• Structural Engineering and Mechanics
• /
• 제76권2호
• /
• pp.207-222
• /
• 2020

Due to the rugged terrain, metro lines in mountain city across numerous wide rivers and deep valleys, resulting in instability of high-pier bridge and insecurity of metro train subjected to fluctuating crosswind. To ensure the safe operation in metro lines in mountain cities, running safety of the metro train over the high-pier bridge under crosswind is analyzed in this paper. Firstly, the dynamic model of the wind-train-bridge (WTB) system is built, in which the speed-up effect of crosswind is fully considered. On the basis of time domain analysis, the basic characteristics of the WTB system with high-pier are analyzed. Afterwards, the dynamic responses varies with train speed and wind speed are calculated, and the safety zone of metro train over a high-pier bridge subjected to fluctuating crosswind in mountain city is determined. The results indicate that, fluctuating crosswind triggers drastic vibration to the metro train and high-pier bridges, which in turn causes running instability of the train. For this reason, the corresponding safety zone for metro train running on the high-pier is proposed, and the metro traffic on the high-pier bridge should be closed as the mean wind speed of standard height reaches 9 m/s (15.6 m/s for the train).

• 한국위성정보통신학회논문지
• /
• 제10권3호
• /
• pp.78-83
• /
• 2015

본 논문에서는 새로운 무선 재난통신망인 위성 통신 무선패키지 시스템의 WLAN 중계기가 LTE D2D 이동 단말기와 접속시 인접한 ISM 대역의 WALN 및 WPAN 시스템으로 부터 전파 채널 간섭을 Monte-Carlo 기반으로 분석을 하였다. 본 연구에서는 실 환경을 고려 Extended Hata Model을 이용하여 WLAN Cell Radius를 구하고, 동일 채널에서 간섭원인 WLAN, Bluetooth, ZigBee로 부터의 간섭을 최소화 하기 위한 물리적 보호 이격 거리와 Dense Mode에서 밀도를 시뮬레이션 하였다. 시뮬레이션 결과 WLAN 중계기는 인접 WLAN과는 130m 이상 보호 이격 거리에서 15개의 간섭 기기와 운용 될 수 있고, Bluetooth와는 100m 이상 보호 이격 거리에서 23개의 간섭 기기와 운용 될 수 있으며, ZigBee와는 83m 이상에서 62개 간섭 기기와 운용 가능 함을 확인 하였다.

• Current Optics and Photonics
• /
• 제1권5호
• /
• pp.468-473
• /
• 2017

We determined the feasibility of a fishing camera system using an optical fiber as the fishing line by testing a power-over-fiber (POF) module and multimode optical fiber. Operation of the remote camera module (RCM) without the battery was preferred because the removal of the charging or battery replacement section enabled a waterproof single-body type design. The average efficiency of the photovoltaic power converter (PPC) in the tested POF module was 32.6% at 820 nm, and thus, a high-power laser of at least 1.27 W was required for operating the developed RCM with an electrical dissipation of 413 mW. Because the optical fiber was wound on a fishing reel, composite loss composed of bending and tensile loss occurred. To mitigate the composite loss, we employed a simple holder that showed an improvement in the composite loss of 0.38 dB to 0.8 dB, which was considerably better than the losses without the holder.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.704-706
• /
• 1996

This paper presents a new algorithm of unit commitment for optimal operation in power system. The proposed method developed algorithm that determined generators considering load variations at each stages. It has established forecast unit commitment over time horizon at first and next calculated quality cost of generators and then committed generator that has minimum quality cost at unit commitment schedule over time horizon. It is used that Objet-Oriented Programming for effective realization, and simple handling of complex program. The proposed method has applied at example system and the results has shown superior economics and computational requirement than the conventional method.

• Animal Bioscience
• /
• 제36권2호
• /
• pp.322-332
• /
• 2023

Objective: We determined the impact of maintaining pasture-based dairy cows and calves together over 100 days on cow milk production, cow and calf behavior, and calf liveweight and carcass quality. Methods: Six Holstein-Friesian cows and their male calves were monitored for 106±8.6 days. Cows were temporarily separated twice a day for milking with calves remaining in the paddock. Cow and calf behaviors were recorded via scan sampling at 6 different timepoints, for the first 7 days and twice a week thereafter. Calves were weighed weekly and immediately processed for meat quality and rumen development analysis at 106±8.6 days. Daily cow milk yields were collected from enrollment until 109±8.6 days (3 days post-weaning). Results: The average daily gain of calves was 1.4±0.73 kg/d, with an average carcass dressing percentage of 59%. Calves had the greatest frequency of observed close proximity to cow and suckling in the first two weeks and decreased with experiment duration. During separation for milking, cow vocalizations and attempts to return to their calf decreased over time. Reticulorumen weight was on target for calf age, but as a proportion of total stomach weight was lower than industry averages of calves the same age due to the larger abomasum. Cows produced an average of 12±7.6 kg of milk yield per day over the 3-days before the calves were weaned and increased to mean of 31±8.3 kg/d the 3 days after weaning, indicating a consumption of close to 20 kg per calf per day. Conclusion: The impact of a pasture-based cow-calf rearing system on cow and calf behavior and the potential for high levels of calf liveweight gain when provided ad-libitum milk and feed were determined. Further research is required to determine the practicality of replicating such systems with large herds and impact on reared calves post-weaning.

• 한국농공학회지
• /
• 제32권E호
• /
• pp.80-87
• /
• 1990

Energy balance equations Were developed to describe the heat transfer mechanisms in a double layer plastic greenhouse with a water curtain system. Heat transfer variables were determined by using various temperature data measured in a conventional prototype semicircular cross-section greenhouse over a range of water temperatures and water flow rates. The heat transfer coefficient between flowing water and greenhouse air was independent of water flow rates. But the heat transfer coefficient between water surface and the stagnant air space within the double plastic layer was dependent on water flow rates. Substituting the heat transfer coefficients, determined from the energy balance equations in the heat transfer equations, demonstrated various relationships among ambient air temperature, greenhouse air temperature, water temperature, and water flow rates. The heating benefits were linearly related to not only the inside and outside air temperatures but also to the water temperature. The energy conservation effects of the water curtain system were found even initial water temperatures were considerably lower than the greenhouse setting temperatures. Sensitivity analysis for heat transfer coefficients demonstrated that the heat transfer coefficient between greenhouse air and the stagnant air within the plastic layers was the most significant coefficient in the estimation of heating effects.

• 한국CDE학회논문집
• /
• 제19권2호
• /
• pp.148-156
• /
• 2014

Generally, over 95% of manufacturing cost is determined in the design and manufacturing preparation step, especially a great part of productivity is determined in the manufacturing preparation step. In order to improve the manufacturing competitiveness, we have to verify the problems that can be occurred in the production step and remove the unnecessary factors in the manufacturing preparation step. Thus, manufacturing industries are adopting digital manufacturing system based on modeling & simulation. In this paper, we introduce e-FEED system (electronic based Front End Engineering and Design) that is the integrated design and analysis system for optimized manufacturing line development based on simulation automation and explain the work process (Design, Analysis and Optimization) about manufacturing line development using e-FEED system. Also, the effect is described through the real implementation cases.

• 한국환경과학회지
• /
• 제33권7호
• /
• pp.511-522
• /
• 2024

The optimal yield is defined as the amount of groundwater that maintains a dynamic equilibrium state of the groundwater system over a long period. We examined the current problems, improvements, and methods for estimating the optimal groundwater yield in Korea, considering sustainable groundwater development. The optimal yield for individual wells and the sustainable yield for the entire groundwater basin were reviewed. Generally, the optimal yield for individual wells can be determined using long-term pumping and step drawdown tests. The optimal yield can be determined by groundwater quantity and quality, economic, and water use rights factors. The optimal yield of individual wells in the groundwater basin must be determined within the total sustainable amount of the entire groundwater basin, such that the optimal yield of a new well must be less than the remaining total sustainable amount, exempting the total optimal yield of the existing wells. Therefore, the optimal yield may be determined based on the estimated optimal yield at least twice per year. In addition, if groundwater level and pumping quantity data for at least one year are available, it may be effective to use the Hill, Harding, and zero groundwater-level change methods to re-estimate the optimal yield.

• International Journal of Contents
• /
• 제6권4호
• /
• pp.49-56
• /
• 2010

In this paper we present a system that enables the user to interact with large display system even without touching the screen. With two infrared sensitive cameras mounted on the bottom left and bottom right of the display system pointing upwards, the user fingertip position on the selected region of interest of each camera view is found using vertical intensity profile of the background subtracted image. The position of the finger in two images of left and right camera is mapped to the display screen coordinate by using pre-determined matrices, which are calculated by interpolating samples of user finger position on the images taken by pointing finger over some known coordinate position of the display system. The screen is then manipulated according to the calculated position and depth of the fingertip with respect to the display system. Experimental results demonstrate an efficient, robust and stable human computer interaction.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.539-542
• /
• 2003

In South Korea, flooding is controlled with large or small reservoirs scattered spatially over the territory. Because recent unexpected hard-rain events requires more flood control capacities, the pre-release system is considered with the most economical alternative. In this case time and volume of discharge should be determined by the simulation. But, existing pre-release simulation system has the problem of specificity. Therefore, GASS is considered to estimate the pre-release time and volume with different configurations of pre-release system. This paper shows that pre-release simulation system could be constructed with arranging GASAtmosphere, GASWatershed, Reservoir, Gate components using GASS. It is also shows that GASS could be used as a foundation for constructing pre-release simulation system that is easy to use and is flexible to reflect the changing configurations of reservoir systems.