• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.11
• /
• pp.1564-1567
• /
• 2001

Hydrolysis of plant protein to non-protein nitrogen (N) or ammonia can reduce quality of silage crops. Heating or non-enzymatic browning is a treatment to inhibit this hydrolysis. This experiment was conducted to examine the effects of pre-heated soybean meal and molasses on the fermentation quality of napiergrass silage. The initial growth of napiergrass was harvested at 85 days of age and immediately chopped into about 1 cm length. About 700 g of the grass was ensiled into a laboratory silo (1.0 liter polyethylene container) and incubated for 30 days at room temperature ($28^{\circ}C$). No additives (control), molasses, soybean meal and molasses + soybean meal treatments were prepared. All additives were non-heated or heated in an oven at $150^{\circ}C$ for 30 minutes before ensiling. Molasses was added at 3% on the fresh weight basis and soybean meal was added at 0.5% N, respectively. After opening the silo, pH, total nitrogen (TN), volatile basic nitrogen (VBN), lactic acid (LA), acetic acid (AA), butyric acid (BA) and dry matter (DM) contents were determined. The data were analyzed statistically by analysis of variance. Compared with control, molasses addition significantly decreased pH value, VBN/TN, AA and BA and increased LA production. Soybean meal addition significantly increased TN and VBN/TN of silage. Both molasses and soybean meal addition significantly reduced pH value, AA, and BA and increased DM and LA contents of silage. The heating of additives was only effective to reduce VBN/TN production compared with non-heated additives in soybean meal and soybean meal with molasses addition.

• Analytical Science and Technology
• /
• v.10 no.6
• /
• pp.418-426
• /
• 1997

Dewatered digested sewage sludge were heated with microwave and their drying characteristics were investigated on the effect of their surface area, shape, diameter and thickness. The drying characteristics of identical samples in a conventional drying oven were studied. In conventional drying, constant rate period was not found and moisture was evaporated with capillary action. Moisture in the sludge was a bound water and free water was not exist. In microwave drying, the falling rate period was divided into two zones. In falling rate drying period, moisture movement occured by diffusion. The evaporation surface area was a significant variable, the greater heating surface area promoted water removal rate over wide region of water content. Drying rate was slow and constant rate drying period was found in wide moisture content region with increasing diameter. Drying characteristics appeared differently in various shape. In microwave heating, first of all temperature of sludge center was increased and was the highest. Temperature in the constant rate drying period was remained constantly at $80{\sim}100^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.54-61
• /
• 1999

A study was conducted to find a rapid thawing method which prevents excessive drip loss and local overheating. Effects of thawing methods (conventional thawing vs. 2,450 and 915 MHz microwave thawing) on thawing time, temperature profile, drip loss, water holding capacity, total color difference and total aerobes were investigated. Samples were thawed at 4, 28 and $50^{\circ}C$ in a refrigerator or an oven for the conventional thawing methods the convertional thawing methods. Power levels of 5, 10 and 15 kW were used for 915MHz microwave thawing. Cotreatment of 915 MHz microwave and convectional heating $(120^{\circ}C)$ was tested. 915 MHz microwave accelerated the thawing rate, and showed significant effects on penetration depth, drip loss, water holding capacity and total aerobes. Cotreatment of 915 MHz microwave and convection heating was appeared to be a suitable thawing process for the food industry.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.7
• /
• pp.17-30
• /
• 2023

This study investigates the impact of water immersion and high temperature on the shear strength of cemented sand through direct shear tests. Standard Jumunjin sand was used and cemented with binders, such as ultra-rapid hardening cement and an epoxy aqueous solution. The binder was mixed at concentrations of 4%, 8%, or 12%. Subsequently, cylindrical cemented specimens with a diameter of 64 mm and height of 25 mm were produced using compaction. The curing period was three days, and the specimens were cured under dry air, immersion, and heating conditions. The heating condition involved subjecting the immersed specimens to a microwave oven three times for three minutes to achieve an internal temperature of approximately 90℃. Regardless of the binder type, the cohesion of the cemented sand increased with higher binder content, whereas the internal friction angle exhibited a slight increase or decrease. Compared with ultra-rapid hardening cemented sand, epoxy-cemented sand displayed an average cohesion that was five times higher and an internal friction angle that was 10° higher. Overall, irrespective of binder type, the shear strength decreased during water immersion and increased during heating. Notably, the epoxy-cemented sand exhibited a three-fold increase in cohesion and a more than 20° increase in the internal friction angle during heating.

• Journal of Food Hygiene and Safety
• /
• v.12 no.2
• /
• pp.125-131
• /
• 1997

Gulbi, salted and dried yellow corvenia, is a favorite diet food in Korea from the ancient times. A Few studies have dealt with sanitary concerns related to its products, while a number of investigators studied its taste compounds. This study attemps to establish the basic data for ensuring the safety of Gulbi. The contents of nitrate and nitrite were detected 1.2 and <0.1 mg/kg in raw sample, but their contents were detected 3.6~3.9 and 1.2~2.0 mg/kg during its processing and storage of Gulbi, respectively. TMAO contents decreased while betaine, TMA, DMA and formaldehyde increased in yellow corvenia during its processing and storage. Recovery from raw, salted, salt-dried and stored sample spiked with 10$\mu\textrm{g}$/kg for NDBA was 83.2~102.7% average 92.7%). N-nitrosamine such as NDMA, NDEA and NDPA was not detected in raw sample and drastically increased during Gulbi processing and storage. The levels of NDMA, NDEA and NDPA in Gulbi stored for 30 days were about 2.7,4.5 and 5.3 times higher than those in salted sample, respectively. Regardless of cooking methods, NDMA, NDEA and NDPA during cooking when sample were cooked using direct heating methods such as a gas and a briquet fire than when sample were cooked using indirect methods such as an microwave oven and a fried pan. Indirect cooking methods was effective to minimize the N-nitrosamine formation such as NDMA, NDEA and NDPA during cooking of Gulbi.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.99-106
• /
• 2016

Our aim was to identify the potential of reed stalk as a raw materials for biomass pellet production. Compared to woody biomass, reed stalk contained significant levels of ash. The holocellulose content of reed stalk was similar to that of larch, but the lignin content of reed stalk was lower than that of larch. In the elemental analysis, chlorine content of reed stalk was much higher than that of larch, and satisfied only the mixed biomass pellet B of European non-woody pellet standards(EN 14961-6). In quantitative analysis of the ash, heavy metals contents of reed stalk satisfied European non-woody pellet standards. Higher heating value of oven-dried reed stalk pellet was slightly lower than that of larch wood pellet. The durability of reed stalk pellet was lower than that of larch wood pellet. The results of this study indicate that reed stalk might be used as a raw material of mixed biomass pellet B.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.3
• /
• pp.58-66
• /
• 2010

The Annals of beeswax applied-Joseon Dynasty have some serious damages such as cracks, brown, red or black spots, and discolorations by chemical and biological degradation, but others without any beeswax application have still been keeping good quality during over several hundred years. It would be convinced that the beeswax applied in the Annals resulted in these deteriorations. Therefore, in order to focus on the aging mechanism and conservation techniques for the beeswax-applied Annals of Joseon Dynasty, the beeswax applying and dewaxing techniques of Hanji were tried by auto bar coater with a hot plate, and by heat-pressure sensitive extracting treatments. The ageing behaviors of beeswaxed Hanji and dewaxed Hanji were investigated by measuring the changes of physical, optical, morphological, and chemical properties, through accelerated ageing treatment in dry oven at $150^{\circ}C$ during 48 hours. Consequently, the ageing actions of beeswaxed Hanji were even faster than that of Hanji. The optimum dewaxed amounts from beeswaxed Hanji was also obtained in pressure of $40\;kg_f$ under heating conditions.

• Journal of the Korean Society of Safety
• /
• v.25 no.1
• /
• pp.32-37
• /
• 2010

When back-out & firing Process applies heat, hume is piled up in exhaust duct by organic compound and it have high dangerousness. There by, the process is happening a lot of damage that is exhaust duct fire. However we do not have certain fire dangerousness estimation and digestion countermeasure. So we need preventive measure. Back-out & firing is a process which has fine structure, electrical and mechanical characteristics, such as firing kiln and back-out kiln which has pipe line and box type. The box oven is made of heating coil, fan motor and control panel. Back-out & firing process has air circulation institution of quick ventilation type. When we operate this process for long time, fire can break out easily. Duct is made by zinc shredder. If fire breaks out in duct inside, fire by deposit fume can be dispersed easily. Accordinglym, This project estimate danger for back-out & firing process exhaust duct through real fire test. And there is purpose of study to establish preventive measure.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.11
• /
• pp.690-695
• /
• 2016

Induction cooktop has a great attention due to its safety, quick heating and cleanness compared to gas oven. However, the materials for induction cookware is limited to steel or stainless-steel which has the magnetic property. Recently, it has been tried to apply various porcelain to induction cookware after printing the silver layer on the bottom of cookware plates and co-firing at high temperature. Glass frits are added in the silver paste to improve an adhesion force between porcelain materials containers and transferred silver layer. The hybrid silver pastes for induction cookware requires the proper electrical resistance and the thermal conductivity with base plates. After sintering process at $800^{\circ}C$, a part of melted glass migrated to the porcelain and the rest of the glass frit was exposed to the surface. It was confirmed that most of the glass frit formed an adhesion layer between the porcelain and transferred silver layer that enhances the adhesion force.

• Journal of Environmental Science International
• /
• v.25 no.3
• /
• pp.417-424
• /
• 2016

The objective of this study was to evaluate the microwave drying characteristics of mixtures of chemical wastewater sludge (70~90%) and anthracite coal (10~30%) with respect to physical and economic factors such as mass, volume reduction, moisture content, drying rate and heating value when the wastes were dried at different weight mixing ratio and for different microwave irradiation time. The drying process were carried out in a microwave oven, the combined drying process with a 2,450 MHz frequency and 1 kW of power. Maximum dry rates per unit area on the microwave drying of mixtures with chemical wastewater sludge and anthracite coal were $35.5kg\;H_2O/m^2{\cdot}hr$ for Cs90-Ac10; $40.1kg\;H_2O/m^2{\cdot}hr$ for Cs80-Ac20 and $35.0kg\;H_2O/m^2{\cdot}hr$ for Cs70-Ac30. The result clearly indicated that moisture can be effectively and inexpensively removed from the wastes through use of the microwave drying process.