• Journal of Electrical Engineering and Technology
• /
• 제6권6호
• /
• pp.829-835
• /
• 2011

A power frequency magnetic field reduction method using passive loop is presented. This method can be used to reduce magnetic fields generated within the restricted area near transmission lines by alternating current overhead transmission lines. A reduction algorithm is described and related equations for magnetic field reduction are explained. The proposed power frequency magnetic field reduction method is applied to a scaled-down transmission line model. The lateral distribution of reduction ratio between magnetic fields before and after passive loop installation is calculated to evaluate magnetic field reduction effects. Calculated results show that the passive loop can be used to cost-effectively reduce power frequency magnetic fields in the vicinity of transmission lines generated by overhead transmission lines, compared with other reduction methods, such as active loop, increase in transmission line height, and power transmission using underground cables.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.181-188
• /
• 2000

Input shaping is a method fur reducing residual vibration. Vibration is eliminated by convolving an input shaper, which is a sequence of impulses, with the desired system command. It has been applied to robot with a flexible manipulator. But it can be applied to the reduction of residual vibration far overhead crane. In this paper, input shaping shows good performance for anti-sway of overhead crane. In the z-domain, we designed an input shaper and calculated the sensitivity of it. If sensitivity is calculated in the z-domain, the shapes of sensitivity curves are expected easily. Accordingly, it is easy to design an input shaper in the z-domain. We compared the response of a system with shaper to it without that. Also, we compared El shaper to ZV shaper in view of robustness.

• 한국농공학회지
• /
• 제24권4호
• /
• pp.69-79
• /
• 1982

The objective of this study is to contribute to drainage planning in the most realistic and economical way by establishing the relationship between rice yield reduction and overhead flooding by muddy water of each growth stage of paddy, which is the most important factor in determining optimum drainage facilities. This study was based on the data mainly from the experimental reports of the Office of Rural Development of Korea, Reduction Rate Estimation for Summer Crops, published by Ministry of Agriculture and Forestry of Japan and other related research documenta- tion. The results of this study are summarized as follows 1. Damages by overhead flooding are highest in heading stage and have the tendency of decrease in the order of booting stage, panicle formation stage, tillering stage, and stage just after transplanting. Damages by overhead flooding of each growing stage are as follows: a) It is considered that overhead flooding just after transplanting gives a little influence on plant growth and yield because the paddy has sufficient growth period from floo ding to harvest time. b) Jt is analyzed that according to the equation y=11 12x 0.908 which is derived from this study, damages by overhead flooding during tillering stage for 1, 2, 3 successive days are 11.1 %, 20.9%, and 30.2% respectively. c) Damages by overhead flooding after panicle formation stage are very serious because recovering period is very short after damage and ineffective tillering is much. Acc- ording to the equation y=9. 58x+10. Ol derived from this study, damages by overhead flooding fal 1,2,3,5 successive days are 19.6%, 29.2%, 38.8%, 57.9% respectively. d) Booting stage is the very important period in which young panicle has grown up almost completely and the number of glumous flower is fixed since reduction division takes place in the microspore mother cell and enbryo mother cell. According to the equation y=39. 66x 0.558 derived from this study, damages by overhead floodingfor 0.5, 1, 3, 5 successive days are 26.9%, 39.7%, 72. 2% and 97.4%, respectively. Therefore, damages by overhead flooding is very serious during the hooting stage. e) When ear of paddy emerges, flowering begins on that day or the next day; when paddy flowers, fertilization will be completed 2-3 hours after flowering. Therefore overhead flooding during heading stage impedes flowering and increases sterilizing percentage. From this reason damages of heading stage are larger than that of booting stage. According to the equation y-41 94x 0.589 derived from this study, damages by overhead flooding for 0.5, 1, 3, 5, successive days are 27.9%, 63.1 %, 80.1%, and 100% 2. Considering that temperature of booting stage is higher than that of beading stage and plant height of booting stage is ten centimeters shorter than that of heading stage, booting stage should be taken as a critical period for drainage planning because possi- bility of damage occurrence in booting stage is larger than that of heading stage. There-fore, it is considered that booting stage should be taken as critical period of paddy growth for drainage planning. 3. Overhead flooding depth is different depending on the stage of growth. In case, booting stage is adopted as design stage of growth for drainage planning, it is conside red that the allowable flooding depth for new varieties and general varieties are 70cm and 80cm respectively. 4. Reduction Rate Estimation by Wind and Flood for Rice Planting of the present design criteria for drainage planning shows damage by overhead flooding for 1 to 2, 3 to 4, 5 to 7 consecutive days; damages by overhead flooding varies considerably over several hours and experimental condition of soil, variety of paddy, and climate differs with real situation. From these reasons, damage by flooding could not be estimated properly in the past. This study has derived the equation which shows damages by flooding of each growth stage on an hourly basis. Therefore, it has become possible to compute the exact damages in case duration of overhead flooding is known.

• 한국통신학회논문지
• /
• 제28권2B호
• /
• pp.129-137
• /
• 2003

MPEG(Motion Picture Expert Group)과 같은 멀티미디어 스트림은 연속적 재생으로 인해 데이터의 지속적인 디스크 검색을 요구한다. 따라서, 커널의 효율적인 지원이 필요한데, 유닉스 계열의 리눅스 버퍼 캐시 시스템은 비정기적이고 비실시간 데이터인 텍스트 데이터용으로 설계되었다. 대용량의 연속 미디어의 경우 커널 주소공간에서 사용자 주소공간으로의 대량의 복사가 이루어지므로 이 과정에서 CPU의 과중한 오버헤드가 발생한다. 이것은 시스템 처리율을 저하시킬 뿐만 아니라 QOS(Quality of Service)도 보장할 수 없다. 본 논문에서 이 메모리 복사 오버헤드를 감소시키기 위한 direct I/O와 one copy 기법을 리눅스 커널에서 설계 및 구현하였다. direct I/O는 디스크의 데이터를 커널 버퍼로 복사하지 않고 사용자 버퍼로 직접 복사하므로 CPU 오버헤드를 획기적으로 감소시킬 수 있다. 그리고, one-copy는 사용자 버퍼로 데이터를 복사하지 않고 직접 네트워크로 전송하는 기법이다. 구현 결과, CPU 오버헤드의 상당한 감소와 시스템의 처리율이 향상됨을 확인하였다.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.2027-2034
• /
• 2008

There are concerns on possible health effects from exposure to electromagnetic fields. One reflection of this concerns is the considerable controversy, delay, and cost increases involved in the construction of power lines and facilities. To cope with such challenges, in this paper we investigated magnetic fields reduction techniques such as general compaction, in' span compaction, cruciform, vertical, 3 way splits phase, and 4way splits phase. As results, we found general compaction and 4 way splits phase could reduce magnetic fields up to 90%, while cruciform, vertical, and 3 way splits phase gave lower reduction rates of 30% because these configurations were similar to a current type of low reactance arrangement. We also knew 1 spacer in span compaction was appropriate in Korea in view of effectiveness and economy.

• 정보처리학회논문지C
• /
• 제11C권6호
• /
• pp.815-820
• /
• 2004

인터넷의 고품질 서비스를 제공하기 위한 기술로 MPLS 트래픽 엔지니어링 기술이 대두되고 있다. MPLS 망에서 트래픽 엔지니어링은 서비스 품질을 보장할 수 있는 경로를 계산하고 MPLS 신호 프로토콜을 이용하여 망 자원을 예약하는 기능을 수행한다. MPLS 신호 프로토콜의 하나인 RSVP-TE 프로토콜은 플로우 기반으로 설정된 경로의 연결 상태 관리를 위해 주기적으로 Refresh 메시지를 송수신한다. 이러한 주기적인 메시지의 송수신은 프로토콜 메시지 처리 부하를 증가시키기 때문에 많은 수의 경로 설정 능력을 제한하는 문제점을 유발한다. 본 논문은 이러한 RSVP-TE 프로토콜의 Refresh 메시지의 부하를 줄이기 위하여 제시된 Refresh Reduction 기법의 영향에 대하여 분석한다. 또한, 확장성을 갖는 RSVP-TE 프로토콜을 구현하기 위해서 메시지 부하가 적은 기법을 제안한다.

• 한국통신학회논문지
• /
• 제38B권1호
• /
• pp.26-33
• /
• 2013

저전력, 저가의 초소형 기지국인 펨토셀은 heterogeneous network 의 중요 구성 요소 중 하나이다. 그러나 펨토셀 설치에 따른 셀 구조의 변화는 셀 간 간섭과 signaling overhead 증가와 같은 기술적인 문제를 야기할 수 있다. 이와 같은 기술적인 문제의 해결 방법 중 하나는 펨토셀이 SON(Self-Organized Network)과 같은 기법을 이용하여 자율적으로 전송전력을 조절하는 것이다. 펨토셀은 전송전력 조절을 통해 시스템 throughput을 향상시키거나 overhead를 감소시킬 수 있다. 일반적으로 시스템 throughput을 최대화하기 위한 펨토셀 전송 전력과 시스템 overhead 감소를 위한 펨토셀 전송 전력은 일치하지 않는다. 따라서 본 연구에서는 펨토셀이 시스템 overhead를 감소시키는 동시에 시스템 throughput을 향상시키도록 전송 전력을 조절하는 방법을 제안한다. 모의실험을 통해 제안 기법이 throughput만을 최대화하는 기법에 비하여 시스템 overhead를 41% 감소시키는 것을 확인하였다. 또한 커버리지만을 최적화 하는 기법에 비하여 throughput이 63% 향상되는 것을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.495-498
• /
• 2001

The distribution line through which electricity is supplied from substation to customer generally varies by underground line and overhead line. In contrast that the underground line is shielded, the overhead lines do not have the shield layer. To overcome this weak point of the overhead lines, the aerial bundled cable(ABC) connection systems have been developed. The basic concept of the ABC connection system is the application of the underground cable system containing complete shield layer to the overhead cable system. The ABC system is the innovative technologies which enable the prevention of electric shocks, reduction of the maintenance charge and damage of the cable. This paper give a full detail of vertical connection system applied within a country.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.824-828
• /
• 2007

With increasing interest in the reduction of cost for operation and maintenance of overhead catenary system, various methods of condition monitoring have been developed and used in with high-speed analysis and advanced image processing techniques. This study utilizes a high-speed camera as inspecting system to measure the wear, stagger, hight and arc extinguishing test of overhead catenary system. All measuring image were captured by a high speed CMOS camera with PCI express output, which can acquire up to 1000 frames per second with the resolution 1024 × 1280 pixels. Line type laser source with a power equal to 300 mW and the National Instrument LabVIEW (8.0) based on vision acquisition software have been used in application programming interface for image acquisition, display, and storage. The proposed high-speed camera system is finally applied to measure the overhead catenary system showing promising on-field applications

• 전기학회논문지
• /
• 제58권10호
• /
• pp.1881-1887
• /
• 2009

This paper discusses the effects of ECC (Earth Continuity Conductor) for reducing the level of induced sheath overvoltages at the single point bonded section of combined transmission lines which are mixed underground power cable with overhead line in one T/L. In previous papers, the characteristics of ECC on only underground power cable systems were sufficiently analyzed. However, the result of only underground power cable systems are totally different from that of combined transmission lines because ECC is commonly grounded with overhead grounding wire at mesh of cable head. Therefore, in this paper, the installation effects of ECC have been variously analyzed considering the three kinds of fault positions, cable formation of duct and trefoil, spacing between phase conductor and ECC, and the change of overhead transmission line section length on 154kV combined transmission line. Finally, simulation results show that ECC can effectively reduce the induced sheath voltage.