 도입할 경우 예상되는 문제점을 파악하기 위해 먼저 일 최고기온 추정과정을 검토하였다. 과열지수 대신 사용되는 개방도의 신뢰성을 검증하기 위해 전라북도 순창군 동계면 전역을 대상으로 10${\times}$10m 면적 단위로 총 57만여 개 지점의 개방도를 계산하고, 같은 지점에 대해 추분, 하지, 동짓날의 과열지수를 계산하였다. 각 날짜별 과열지수의 변이를 개방도에 의해 설명하기 위한 2차 회귀식을 작성한 바 회귀식의 결정계수($R^2$)는 동지에 0.44, 하지에 0.50, 추분에 0.56으로 Regniere(1996)의 추정치 0.7-0.9에 비해 크게 낮았다. 따라서 개방도를 사용하여 추정된 복잡지형의 일 최고기온값은 신뢰도가 낮아 생태모형의 구동변수로 부적합하므로 반드시 과열지수를 직접 계산해서 사용해야 한다.

• 한국산학기술학회논문지
• /
• 제18권1호
• /
• pp.609-617
• /
• 2017

철도는 전 세계적으로 매우 안전하고 중요한 운송 수단 중 하나이다. 그러나 철도시스템이 복잡도가 높아지고 주행거리 증가 등으로 인해 매년 사고가 지속적으로 발생하고 있다. 특히, 고속열차와 화물열차의 경우, 차축베어링 비정상 과열로 인하여 차축베어링의 기능이 소실되면 차축의 불균등한 하중을 초래한다. 따라서, 차축베어링의 비정상 과열은 심각한 사고 또는 차량 탈선의 원인이 될 수 있다. 이에 따라서 현재 고속열차 운행 중 차축의 비정상적인 발열을 검지하기 위하여 차축온도검지장치(Hot Box Detector, HBD)가 설치되어 운영되고 있다. 본 연구에서는 비정상 차축 과열 발생시, 이를 빠르고 효율적으로 검지하기 위하여 지수가중이동평균(EWMA) 기법을 적용한 차축온도 모니터링 방법을 제안하였다. 또한 제안한 방법에 대하여 통계적으로 설계하였다. 본 연구에서 제안하는 방법은 현재의 차축온도검지 모니터링 방법과 비교하여 비정상 과열의 발생에 대하여 더 좋은 성능으로 평가되었으며 그 수행도는 최대 170% 향상되었다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권4호
• /
• pp.413-420
• /
• 2013

This paper includes the results of the electromagnetic finite element analysis with regard to overheating problem of the power cable tray due to asymmetric magnetic flux density. This phenomenon was experienced in the utility power plant, Korea. The influences of the power cable arrangements and material of the tray were analyzed to find the best solutions using the eddy current-thermal coupled analysis.

• 설비공학논문집
• /
• 제16권5호
• /
• pp.408-413
• /
• 2004

An experimental study has been carried out to investigate overheating of oil and bearing housing during pump operation. This problem is of particular interest in the pre diction of lifetime and failure of pump. Transient variation of oil temperature as well as bearing housing temperature is measured to study the effect of oil viscosity, oil amount, and discharge flow rate of pump. It is found that optimal oil quantity as well as proper viscosity of oil is required to keep the safe temperature level of oil and bearing housing in a pump. The oil temperature at steady state is almost not affected by discharge flow rate in the range of discharge flow rates considered in the present study.

• 동의신경정신과학회지
• /
• 제11권2호
• /
• pp.155-167
• /
• 2000

After We treated Beriberi disease belonging to the argument of interior-overheating-symptom of the Tae-Eum-In caused by liver's receiving heat due to Seven emotional excess with Constitutional prescription. we had a Significant effect on patient's Character and Beriberi disease. Therefore, if we add some Herbs to Constitutional prescription according to patient's Symptoms. we think we can maximize The Effect and Application of Constitutional prescription.Through this Clinical analysis. We think we need a Systematic study on applying This Principle to more Various diseases.