• 한국생산제조학회지
• /
• 제20권6호
• /
• pp.805-810
• /
• 2011

Recently, Use of Auxiliary power unit(APU) is increasing by growing demand for improvement of insufficient electric power and installation of emergency generation devices in military tracked vehicles and civil markets. And the trend is that the units are demanded for smaller size, lighter weight and higher output power, etc to suit consumer demands. To achieve these, it is essential to develop high performance system. Therefore, in this study, it was conducted in numerical analysis to investigate flow characteristics of rotor in APU generator. Also output performance of APU applied on the rotor is analyzed by experimental method. As the result, higher rotating speed of rotor caused high air flow rate at suction and it leads to linear increase of discharging flow rate. The maximum theoretical power was achieved at 12 $m^3$/min of flow rate and, at that time, output power of generator was about 7.825 kW. Also, it can be confirmed the stabilization of output performance is achieved in about 2 seconds by experiment.

• 기술혁신학회지
• /
• 제7권2호
• /
• pp.325-349
• /
• 2004

This paper tried to evaluate an economic analysis about research and development far areas of renewable resource in Korea. To evaluate this validity, we tried to calculate the spillover effect of R＆D investment through input-output table. In the first stage of spillover effect, we simply calculate the rate of return on R＆D investment for renewable energy resources in Korea through the input-output model, which can calculate the value added as well as output based upon the price of 2000 year. According to the first stage calculation, the rate of return on R＆B investment in solar heat is higher than any other renewable energy. In the second stage we tried to calculate the second round of spill over effect, which derives from the additional amount of supply of renewable resources due to the R＆D investment. The overall evaluation of R＆D invesment including the first stage as well as second stage spillover effect shows that bio-energy and waste energy generate 14 times as well as 2.5 times in the rate of return respectively.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제20권3호
• /
• pp.129-135
• /
• 2020

Background: Postoperative fluid retention is a factor that causes delay in recovery and unexpected adverse events. It is important to prevent intraoperative fluid retention, which is putatively caused by intraoperative release of stress hormones, such as ADH (anti-diuretic hormone) or others. We hypothesized that intraoperative analgesia may prevent pathological fluid retention. We retrospectively explored the relationship between analgesics and in-out balance in surgical patients from anesthesia records. Methods: Anesthetic records of 80 patients who had undergone orthognathic surgery were checked in this study. Patients were anesthetized with either TIVA (propofol and remifentanil) or inhalational anesthesia (sevoflurane and remifentanil). During surgery, acetated Ringer's solution was infused for maintenance at a rate of 3-5 ml/kg/h at the discretion of the anesthetist. The perioperative parameters, including the amount of crystalloid and colloid infused, and the amount of urine and bleeding were checked. Furthermore, we checked the amount and administration rate of remifentanil during the surgical procedure. The correlation coefficient between the remifentanil dose and the in-out balance or the urinary output was analyzed using the Pearson correlation coefficient. The contributing factor to fluid retention, including urinary output, was statistically examined by means of multivariate logistic regression analysis. Results: A significant positive correlation was found between remifentanil dose and urinary output. Urinary output less than 0.04 ml/kg/min was suggested to cause positive fluid balance. Although in-out balance approaches zero balance with increase in remifentanil administration rate, no contributing factor for near-zero fluid balance was statistically picked up. The remifentanil administration rate was statistically picked up as the significant factor for higher urinary output (> 0.04 ml/kg/min) (OR, 2,644; 95% CI, 3.2-2.2 × 10⁶) among perioperative parameters. Conclusions: In conclusion, remifentanil contributes in maintaining the urinary output during general anesthesia. Although further prospective study is needed to confirm this hypothesis, it was suggested that fluid retention could be avoided through suppressing intraoperative stress response by means of appropriate maintenance of remifentanil infusion rate.

• International Journal of Knowledge Content Development & Technology
• /
• 제12권4호
• /
• pp.67-94
• /
• 2022

The paper aims to present a comparative analysis of scholarly research output in the fields of Library and Information Science (LIS) in India and South Korea. The Web of Science database was used to retrieve the bibliographic data of the Indian and South Korean LIS published documents during 2001-2020 and the indicators were included in the analysis: research productivity, publication-quality, most prolific authors, institutions and journals, "Annual Growth Rate (AGR)", "Compound Annual Growth Rate (CAGR)", "Relative Growth Rate (RGR)", and "Doubling Time (DT)". All types of documents such as articles, conference papers, book reviews, corrections, editorial materials, so on were included in the study. MS Excel, VOS viewer, and bibliometrix (R-tool) software were used for tabulation and mapping. The results show that South Korea placed the top in the overall output of LIS research publications during the last two decades. The Indian LIS research output, Annual Growth Rate (AGR), and Compound Annual Growth Rate (CAGR) were good compared to South Korean LIS publications. In addition, the South Korean LIS researchers' output has increased rapidly in terms of publications, citations, average citations. Gangan Prathap (India), Seyoung Lee, and Heejin Lee (SK) are the most prolific authors; Indian Institute Technology, Delhi and Yonsei University, Seoul are the most prolific institutions; and the Scientometrics journal was the most preferred journal by the Indian and South Korean LIS researchers during the study period. The results of this study are useful to administrators, policymakers, and academics. In addition, the scope of this study might include looking at research published by LIS scholars in India and South Korea, as well as examining all types of academic publications.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.999-1002
• /
• 1997

In this study, in order to set ELID conditions in the internal grinding wheel, the characteristics with the variations of grit size, output voltage and peak current were examined by using conventional machining center(M/C) equipped with electrolytic in-process dressing(EL1D). The initial working voltage was lowered and the working current was high with increasing grit size. The insulating layer thickness increased, as the final voltage increased with the output voltage and peak current. The initial wear rate of the wheel machined with ELID were measured indirectly by using surface roughness tracer. The initial wear rate of the wheel with ELID increased along with high grit size. In case that the grit size with ELID was low, the output voltage and peak current had to be increased to increase the insulating layer thickness. In case of the high grit size, the output voltage and the peak current were established low, which made the insulating layer thickness decreased.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅲ
• /
• pp.1239-1242
• /
• 2003

The neural networks are a famous model to learn the nonlinear function or nonlinear system. The main point of neural network is that the difference actual output from desired output is used to update weights. Usually, the gradient descent method is used for the learning process. On training process, if learning rate is too large, neural networks hardly guarantee convergence of neural networks. On the other hand, if learning rate is too small, the training spends much time. Therefore, one major problem in use of neural networks are to decrease the teaming time while neural networks are guaranteed convergence. In this paper, we suggest the model of fuzzy logic to neural networks to calibrate learning rate. This method is to tune learning rate dynamically according to error and demonstrates the optimization of training.

• Current Optics and Photonics
• /
• 제7권6호
• /
• pp.732-737
• /
• 2023

A high-power Yb-doped femtosecond (fs) fiber laser at a repetition rate of 1.83 GHz is reported. By employing a 5-stage repetition rate multiplier, the repetition rate of the mode-locked master oscillator was multiplied from 57.1 MHz to 1.83 GHz. The ultrashort pulse output at 1.83 GHz was amplified in a two-stage Yb-doped fiber amplifier, leading to >100 W of fs laser output with a pulse duration of 290 fs. The theoretical pulse width along the fiber was simulated, showing that it was in good agreement with experimental results. Further improvement in power scaling is discussed.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2406-2412
• /
• 2015

Multi-user multi-input multi-output (MU-MIMO) system has attracted the 4^th generation wireless network as one of core technique for performance enrichment. In this system rate control is a challenging problem and another problem is optimization. Proper scheduling can resolve these problems by deciding which set of user and at which rate the users send their data. This paper proposes a new multi-parameter based scheduling (MPS) for downlink multi-user multiple-input multiple-output (MU-MIMO) system under space-time block coding (STBC) transmissions. Goal of this MPS scheme is to offer improved link level performance in terms of a low average bit error rate (BER), high packet delivery ratio (PDR) with improved resource utilization and service fairness among the user. This scheme allows the set of users to send data based on their channel quality and their demand rates. Simulation compares the MPS performance with other scheduling scheme such as fair scheduling (FS), normalized priority scheduling (NPS) and threshold based fair scheduling (TFS). The results obtained prove that MPS has significant improvement in average BER performance with improved resource utilization and fairness as compared to the other scheduling scheme.

• The Journal of Asian Finance, Economics and Business
• /
• 제5권1호
• /
• pp.5-9
• /
• 2018

Many developing countries have attempted to depreciate their currencies in order to make their products cheaper, stimulate exports, shift aggregate demand to the right, and increase aggregate output. However, currency depreciation tends to increase import prices, raise domestic inflation, reduce capital inflows, and shift aggregate supply to the left. The net impact is unclear. The paper incorporates the monetary policy function in the model, which is determined by the inflation gap, the output gap, the real effective exchange rate, and the world real interest rate. Applying an extended IS-MP-AS model (Romer, 2000), the paper finds that real depreciation raised real GDP during 1997.Q1-2005.Q3 whereas real appreciation increased real GDP during 2005.Q4-2017.Q2. In addition, a higher government debt-to-GDP ratio, a lower U.S. real federal funds rate, a higher real stock price, a lower real oil price or a lower expected inflation rate would help increase real GDP. Hence, real depreciation or real appreciation may increase or reduce aggregate output, depending upon the level of economic development. Although expansionary fiscal policy is effective in stimulating the economy, caution needs to be exercised as there may be a debt threshold beyond which a further increase in the debt-to-GDO ratio would hurt economic growth.

• 한국시뮬레이션학회논문지
• /
• 제8권4호
• /
• pp.1-8
• /
• 1999

This paper proposes an ATM switch architecture called Output Queued Batcher-Banyan switch (OQBBS). It consists of a Sorting Module, Expanding Module, and Output Queueing Modules. The principles of channel grouping and output queueing are used to increase the maximum throughput of an ATM switch. One distinctive feature of the OQBBS is that multiple cells can be simultaneously delivered to their desired output. The switch architecture is shown to be modular and easily expandable. The performance of the OQBBS in terms of throughput, cell delays, and cell loss rate under uniform random traffic condition is evaluated by computer simulation. The throughput and the average cell delay are close to the ideal performance behavior of a fully connected output queued crossbar switch. It is also shown that the OQBBS meets the cell loss probability requirement of $10^{-6}$.