• 한국광학회지
• /
• 제8권1호
• /
• pp.26-30
• /
• 1997

서로 수직으로 편광되고 두개의 종모우드로 발진하는 주파수가 안정화된 He-Ne 레이저를 이용하여 넓은 측정 범위를 갖는 헤테로다인 간섭계를 구성하였다. 두 모우드 사이의 맥놀이 주파수인 684MHz에 대한 라디오 주파수 간섭을 이용하여 약 .+-.1.74.mu.m의 분해능으로 광학매질의 광학두께를 측정할 수 있는 장치를 구성하였다. 이와 같은 측정장치를 이용하여 Nd:YAG 레이저의 수동형 Q-스위칭에 포화흡수체로 사용되고 있는 유기염료 박막의 두께와 국부적인 광학두께의 변화에 대한 map을 구할 수 있었다.

• Current Optics and Photonics
• /
• 제1권5호
• /
• pp.505-513
• /
• 2017

Measuring the thickness of thin films is strongly required in the display industry. In recent years, as the size of a pattern has become smaller, the substrate has become larger. Consequently, measuring the thickness of the thin film over a wide area with low spatial sampling size has become a key technique of manufacturing-yield management. Interferometry is a well-known metrology technique that offers low spatial sampling size and the ability to measure a wide area; however, there are some limitations in measuring the thickness of the thin film. This paper proposes a method to calculate the thickness of the thin film in the following two steps: first, pre-estimation of the thickness with the phase at the peak position of the interferogram at the bottom surface of the thin film, using white-light phase-shift interferometry; second, accurate correction of the measurement by fitting the interferogram with the theoretical pattern through the estimated thickness. Feasibility and accuracy of the method has been verified by comparing measured values of photoresist pattern samples, manufactured with the halftone display process, to those measured by AFM. As a result, an area of $880{\times}640$ pixels could be measured in 3 seconds, with a measurement error of less than 12%.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.186-192
• /
• 2022

Flow accelerated corrosion (FAC) is a type of pipe corrosion in which the pipe thickness decreases depending on the fluid flow conditions. In nuclear power plants, FAC mainly occurs in the carbon steel pipes of a secondary system. However, because the temperature of a secondary system pipe is over 150 ℃, in situ monitoring using a conventional ultrasonic non-destructive testing method is difficult. In our previous study, we developed a waveguide ultrasonic thickness measurement system. In this study, we applied a waveguide ultrasonic thickness measurement system to monitor the thinning of the pipe according to the change in pH. The Korea Atomic Energy Research Institute installed FAC-proof facilities, enabling the monitoring of internal fluid flow conditions, which were fixed for ~1000 h to analyze the effect of the pH. The measurement system operated without failure for ~3000 h and the pipe thickness was found to be reduced by ~10% at pH 9 compared to that at pH 7. The thickness of the pipe was measured using a microscope after the experiment, and the reliability of the system was confirmed with less than 1% error. This technology is expected to also be applicable to the thickness-reduction monitoring of other high-temperature materials.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권5호
• /
• pp.413-422
• /
• 2022

In this study, 230 subjects of medical examination were investigated to figure out the relationship with common carotid artery intima-media thickness and cardiac diastolic function. In addition, the change in the carotid artery intima-media thickness according to the presence or absence of metabolic syndrome was examined. As a result of the study the carotid artery intima-media thickness was thick as the age increased and there was a large difference in those in their 60s and over. There was no gender difference. As for metabolic syndrome the carotid artery intima-media thickness was thicker in the study subjects with high blood pressure diabetes and dyslipidemia. The correlation between the carotid artery intima-media thickness and diastolic function indexes was significant. As a result of hierarchical regression analysis the thicker the intima-media thickness in the carotid artery the lower cardiac diastolic function.

• 대기
• /
• 제16권2호
• /
• pp.85-96
• /
• 2006

The six-year (2000~2005) record of aerosol optical thickness (AOT or $\tau$) data from the Moderate Resolution Imaging Spectroradiometer (MODIS) was analyzed over the Northeast Asia. The MODIS AOT standard products (MOD04_L2) over both ocean and land were collected to evaluate the spatial and temporal variability of the atmospheric aerosols over the study region ($32^{\circ}N{\sim}42^{\circ}N$ and $115^{\circ}E{\sim}133^{\circ}E$). The monthly averaged AOT result revealed slight changes(${\pm}0.002{\tau}/month$), which was almost unchangeable, over Korea. In contrast, the large AOT values (> 0.6) and a significant AOT increase (> 0.004 ${\tau}/month$) over East China were observed. For the analysis of spatio-temporal variability of AOT values, study area was divided by six sectors (I: North-East China, II: East China, III: Yellow Sea, IV: Korea Peninsular, V: East Sea, and VI: South Sea and Western part of Japan). The considerable result showed that particularly high AOT contribution was observed over sector I (32.5%) and II (25.5%) where some major urban and industrialized areas and agricultural fields are located and other cases were observed 13.2%, 14.6%, 7.1%, 7.0% over sector III, IV, V, and VI, respectively. In addition, yearly AOT changes based on seasons are observed differently at each sector but increasing trends reveal in summer and fall over all sectors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1388-1390
• /
• 1995

The characteristic of dielectric breakdown in solid insulating material dominates the reliability and safety of power equipment and affects directly to its life. In this point of view, the thickness and temperature dependence of dielectric breakdown strength and mechanism of dielectric breakdown in low density polyethylene which has been employed widely as insulating material have been technically reviewed by examinations of thermal property. The dielectric breakdown strength depending on its thickness was measured 2.6[MV/cm] at the thickness of 20[${\mu}m$] and 1.9[MV/cm] at the thickness of 75[${\mu}m$] based on ambient temperature of 30[$^{\circ}C$]. It is shown the temperature dependence that dielectric breakdown strength decreases in linear as the thickness increases. The dielectric breakdown strength depending on temperature was measured 2.6[MV/cm] at the temperature of 30[$^{\circ}C$], 1.6[MV/cm] at 60[$^{\circ}C$] and 1.3[MV/cm] at 90[$^{\circ}C$] based on the thickness of 20[${\mu}m$]. As the ambient temperature increases, the temperature dependence is shown that a very large drop is occurred up to temperature of 60[$^{\circ}C$] and a very small drop is discovered over 60[$^{\circ}C$].

• 한국소음진동공학회논문집
• /
• 제22권12호
• /
• pp.1250-1256
• /
• 2012

Resilient materials are used to reduce the floor impact sound in apartment buildings. Since an on-dol layer is installed in the resilient materials' upper part, thickness deformation can be occur in the resilient material. It is necessary to check a thickness deformation grade for a long period of time. In this research, we measured thickness deformation over 400th day to the resilient materials(EPP, EPS, EVA) which is used in Korea. Although there was a difference according to the kind of measurement test specimens, it became clear that thickness was decreases as to time increased. The thickness deformation grade of ten years after was calculated based on the thickness measurement result. Compare with the calculated result and result of ISO 20392. Larger thickness deformation occurred in the measurement result of these research findings compare with the ISO standard.

• Archives of Plastic Surgery
• /
• 제32권5호
• /
• pp.607-612
• /
• 2005

A traditional tie-over dressing may be applied to support the take of a skin graft. Although there are many advantage of this method, it has significant disadvantages, including time-consuming application. Furthermore, when the dressing is changed, the gauze becomes hard and can be stuck to the graft, causing damage and pain upon removal. The purpose of our study is to evaluate the effect of semi-occlusive dressing using polyurethane foam and film dressing($Allevyn^{(R)}$, $Opsite^{(R)}$) after full thickness skin graft. The authors treated 45 cases including burn scar contracture(n=38), syndactyly (n=1), absence of nipple-areolar complex(n=4), traumatic skin defect(n=1) and contact burn(n=1) with authors' method and 39 patients including burn scar contracture (n=39) with the tie-over dressing between 2000 and 2004. The patients in polyurethane foam and film dressing group ranged from 1 to 62 years of age (mean age, 15.1 years) and the patients in tie-over dressing group ranged from 2 to 60 years of age(mean age, 21.3 years). The postoperative results were analyzed according to the following measures: (1) the duration of graft-taking, (2) the admission period, (3) complications. Compared with the traditional tie-over dressing, polyurethane foam and film dressing was shown to be more successful in a reduced duration of graft-taking, in which was similar to the former in the rate of graft-taking, a reduced admission period and patient's discomfort. We concluded that semi-occlusive dressing using $Allevyn^{(R)}$ and $Opsite^{(R)}$ was an effective method after full thickness skin graft, which was easy to shape to difficult body locations, such as web spaces, fingers and maintains a moist environment for wound healing and does not stick to the wound.

• 대기
• /
• 제26권2호
• /
• pp.289-299
• /
• 2016

Optical properties of aerosols associated with haze events over Seoul were examined using ground-based skyradiometer and satellite-borne CALIOP and MODIS measurements over the 2009~2010 period. It is shown that aerosol optical thickness (AOT), ${\AA}ngstr{\ddot{o}}m$ exponents (${\alpha}$), and fine-mode particles increase during the haze events. The CALIOP-measured vertical profiles of aerosol during the haze events revealed that most of aerosols are loaded within layers below 4 km altitude. A large portion of these events appear to be related to the long-range transport of aerosols from China; about 35% and 18% of the haze events observed over Seoul were traced back to northern China and southern China, respectively. Compared with optical properties for locally-induced haze events (25%), these long-range transported aerosols are found to have relatively higher AOTs.

• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.95-100
• /
• 2018

This study has focused on the weld-line and birefringence reduction of a plastic optic lens using over and CAE analysis in injection compression molding. A concave lens, which has a thin thickness in the center and a large difference in thickness between the center and the periphery, often causes weld-line defects during injection molding. CAE analysis has been applied to optimize the overflow design in order to reduce the weld-line defects and the polarization defects. To reduce the weld line and birefringence defects, overflow design and application using CAE analysis show that the measured birefringence values of the specimens before the overflow application were 46.8nm and 36.9nm, and the values after the over-flow application were 13.6nm and 14.0nm. From the experimental results, it is confirmed that birefringence is greatly improved when overflow is applied.