• 재활치료과학
• /
• 제3권2호
• /
• pp.49-57
• /
• 2014

목적 : 본 연구는 조산아를 대상으로 한 구강자극프로그램 실시가 구강식이수행에 영향을 미치는지를 알아보고자 하였다. 연구방법 : 연구대상은 조산 (25주)로 출생한 아동 1명이었으며, 총 4주간 연구를 진행하였다. 중재방법은 구강자극프로그램으로 뺨, 윗입술, 아랫입술, 윗입술과 아랫입술의 커브, 윗잇몸, 아랫잇몸, 뺨의 내부, 혀의 측면, 혀의 중간을 손가락으로 눌러주며 자극을 주는 9가지 활동으로 구성되었다. 구강식이수행 요인으로는 체중, 하루에 섭취하는 우유의 양, 한 번에 먹는 우유의 양, 한 번 우유 먹을 때 걸리는 시간으로 측정하였다. 각 요인은 매주, 시간에 따른 변화를 측정하였다. 결과 : 중재 실시 후, 대상자의 체중이 증가하였으며 하루에 먹는 우유의 양과 한 번에 먹는 우유의 양도 증가하였다. 한 번 우유를 먹을 때 걸리는 시간은 감소하였다. 결론 : 구강자극프로그램은 조산아의 구강식이 수행을 향상시킬 수 있는 방법이며, 따라서 가정과 치료환경에서 적절히 활용할 수 있을 것이다.

• 한국식품조리과학회지
• /
• 제20권6호
• /
• pp.630-636
• /
• 2004

쌀의 수침시간과 증자시간이 가래떡의 품질에 미치는 영향을 살펴보았다. 쌀의 수침시간이 증가할수록 수분흡수율과 고형분 함량이 증가하였고, 입자크기는 8시간과 10시간 수침한 쌀가루의 입자가 $<40\;{\mu}m$ 크기에서 $75.2\~76.8\%,\;40\~100\;{\mu}m$ 크기에서 $23.2\~24.8\%$로 나타나 수침시간이 길어질수록 제분시 입자크기가 작아졌다. 가래떡을 제조하는데 있어 최적의 수침시간과 증자시간을 알아보고자 살펴본 가래떡의 조직감, 색도, 관능검사에서는 증자시간에 길수록 조직의 경도와 응집성, 검성, 씰힘성 등이 감소하였고, 탄성의 경우 40분 증자하였을 때 가장 높게 나타났다. 색도에서는 증자시간이 길수록 L값을 감소시키고, b값을 증가시켜, 8시간 이상의 수침시간과 40분의 증자시간이 적당한 것으로 나타났다. 또한 관능검사를 통하여 흰색의 강도(whiteness), 경도(hardness), 탄성(spinginess), 씸힘성(chewiness) 및 전반적인 기호도(overall acceptability)를 측정한 결과 8시간의 수침시간과 40분의 증자시간이 최적인 것으로 판단되었다.

• Journal of the Korean Data and Information Science Society
• /
• 제14권4호
• /
• pp.889-901
• /
• 2003

In this paper, we consider the optimal replacement policies following the expiration of the combination warranty. The combination warranty can be divided into the renewing combination warranty and the non-renewing combination warranty. The criterion used to determine the optimal replacement period is the overall value function based on the expected cost and the expected downtime. Thus, we obtain the expected cost rate per unit time and the expected downtime per unit time for our model. And then the overall value function suggested by Jiagn and Ji(2002) is applied to obtain the optimal replacement period. The numerical examples are presented for illustrative purpose.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.792-798
• /
• 2008

공급 사슬망은 최근 학계와 기업에서 매우 큰 관심사로 떠오르며 그 중요성이 강조되고 있다. 통합적으로 관리하고 조망해야 한다는 필요성에 기반하고 있지만 전체적으로 조망하면서 지속적으로 일어나는 변동성을 어떻게 대응하고 준비해야 하는 가에 대해서는 연구가 상대적으로 활발하지 않았다. 본 논문에서는 공급 사슬망의 동적 특성들에는 어떤 것들이 있는지 살펴 보고 이를 통해 적절한 운영 방식을 찾기 위해 준비하였다. 각각 참여 요소(entity)들이 가지고 있는 변동성이 전체에 어떤 영향을 가지고 있는지 전체 소요 시간(Turn Around Time, TAT) 중심의 방법을 제안하였다. 이를 Monte Carlo Simulation 방법을 통해 7개의 인자들로 구성된 공급 사슬망의 사례를 제시하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅲ
• /
• pp.1515-1518
• /
• 2003

This paper suggests the condensed two-stage retrieval method for fast image retrieval in the content-based image retrieval system, and proves the validity of the performance. The condensed two-stage retrieval method reduces the overall response time remarkably while it maintains relevance with the conventional exhaustive search method. It is explained by properties of the Cauchy-Schwartz inequality. In experimental result, it turns out that there is an optimal value of condensation ratio which minimizes the overall response time. We analyze the optimal condensation ratio by modeling a similarity computation time mathematically.

• 제어로봇시스템학회논문지
• /
• 제9권12호
• /
• pp.1001-1008
• /
• 2003

A time-delay compensation method for vector control system is proposed that can compensate for voltage and current distortions resulting from a time delay in the overall system due to the low pass filter, hysteresis control inverter, microprocessor program computation time, and so on. The proposed scheme estimates the time delay using the difference between the Q-axis stator current command and the time-delayed actual Q-axis stator current in a synchronous reference frame, then compensates the time delay in the voltage and current using the angular displacement of a DQ transformation. Accordingly, the proposed scheme can accurately compensate for the time delay related to the overall system, thereby significantly improving the performance of the vector control system, as verified by simulation and experiment.

• 산업공학
• /
• 제12권2호
• /
• pp.346-353
• /
• 1999

In this paper, the optimum drilling operation sequence which results into the minimum overall machining time required to produce a (multi-diameter) hole is identified. The operation sequence is defined as the set of ordered operations used for producing a (multi-diameter) hole. The overall machining time is derived by summing the minimum machining times of each operation assigned to a sequence. The operations represent the drilling actions of certain sizes to produce the related holes. The minimum machining time of each operation is obtained by solving the optimization problem. Finally, this paper will identify the effects of machining constraints on the overall machining times and their relationships to sequence selection.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.231-231
• /
• 2000

It is proposed that a novel method which can compensate the time delay occurs in overall system, when voltage and current is measured, owing to LPF, hysteresis control inverter and microprocessor program computation time. The Proposed scheme estimates the time delay using the difference between Q-axis stator current command and time delayed Q-axis stator current in synchronous reference frame, and compensates the time delay of voltage and current using angular displacement of DQ transformation. The proposed scheme compensates accurately the time delay occurs in overall system. Therefore performance of vector control system is improved highly and it is verified by simulation and experiment.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권5호
• /
• pp.2829-2834
• /
• 2013

The objective was to analyze the radiotherapy (RT) practice at the cancer centre of a tertiary academic medical institution in Delhi. This audit from an Indian public institution covered patient care processes related to cancer diagnosis, integration of RT with other anti-cancer modalities, waiting time, overall treatment time, and compliance with RT. Over a period of one year, all consecutively registered patients in radiotherapy were analyzed for the audit cycle. Analysis of 1,030 patients showed median age of 49.6 years, with presentation as stage I and II in 14.2%, stage III and IV in 71.2% and unknown stage in 14.6%. A total of 974 (95%) were advised for RT appointment; 669 (68.6%) for curative intent and 31.4% for palliation. Mean times for diagnostic workup and from registration at cancer centre to radiotherapy referral were 33 and 31 days respectively. Median waiting time to start of RT course was 41 days. Overall RT compliance was 75% and overall duration for a curative RT course ranged from 50 days to 61 days. Non-completion and interruption of RT course were observed in 12% and 13% respectively. Radiotherapy machine burden in a public cancer hospital in India increases the waiting time and 25% of advised patients do not comply with the prescribed treatment. Infrastructure, machine and manpower constraints lead to more patients being treated on cobalt (74%) and by two-dimensional (78%) techniques.

• 한국축산식품학회지
• /
• 제35권5호
• /
• pp.597-603
• /
• 2015

The purpose of this study was to investigate the influence of processing conditions (temperature and time) and binding agent types (glutinous rice flour, potato starch, bean flour, and acorn flour) on the physicochemical and sensory characteristics of ground dried-pork meat product. For this purpose, ground dried-pork meat product was produced by adding several binding agents at different drying temperatures and times. The drying time affected moisture content and water activity in all drying temperature. However, under the similar drying conditions, the extent of drying varied depending on the type of binding agents. The results of sensory evaluation for texture degree and overall acceptability indicated the following: overall, higher drying temperatures and longer drying time heightened the degree of texture, and the overall acceptability varied depending on binding agent type. Physicochemical and sensory characteristics were analyzed to determine any possible correlation. The results revealed a high correlation between moisture content, water activity, shear forces, and sensory evaluation (p<0.01). However, there was no correlation with respect to overall acceptability.