• Journal of the Korean Society of Food Culture
• /
• v.18 no.5
• /
• pp.437-442
• /
• 2003

This study was conducted to confirm the effect of drying method on quality of popped rice for making salyeotgangjung(popped rice lump with malt syrup) in process of drying gelatinized rice. The drying were performed at dry oven or convection oven, at $30^{\circ}C,\;50^{\circ}C\;and\;105^{\circ}C$, respectively. There were not significant differences in the hardness of popped rice among the drying methods. The dry at $30^{\circ}C$ constant in dry oven showed higher popping rate, good external surface, uniformed and well developed internal cell size. The dry at $30^{\circ}C$ in convection oven and $50^{\circ}C$ constant temperature in dry oven showed low expansion and poor external surface, respectively. In conclusion, the drying at $30^{\circ}C$ in non-convection oven had the highest quality of popped rice for salyeotgangjung.

• Computers and Concrete
• /
• v.8 no.4
• /
• pp.389-399
• /
• 2011

The increasing concern for reinforced concrete structure durability has been justifying in many ways in the last few decades. However, there is no perfect durability test method till now. In this research an alternative method, which is based on the cumulative moisture loss percent of the concrete specimens after oven-drying, was proposed to estimate the durability performance of the concrete. Two temperatures were considered for the oven-drying tests: $100^{\circ}C$ and $200^{\circ}C$. Test results showed that oven-drying at $200^{\circ}C$ was obviously an unsuitable procedure to preserve the fragile microstructure of cement-based materials. By contrast, experimental results through oven-drying at $100^{\circ}C$ allowed estimating the moisture loss percent of cement-based materials in a more rational manner. Moreover, the magnitudes of the cumulative moisture loss percent obtained from oven-drying tests at $100^{\circ}C$ for 48 hours have good correlations with the data of other well-known methods, namely, electrical resistance test, water permeability test, and mercury intrusion porosimetry test. This investigation established that regarding the oven-drying test as one of the tests for evaluating the potential durability of concrete is considerably practicable.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1429-1434
• /
• 2009

Recently electronic circuit pattern printing technologies like antennas of RFID process are paid attention. oven drying system is being used since drying and curing time of RFID Tag Gravure printing normally takes from 5 minutes and up to 30 minutes long. In this case the parental material which is of a sheet shape is possible, however, for a massive and a continuous production drying and curing process must be done on-line. This research compared and analyzed the an oven type drying device and a traditional hot-air drying device. Considering the experiment result, the cell depth that shows low resistivity, which doesn't consider the pattern difference, is $31{\sim}33{\mu}m$. Also, oven drying system showed some resistivity after around 120 seconds of drying time, and showed much better performance in minimum resistivity compared to the hot-air drying system.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.4
• /
• pp.16-24
• /
• 2001

Conventional hot-air oven-drying method takes at least four hours to determine the moisture content of wood sample and this method is not always acceptable to wood industry. In this study samples of six different specifications from Paulownia coreana, Pinus densiflora and Quercus acutissima were dried in domestic microwave oven to their oven dry weights to investigate the possibility of rapid moisture content determination technique using microwave-oven drying method. Continuous heating time, cooling time and intermittent heating time were determined by each species and sample specifications. Temperatures of surface and center of samples were also measured during drying. Oven-drying times were reduced to 1/7~1/10 of conventional hot-air oven-drying method. Therefore microwave heating and drying techniques appear attractive for wood industry as a rapid moisture content determination method.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.5
• /
• pp.5-12
• /
• 2011

Water content is one of the significant engineering properties of soil for predicting the behavior of soil matrix. Conventional drying oven can be widely used to obtain the values by drying the soil specimens for 16 to 24 hours at $105^{\circ}C$. Although a number of experimental data has been accumulated for the conventional method of drying soil for water contents, shortcomings of the method are still hard to overcome such as long drying time for in situ use and the difficulty of taking prompt actions against emergency cases. Recently, ASTM and JGS have established microwave oven drying techniques for obtaining water contents to cope with those problems. And the reliability evaluation study has been also performed on the microwave oven drying for water contents. Feasibility study of the microwave oven drying was performed to confirm the process of the technique with Jumunjin sand, kaolinite, bentonite, weathered granite soil, and organic soil. Investigation was also conducted on the factors affecting and enhancing the reliability of the technique.

• Journal of the Korean Wood Science and Technology
• /
• v.9 no.3
• /
• pp.24-30
• /
• 1981

This experiment was carried out to determine the drying time from green to oven dry and estimate the moisture content of wood, such as red lauan (Shorea Spp.), Douglas fir (Pseudotsuga menziesii), Birch (Betula platyphylla), and oak (Quercus aliena), at various thickness, paralleled to fiber, of specimen for M.C. by oven dry method (100-105$^{\circ}C$). The results obtained are summarized as follows: 1. The drying time from green to oven dry decreases as the thickness of specimen for M.C. becomes to be thined, and that time at 10mm thickness are 14 hrs, for birch wood and 24 hrs, for oak wood. 2. The relative formulae between thickness (X) of specimen for M.C. and drying lime (Y) from 12% to oven dry are showed in Fig. 3. 3. The M.C. based on the weight of specimen for M.C. at t% can be obtained from the formula (2), and the drying time to 1% are shorter than that time to oven dry by approximately three times.

• Journal of Nutrition and Health
• /
• v.8 no.4
• /
• pp.27-32
• /
• 1975

This investigation was designed to determine the influence of drying methods on the chemical changes in red pepper. Three different drying methods were employed: 1) Sun-drying at $25{\sim}28^{\circ}C$ for 15 days, 2) Drying in oven at $60^{\circ}C$ for 49 hours, and 3) Drying in oven at $90^{\circ}C$ for 8 hours. Dried and ground peels were used for the analysis of carotenoid pigments, capsaicin, and vitamin C. The results were as follows; 1. The total carotenoid content of sun-dried sample was more significantly in creased about 4% than that of the fresh sample, but both samples dried in oven were decreased about 30%. Among carotenoid groups, diol-polyol group was chiefly increased, and both samples dried in oven were decreased in the same trend; $17{\sim}18%$ reduction was found in hydrocarbons and monols and $36{\sim}38%$ was in diol-polyols. 2. In Capsaicin content in red pepper, the sun-dried sample was increased about twice of that of the fresh sample and both samples dried in oven were also tended to increase. 3. High reduction of vitamin C content was found in each treatment; 76% for the sun-dried and 89% for the oven-dried samples, respectively.

• The Korean Journal of Food And Nutrition
• /
• v.22 no.2
• /
• pp.192-198
• /
• 2009

Cheongkukjang is a traditional fermented soybean food in Korea that is used in the manufacture of functional foods. This study was conducted to assess vitamin contents and sensory qualities of powdered Cheongkukjang dried by oven drying, far-infrared drying and freeze drying. Vitamins $B_1$, $B_2$, $B_6$, E, niacin and pantothenic acid were detected using all drying methods. However, vitamin D was not detected in the oven drying samples, and was most prevalent($82.47{\mu}g$/100 g) in the far-infrared drying samples. The sensory characteristics included color, off flavor, salty taste, bitter taste, sweet taste, roasted taste and after-taste. Oven drying and freeze drying samples exhibited highest and lowest color scores(5.62 and 2.0, respectively). Oven drying samples also exhibited the highest roasted taste score(4.76), although not significantly different from far-infrared drying samples(4.0, p<0.05), while the score of freeze drying samples(2.38) was significantly different from the other methods(p<0.05). It is concluded that freeze drying is most suitable.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.2
• /
• pp.152-157
• /
• 2000

In order to select the optimum drying method for the production of cinnamon extract, water extract and 70% ethanol extract of cinnamon were prepared. And then several drying method of oven drying, vacuum evaporation, spray drying and freeze drying were performed. Content of cinnamic acid, cinnamic aldehyde, eugenol, tannin and free sugar, and antioxidant activity, degree of browning, pH, color value, turbity and solubility were compared. In water extract, contents of cinnamic acid, cinnamic aldehyde, eugenol were 29.45mg/100g, 94.86mg/100g, 120.75mg/100g and decreased to 4.76%∼44.21%, 5.30%∼48.05%, 3.66%∼21.83% by oven dyring, vaccum drying, spray drying respectively, but freeze drying showed a little decrease of those components. In 70% ethanol extract, effectual components decreased to 76.05%∼88.38% and 26.86%∼78.76% by freeze drying and vacuum evaporation respectively. Antioxidant activity decreased by drying and decreasing rate in 70% ethanol extract was lower than water extract. Degree of browning increased as the drying temperature increased. Tannin and free sugars were little affected by drying temperature. Solubility decreased in oven drying and 70% ethanol extract. Overall data suggested that optimum drying methods of cinnamon extract were freeze drying in case of water extract and freeze drying and vaccum drying in case of 70% ethanol extract.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.51-58
• /
• 2020

As interest in lunar exploration increases, studies on lunar surface environment simulation including a lunar soil simulant are being conducted. One of the problems when creating a vacuum environment with lunar soil is that it takes long time to reach high vacuum due to outgas from the soil. Most of the outgas is water, and the time to reach high vacuum can be significantly reduced by a pretreatment process that removes moisture adhering to the surface of the lunar soil before putting soil into a vacuum chamber. The existing soil drying methods were examined to determine how these methods were effective to remove moisture from the lunar simulant soil. Drying experiments of lunar soil samples were carried out using a dry oven, a microwave oven, direct heating method and a vacuum oven, and the results of the drying experiment were presented. Drying soil at 110℃ using a dry oven and drying soil by a microwave oven were not enough to remove moisture, and vacuum oven drying method and direct heating drying method at more than 200℃ were effective in water removal.