• 한국작물학회지
• /
• 제51권spc1호
• /
• pp.251-254
• /
• 2006

작약의 지상부인 잎과 줄기 부위가 함유하고 있는 주요성분인 paeoniflorin, methyl gallate, astragalin, kaempferol 등 4종의 화합물의 이용성을 높이기 위해 건조방법 및 건조 온도별 성분의 함량 변화를 검토한 결과를 요약하면 다음과 같다. 1. 건조방법별 성분 변화는 kaempferol, methyl gallate, astragalin, paeoniflorin 등 모든 성분은 열풍건조나 dry oven 보다도 원적외선 건조 또는 상온 음건에서 더 높았다. 특히 methyl gallate는 상온 음건에서 0.52%로서 가장 높았다. 2. 건조온도별 성분변화는 kaempferol, methyl gallate, astragalin, paeoniflorin 등은 $40^{\circ}C$ 건조에서는 성분의 함량이 모두 높게 나타났으나 건조온도가 높아질수록 성분은 감소하는 경향이었다.

• KSBB Journal
• /
• 제14권5호
• /
• pp.561-565
• /
• 1999

Optimum conditions for vacuum-drying ad cultivation of yeast cells for the production of active dry yeast were examined. At lower temperature, more drying time was required to dry the yeast pellet to reach the desirable water content(8%). Optimum temperature of vaccum oven and time for drying was 63$^{\circ}C$ and 90 min, respectively. Optimum medium composition for flask culture using cane molasses as the substrate were 0.25% sugar, 0.013% $K_2$HPO$_4$, 0.1% $K_2$HPO$_4$. and 0.125% (NH$_4$)$_2$SO$_4$. Culture temperature $25^{\circ}C$ gave the highest survival rate of dired yeast. After finishing fed-batch culture and the culture was left in the fermentor without adding any sugar or nutrient, survival of the dried yeast harvested from the fermentor increased to 86.0% after 36 hr. It was also observed that the yeast cells with higher budding rates showed lower survival rate.

• 한국지구과학회지
• /
• 제38권2호
• /
• pp.150-160
• /
• 2017

암석의 공극률을 산출하기 위해서는 일반적으로 한국암반공학회에서 정하고 있는 '암석의 공극률 및 밀도 측정 표준시험법'이 사용된다. 그러나 건조로를 이용하여 공극률을 구하는 이 같은 표준시험법은 8-24시간이 소요될 뿐만 아니라, 실험 도중 4시간 간격마다 시료를 꺼내어 무게를 측정해야 하는 번거로움이 있다. 이와 같은 단점을 보완하기 위해 본 연구에서는 마이크로웨이브 오븐을 이용하여 암석의 공극률을 측정하는 방법을 제안하였다. 마이크로웨이브 오븐에 무게 모니터링 시스템을 구축하여 무게 측정의 오차 발생 요인과 실험 과정의 번거로움을 줄였다. 건조과정에서 시료의 온도를 $105{\pm}3^{\circ}C$ 이내로 유지하기 위해 적절한 가열/휴지시간을 설정하였으며, 시료의 무게 변화량이 최초 무게의 0.1% 이내에 들면 모니터링을 중단할 수 있도록 알람 시스템도 구현하였다. 무게 모니터링 데이터에 곡선접합을 실시하여 시료의 건조무게를 구하고, 이를 이용하여 공극률을 산출하였으며, 이렇게 구한 공극률을 표준시험법으로 구한 공극률과 비교하였다. 사암을 이용해 실험한 결과, 마이크로웨이브 오븐으로 구한 공극률은 표준시험법으로 구한 공극률과 최대 0.4%의 오차를 보여 표준시험법의 결과와 유사하였다. 또한 동일 시료를 이용하여 공극률을 반복 측정한 결과, 표준편차가 최대 0.23% 정도로 정밀도 또한 양호하였다. 따라서 마이크로웨이브 오븐을 사용할 경우 높은 신뢰도로 공극률 산출이 가능할 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제15권2호
• /
• pp.113-119
• /
• 1987

A study was conducted to determine the kiln drying schedule for hydrid aspen, This kiln drying schedule was found by oven drying method and developed by pilot testing of 2.0cm, 2.5cm, 3.0cm-thick green lumber. The results of this study were as follows: 1. Kiln drying schedule developed by oven-drying method was $T_{12}-E_5$ for 2.5cm-thick green lumber. 2. Drying times for 2.0cm-thick green lumber(127.0 percent moisture content) to 7.3 percent moisture content, for 2.5cm-thick green lumber(95.0 percent moisture content) to 9.7 percent moisture content, and for 3.0cm-thick green lumber(118.5 percent moisture content) to 10.0 percent moisture content were 45 hours, 45 hours, and 54 hours, respectively. 3. Drying rate from 90 to 10 percent moisture content of 2.5cm-thick lumber was about 0.7 times faster than that of 2.0cm-thick lumber and about 1.1 times faster than that of 3.0em-thick lumber. 4. End checks for 2.0cm-, 2.5cm-, and 3.0cm-thick green lumber occurred 95, 74 and 100 percent moisture content, respectively and reached maximum amount in 53, 41, and 60 percent moisture content, respectively. 5. No surface check and no honeycomb occurred. 6. Cupping and collapse slightly occurred and the quality of dry lumber was first.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 춘계학술발표논문집
• /
• pp.882-884
• /
• 2009

본 연구는 주형의 형상에 관계없이 균일한 건조성능을 가지는 장치의 도입을 목적으로 Microwave를 이용한 주형건조장치 개발을 위한 기초 연구에 관한 것이다. 건조 성능의 검토를 위해 진공건조기와 Lab-scale의 Microwave 출력장치를 가지는 Microwave oven을 이용하여 주물사의 무게별, 건조시간별 건조효율을 검토하였으며, $CO_2$주형법에서 물유리의 양과 $CO_2$통기시간에 따른 주형의 압축강도를 측정하였다.

• 한국식품과학회지
• /
• 제52권5호
• /
• pp.503-509
• /
• 2020

The present study investigated the effects of dry and moist heat treatments on total phenols, total anthocyanins, and antioxidant activity levels in black chokeberry (Aronia melanocarpa) fruits. Lyophilized chokeberry powder samples were heated in a drying oven at 60, 100, 160, 180, and 200℃ for 20, 40, or 60 min. Finely ground fresh chokeberry fruits were heated in water at 60, 80, and 100℃ for 20 min, and bioactive compound and antioxidant activity levels were measured. The bioactive compounds and antioxidant activity decreased with increasing temperature and treatment duration. Antioxidant activity was preserved at 160℃ or lower without significant loss for dry heating, whereas moist heat treatment increased both bioactive compounds and antioxidant activity with increasing temperature.

• 한국공작기계학회논문집
• /
• 제17권6호
• /
• pp.111-117
• /
• 2008

An automation process of filter unit is presented for the application of the assembling procedure and dry furnace work. By that automation procedure, it is expected to enhance working environment such as reducing laboring load, harmful gas, and burning scald. Furthermore, this automation process also minimizes via standardization of manufacturing process so that it may increase productivity and reliability. An automation process of filter unit is presented for the application of the assembling procedure and dry furnace work. Filter automation process also gives a good quality and productivity by simplifying to only one line from the complicated process such as filter cutting$\rightarrow$ adhering$\rightarrow$fabricating in a very small space. It is found that a new conceptual design of dry furnace shows the better quality like uniform heat distribution compared to the conventional design. It is also found that the present design gives a better working environment by adding cooling system.

• 한국수산과학회지
• /
• 제10권3호
• /
• pp.145-149
• /
• 1977

Thermal resistance of dried bacterial spores against dry heat was determined. Spare suspensions of Bacillus subtilis var. niger ATCC 9372, Bacillus stearothermophilus Oxoid Code BR 23 and Clostridium sporogenes ATCC 19404 were located on aluminium strips, dried in electric oven under vacuum at room temperature for 10 minutes. The aluminium strips were laid in the middle of gas flow (hot air and superheated steam) with the velocity of 6 m/sec and heated at $120^{\circ}C$ for 180 seconds. The calculated D-values showed that there were no remarkable differences in the heat resistance of bacterial spares between $R.H.\leqq0.012$ and R. H.=0.51. Furthermore the thermal resistance of B. subtilis spores to dry heat was greater than that of B. stearothermophilus.

• 한국농공학회논문집
• /
• 제54권3호
• /
• pp.47-54
• /
• 2012

As a large construction such as highway, dam, reclaimed land etc. increase in number more and more, large amount of fill materials are required. It is needed to utilize a gypsum which is a by-product yielded from chemical plants, as fill materials. Though some studies have been conducted to know a engineering characteristic of gypsum, it is not certain that water contents were checked at $45^{\circ}C$ dry oven. This study proposed that water contents must be measured at $45^{\circ}C$ dry condition because gypsum is changed to other types as a dry temperature. As the results obtained by compaction tests, it is found that moisture of gypsum in compaction must be within -5.0~2.5 % O.M.C (optimal moisture content).

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권2호
• /
• pp.293-300
• /
• 2018

Objective: This study observed the effects of cooking method and final core temperature on cooking loss, lipid oxidation, aroma volatiles, nucleotide-related compounds and aroma volatiles of Hanwoo brisket (deep pectoralis). Methods: Deep pectoralis muscles (8.65% of crude fat) were obtained from three Hanwoo steer carcasses with $1^+$ quality grade. Samples were either oven-roasted at $180^{\circ}C$ (dry heat) or cooked in boiling water (moist heat) to final core temperature of $70^{\circ}C$ (medium) or $77^{\circ}C$ (well-done). Results: Boiling method reduced more fat but retained more moisture than did the oven roasting method (p<0.001), thus no significant differences were found on cooking loss. However, samples lost more weight as final core temperature increased (p<0.01). Further, total saturated fatty acid increased (p = 0.02) while total monounsaturated fatty acid decreased (p = 0.03) as final core temperature increased. Regardless the method used for cooking, malondialdehyde (p<0.01) and free iron contents (p<0.001) were observed higher in samples cooked to $77^{\circ}C$. Oven roasting retained more inosinic acid, inosine and hypoxanthine in samples than did the boiling method (p<0.001), of which the concentration decreased as final core temperature increased except for hypoxanthine. Samples cooked to $77^{\circ}C$ using oven roasting method released more intense aroma than did the others and the aroma pattern was discriminated based on the intensity. Most of aldehydes and pyrazines were more abundant in oven-roasted samples than in boiled samples. Among identified volatiles, hexanal had the highest area unit in both boiled and oven-roasted samples, of which the abundance increased as the final core temperature increased. Conclusion: The boiling method extracted inosinic acid and rendered fat from beef brisket, whereas oven roasting intensified aroma derived from aldehydes and pyrazines and prevented the extreme loss of inosinic acid.