• Journal of the Korean Data and Information Science Society
• /
• 제14권4호
• /
• pp.889-901
• /
• 2003

In this paper, we consider the optimal replacement policies following the expiration of the combination warranty. The combination warranty can be divided into the renewing combination warranty and the non-renewing combination warranty. The criterion used to determine the optimal replacement period is the overall value function based on the expected cost and the expected downtime. Thus, we obtain the expected cost rate per unit time and the expected downtime per unit time for our model. And then the overall value function suggested by Jiagn and Ji(2002) is applied to obtain the optimal replacement period. The numerical examples are presented for illustrative purpose.

• Journal of the Korean Data and Information Science Society
• /
• 제19권2호
• /
• pp.587-596
• /
• 2008

This paper develops the optimal periodic preventive maintenance policies following the expiration of warranty: renewing warranty and non-renewing warranty. After the warranty period is expired, the system undergoes the PM periodically and is minimally repaired at each failure between two successive PMs. Firstly, we determine the expected cost rate per unit time and the expected downtime per unit time for the periodic PM model. Then the overall value function suggested by Jiang and Ji(2002) is applied to obtain the optimal PM period and the optimal PM number. Finally, the numerical examples are presented for illustrative purpose.

• Journal of the Korean Data and Information Science Society
• /
• 제17권3호
• /
• pp.743-752
• /
• 2006

This paper considers a Bayesian approach to replacement policy model with minimal repair. We use the criterion based on the expected cost and the expected downtime to determine the optimal replacement period. To do so, we obtain the expected cost rate per unit time and the expected downtime per unit time, respectively. When the failure time is Weibull distribution with uncertain parameters, a Bayesian approach is established to formally express and update the uncertain parameters for determining an optimal maintenance policy. Especially, the overall value function suggested by Jiagn and Ji(2002) is applied to obtain the optimal replacement period. The numerical examples are presented for illustrative purpose.

• 한국경영공학회지
• /
• 제23권4호
• /
• pp.87-103
• /
• 2018

This paper introduces the method to develop two main types of the fuzzy OEE (Overall Equipment Effectiveness) models via triangular membership function for measuring uncertainty. The fuzzy OEE includes model type 1 and model type 2. The model type 1 is used when the theoretical machine speed only reflects the time loss whereas model type 2 is used when the actual machine speed reflects both time and speed loss. Model type 2 has shown to perform a lower availability rate and a higher performance rate compared to model type 1. In addition, the fuzzy UPH (Unit Per Hour) which is derived from using the fuzzy OEE is presented to satisfy demand uncertainty. The fuzzy UPH can easily measure the fuzzy tact time and cycle time by reciprocating itself. Finally, this study demonstrates the fuzzy OEE models using IVIFS (Interval-Valued Intuitionistic Fuzzy Set) based on the characterization via membership function, non-membership function and hesitant function. For the purpose of analyzing the fuzzy system OEE, the OEE for each machine of plant structure is considered triangular interval-valued intuitionistic fuzzy number. Regardless of plant structure, the validity degree of fuzzy membership function of system OEE decreases when the number of machine with worst value of the validity degree increases. Corresponding examples are presented in this paper for practitioner to understand the applicability and practicability of the proposed fuzzy OEE methods.

• Communications for Statistical Applications and Methods
• /
• 제15권6호
• /
• pp.909-923
• /
• 2008

본 논문에서는 수리가 가능한 시스템에 대하여 혼합보증이 종료된 이후의 교체모형과 예방보전모형을 고려하는데, 만약 보증기간이 종료된 이후에 시스템에 고장이 발생하면 최소수리를 수행한다. 최적의 교체정책과 최적의 예방보전정책을 결정하기 위한 기준으로는 기대비용과 기대비가동시간에 근거한 총밸류함수를 사용한다. 그리고 시스템의 고장시간이 와이블분포를 할 때 수치적 예를 통해서 제안된 최적의 교체정책 및 예방보전정책을 자세히 설명하고자 한다.

• Structural Engineering and Mechanics
• /
• 제83권6호
• /
• pp.835-851
• /
• 2022

This paper analyzes the variation law of the pipe lateral vibration characteristics, it was treated as a beam model, and was dispersed into several subunits based on the FEM. The corresponding stiffness and mass matrix of the pipe was deduced by using Hermite interpolation function, and the overall dynamic balance equation was established. The lateral vibration under different pipe lengths, thicknesses and towing speeds are solved by integral method. The results show that the pipe vibration trend decreases first and then increases, and the vibration value at the ore bin is larger than that at the pump set, and the value at the top is the largest, and the least value location can change with the length increase. Increasing length and thickness can reduce lateral vibration value, while increasing speed can increase the value. Neither the thickness nor the towing speed will change the location where the least value occurs. The vibration intensity will increase with the decrease of pipe length and thickness and the increase of towing speed.

• 한국습지학회지
• /
• 제20권2호
• /
• pp.190-200
• /
• 2018

본 연구는 공업용수 공급사업에 따른 경제적 가치를 확인하기 위하여 생산함수 접근법에 기반한 한계생산가치를 추정하였다. 이를 위해 Cobb-Douglas, Translog, Sector 더미변수를 포함한 Trasnslog 생산함수를 기준으로 11개 산업유형별로 구분된 4가지 자료세트(Case)를 이용하여 분석하였다. 분석결과, 전 산업 평균 한계생산가치는 각각 3,217~5,357원/ton, 2,994~4,569원/ton, 3,620~5,342원/ton로 나타났으며, 산업유형별 결과는 가구 및 기타제조 산업에서 가장 크게 추정되었고, 섬유 가죽산업에서 가장 낮은 한계생산가치를 보였다. 전체적으로 Cobb-Douglas 함수에 의한 결과가 높게 나타났으며, 자료세트에 따른 변동성 또한 Cobb-Douglas 함수에서 크게 나타났다. 생활용수에 비해 공업용수의 경제적 가치에 관한 연구는 그동안 미흡하였으나, 향후 활발한 연구를 통해 다학제간 합의가 필요할 것으로 판단된다.

• 소음진동
• /
• 제7권1호
• /
• pp.143-152
• /
• 1997

This paper introduces experimental results of the ride qulaity characteristics of automotive seats fixed on the vibration table that is noving simultaneously to the three-axis in a similar way to the real running condition. Vibration experiment was carried out for five different automotive seats and four Korean individuals. The assessment of the ride quality characteristics for each seat and indiviual was made not only from the analysis of vibration measurements but also from the evaluation of weighied vibration signals, which were obtained using the frequency weighting function and the multiplication factor dependent on the position and axis of vibration exposure to wehole-body. The usefulness of those assessment results in analysis of the ride quality of seats is discussed and their limitation is also pointed out in this paper.

• 음성과학
• /
• 제14권2호
• /
• pp.127-135
• /
• 2007

Feature vectors of speech are generally extracted from whole frequency domain. The inherent character of a speaker is located in the low band or high band frequency. However, if the speech is corrupted by narrowband noise with concentrated energy, speaker verification performance is reduced as the individual characteristic is removed. In this paper, we propose a PCA Covariance Model based on the multiband to extract the robust feature vectors against the narrowband noise. First, we divide the overall frequency band into several subbands. Second, the correlation of feature vectors extracted independently from each subband is removed by PCA. The distance obtained from each subband has different distribution. To normalize against the different distribution, we moved the value into the normalized distribution through the mapping function. Finally, the represented value applying the weighting function is used for speaker verification. In the experiments, the proposed method shows better performance of the speaker verification and reduces the computation.

• 한국실내디자인학회논문집
• /
• 제15권1호
• /
• pp.106-112
• /
• 2006

Buildings undergo changes by various factors according as pass at time. Due to that social requests and issues form one common sense of value and this would influence the architect's design intention. In fact, the form and function of buildings have coped with transition of the common sense of value by each times. Hospital architecture is also changed in function, scale and technology since, Kwanghyewon which was the first western style hospital in Korea was established in 1885. It is changing that the social needs for hospital which was a basic function of healing to laying emphasis on the function of precaution. According to this, the change of hospital spaces means that it can promote healing environment which is expanded from the modern concept of isolation, accommodation and urban sanitation. These changed concepts were adopted limited areas in hospitals at first however, nowadays they are expanding to other areas. So, this is caused to make the image of the hospital. From this point of view, Entry space is an example to show the changes. This study is intended to determine the overall space structure of entry area and to classify and analyze the difference.