• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.344-349
• /
• 2007

NaY zeolites synthesized by microwave heating were compared with those obtained by conventional heating. When the same temperature increasing rates were adopted in both heating methods, the microwave heating shortened the induction period and enhanced the rate of crystallization of NaY zeolites compared with the conventional heating. Irrespective of microwave radiation, the fast temperature increasing rate also shortened the induction time and enhanced the crystallization of NaY zeolites. The crystal sizes of NaY zeolites were large under the fast temperature raise of the reaction mixture and became larger by microwave radiation. At the same time, the fast temperature increasing rate has reduced the energy consumption due to the fast completion of reaction during the synthesis of NaY zeolite. The energy consumption in the conventional ethylene glycol bath was lower than that in the microwave oven with the same temperature increasing rate in this study, which means that the energy efficiency is not always high in microwave heating. If the temperature increasing rate is carefully controlled, however, NaY zeolite can be produced with high energy efficiency in the microwave oven.

• Composites Research
• /
• v.33 no.2
• /
• pp.55-60
• /
• 2020

A study on the heating behavior and adhesion property of structural epoxy adhesive through induction heating have been conducted. An adhesive for induction heating was manufactured through mixing with nano and micro sized Fe₃O₄. From the results, it was observed that induction heating is less affected by adherend (GFRP) thickness than oven heating. The heating rate of Fe₃O₄ embedded epoxy adhesive using induction heating much higher than that of oven curing process and it is more appreciable when the contents of Fe₃O₄ increased. Furthermore, adhesion strength increased with increase of Fe₃O₄ particle contents.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.7
• /
• pp.1172-1177
• /
• 2004

This paper describes a output power control of magnetron for microwave oven. Magnetron is used extensively in household microwave oven and industrial microwave heating devices it is operated by 3000[V]～5000[V] dc high voltage. Power supply for driving magnetron is consisted of a bridge rectifier. HB(half bridge) inverter, full wave rectifier and gate drive circuit. In proposed system. we confirm that line input power can be controlled extensively and linearly to 24.56[%] by change of duty ratio of inverter through a experiment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.853-858
• /
• 2008

The structures of induction heating type pressure rice cooker are consisted of oven. top heater plate and locking ring. Because the pressure is applied to their structures, those should be necessary to do the safety evaluation. In this paper, structure analysis is performed for oven structures by using finite element method and as a results, optimal thickness is achieved. Especially, analysis fur anisotropic layered material is performed because oven is made of both stainless steel and aluminum. And both von Mises and Tsai-Wu failure criterion are applied for safety factor. Parametric method is used in order to get the optimal thickness for oven and top heater plate.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.1
• /
• pp.84-94
• /
• 2010

Physico-chemical analysis and sensory test of loin of lamb were carried out by four different methods such as grilling, pan-frying, oven-roasting and boiling. The crude fat content was all the same at three cooking methods except boiling. The moisture content was not different among grilling, pan-frying and oven-roasting. Hunter's color L-value(lightness) was lowest at grilling method. However, the heating loss appeared greatly at grilling. The hardness of the lamb-loin after cooking showed big differences with the control except boiling treatment. Amino acids in fillet contained highly in the order of glutamic acid > aspartic acid > cystein. The grilling showed a good value not only color of a sensory test but also the appearance. The oven-roasting cooking gave the tenderness and juiciness. The oven-roasting method showed good sensation to overall taste. Therefore, the oven-roasting (at $150^{\circ}C$ for 9 minutes) was suggested as the superior method when the loin of lamb is cooked for reducing off-flavour.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1541-1547
• /
• 2008

Because of good taste and quick cooking, the induction heating type pressure rice cooker is widely used. Since pressure is applied to oven structure, it should be necessary to check the safety evaluation. In this paper, strain gauge experiment is performed in order to evaluate the oven's strain and its result is compared with that of structural analysis. And water test is performed to evaluate the oven's permanent deformation. The result is also compared with that of structural analysis. By using these experiments and analyses the safety evaluation method of the oven is suggested.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.5
• /
• pp.756-762
• /
• 2006

The objective of this study was to define the effects of various cooking and re-heating methods (pan roasting, steaming, oven grilling and micro-waving) on the cholesterol and formation of cholesterol oxidation products in beef loin during storage at $4^{\circ}C$. Raw samples showed lower total cholesterol content than cooked products sampled during storage for 6 d. The following cholesterol oxidation products (COPs) were separated by gas chromatography: $7{\beta}$-hydroxy cholesterol, $20{\alpha}$-hydroxy cholesterol, 25-hydroxy cholesterol, cholestane-$3{\beta}$, $5{\alpha}$, $6{\beta}$ triol (triol), ${\alpha}$-epoxide and 7-ketocholesterol. Total amounts of COPs/cholesterol at 0 d were 0.74, 0.63, 0.76, 1.23 and 0.83% for the raw sample, pan roasting, steaming, oven grilling and micro waving methods, respectively. After 6 d storage almost of the samples had higher content of total COPs than at 0 and 3 d; the lowest (0.55%) COPs was found in the steaming cooking and re-heating method. The highest (5.96%) of COPs was found in the pan roasting cooking and re-heating method after 6 d storage. In conclusion, the concentration of total cholesterol and cholesterol oxidation of beef loin were increased as a consequence of cooking and re-heating methods. Steaming and micro-waving methods showed the lowest of cholesterol oxidation products under refrigerated storage for 6 d. However, each cooking and re-heating method had its own distinctive cooking effects.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.2
• /
• pp.234-241
• /
• 1995

Effect of microwave heating on the oxidative stability of the soybean oil, sesame oil, butter and margarine were investigated by mearsuring fatty acids amout and tocopherol losses. The index for chemical properteis, free fatty acid, peroxide value, anisidine value, carbonyl value, conjugated diene and triene levels were also mearsured in the oil samples for 5, 10, 15 and 20 min of heating in a microwave oven. No significant difference was observed on the fatty acids composition in the fats and oils before and after microwave heating. During microwave treatment, the oxidative degradation of the tocopherols in the samples became greater with increasing heating time. The amount of tocopherols in the soild fats, butter and margarine, dropped drastically after 5 min of heating and reduced to 95% of their original levels after 20min heating ${\gamma}$-tocopherol in butter showed the most unstable states and completely destroyed during microwave treatment for 20min. On the other hand, 80% of tocopherols in the liquid oils were still remained after 5min of heating except $\delta$-tocopherol in sesame oil.

• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.155-159
• /
• 1983

Alpha-barley were prepared by means of soaking, heating, and drying treatment. The degree of gelatinization ${\alpha}-barley$ were determined. The yield of ${\alpha}-barley$ prepared by microwave heating, steaming, and autoclaving were in the range of 95-98%, whereas by boiling, only 74-89% of ${\alpha}-barley$ were obtained. The degree of gelatinization of ${\alpha}-barley$ prepared by 5 min microwave heating and 10 min and 20 min steaming were around 90%. Alpha-barley prepared by boiling, autoclaving and 30 min steaming showed above 95% of degree of gelatinization.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.10
• /
• pp.43-53
• /
• 2012

This study deals with the conventional consolidation methods like preloading and vertical drains. For it, Two different mechanism, i.e., increasing of permeability and evaporating of pore water were studied. The marine clays excavated in Incheon were heated at low temperature($90^{\circ}C$) to increase the permeability. Also, Microwave oven and high-temperature electric heater were used for pore water evaporation. Several points raised from the experiments. To fix them, the electric heating system was revised to upgrade the field application and drain efficiency of pore water, and the marine clays were heated by revised electric heater at high temperature($250^{\circ}C$). From Experimental result showed that results, high-temperature heater induced the pore water evaporation and displayed the excellent consolidation behavior. In addition, the cone index of heated clays were increased about 19 times, which suggested that electric heating system could be applied for ensuring the trafficability of heavy equipments.