• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.1
• /
• pp.13-20
• /
• 2003

Both MgO and $Sc_2O_3$ are shown to provide low interface state densities (in the $10^{11}{\;}eV^{-1}{\;}cm{\;}^{-2}$ range)on n-and p-GaN, making them useful for gate dielectrics for metal-oxide semiconductor(MOS) devices and also as surface passivation layers to mitigate current collapse in GaN/AlGaN high electron mobility transistors(HEMTs).Clear evidence of inversion has been demonstrated in gate-controlled MOS p-GaN diodes using both types of oxide. Charge pumping measurements on diodes undergoing a high temperature implant activation anneal show a total surface state density of $~3{\;}{\times}{\;}10^{12}{\;}cm^{-2}$. On HEMT structures, both oxides provide effective passivation of surface states and these devices show improved output power. The MgO/GaN structures are also found to be quite radiation-resistant, making them attractive for satellite and terrestrial communication systems requiring a high tolerance to high energy(40MeV) protons.

• ETRI Journal
• /
• v.21 no.4
• /
• pp.52-64
• /
• 1999

QoS monitoring is a kind of real-time systems which allows each level of the system to track the ongoing QoS levels achieved by the lower network layers. For these systems, real-time communications between corresponding transport protocol objects is essential for their correct behavior. When two or more entities are employed to perform a certain task as in the case of communication protocols, the capability to do so is called interoperability and considered as the essential aspect of correctness of communication systems. This paper describes a formal approach on modeling and interoperability test case generation of a real-time QoS monitoring protocol. For this, we specify the behavior of flow monitoring of transport layer QoS protocol, i.e., METS protocol, which is proposed to address QoS from an end-to-end's point of view, based on QoS architecture model which includes ATM net work in lower layers. We use a real-time Input/Output finite State Machine to model the behavior of real-time flow monitoring over time. From the modeled real-time I/OFSM, we generate interoperability test cases to check the correctness of METS protocol's flow monitoring behaviors for two end systems. A new approach to efficient interoperability testing is described and the method of interoperability test cases generation is shown with the example of METS protocol's flow monitoring. The current TTCN is not appropriate for testing real-time and multimedia systems. Because test events in TTCN are for message-based system and not for stream-based systems, the real-time in TTCN can only be approximated. This paper also proposes the notation of real-time Abstract Test Suite by means of real-time extension of TTCN. This approach gives the advantages that only a few syntactical changes are necessary, and TTCN and real-time TTCN are compatible. This formal approach on interoperability testing can be applied to the real-time protocols related to IMT-2000, B-ISDN and real-time systems.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.123-134
• /
• 1993

This study was deviced to apply fuzzy concepts to pavement serviceability evaluation. An evaluation model was developed based on workmanship of pavement during construction, external load on pavement and current distress level. Five rating fuzzy sets, three weight fuzzy sets were developed based on the concept that the most appropriate balance was achieved in Gd which was established for grading the fuzzy overall rating results. Evaluation criteria and corresponding fuzzy rating scale were suggested. A computer program for evaluating serviceability based on the criteria was developed. The program was operated by simply typing in input data on each question and producing output as Gd on the screen. lt was possible to estimate the pavement serviceability level well using this fuzzy-set-based approach.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.5
• /
• pp.819-827
• /
• 1997

In this paper, a new modeling of a fine actuator for an optical pick-up has been proposed and multiobjective optimization of the actuator has been performed. The fine actuator is constituted of the bobbin which is supported by wire suspension, the coils which wind around the bobbin, and the magnets which cause the magnetic flux. If current flows in the coils, magnetic force is so produced as to be balanced with spring force of wire, so the bobbin is pisitioned. In this model the transfer function from input voltage to output displacementof bobbin has been obtained so that we can describe this integrated system with electromagnetic and mechanical parts. Wire suspension is regarded as a continuous Euler beam, damper as distributed viscous damping, and bobbin as a rigid body which can move up- and down- ward motion only. According to the model, the high frequency dynamic characteristics of the fine actuator can be known and the effect of damping can be investigated while the conventional second order model cannot. In multiobjective optimization, two objective functions have been chosen to maximize the fundamental frequency and the sensitivity with respect to the input voltage of the actuator so that Pareto's optimal solutions have been obtained using .epsilon.-constraint method. These objective functions will satisfy the trends which will enhance the access speed and reduce the tracking error in the optical pick-up technology of next generation. In the result of optimization, we obtain the designs of the optical pick-up fine actuator which has high speed, high sensitivity and low resonant peak. Furthermore, we offer the relation between two object functions so that the designer can make easy choice.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1146-1149
• /
• 2014

To discriminate polarities of stator windings for 3 phase induction motors terminal tags of which are not readable, it is possible to utilize the residual magnetic flux present at their rotors as well as to use the way based on external exciting current. The induced voltages are basically decided by parameters such as the quantity of residual flux, the rotator speed by hand force and the phase properties between stator windings. To adopt induced voltages by residual flux for polarity discrimination at sites, the measured voltages by multi-testers need to be readable in magnitude enough to discriminate winding condition with reasonable phase characteristics. This study focuses on the analysis of various connection cases in the expectation that the summing voltages induced by residual flux shall show zero in case of normal connections while the sum becomes greater indication if the connection is in wrong condition. The proposed method is applied to actual motors to disclose how effective it is for polarity discrimination at sites through comparison of output signals between normal and fault connections.

• Journal of Internet Computing and Services
• /
• v.21 no.2
• /
• pp.99-108
• /
• 2020

In this paper, we analyze the most suitable RA method among PAMA, DAMA, and RA classified by the multiple access method of satellite communication in the rapidly changing traffic environment according to the emergency and tactical situation. It suggests an alternative to improve the limit of output degradation. Based on the CRDSA protocol selected as the standard of DVB-RCS2 among the current satellite communication methods, CRDSA2R (Contention) maintains an optimal RA channel environment by checking the limitations in an environment where packet volume is rapidly increasing and observing channel load and channel conditions. We propose a Resolution Diversity Slotted ALOHA with Adaptive Random Access.

• Journal of Animal Environmental Science
• /
• v.8 no.2
• /
• pp.119-124
• /
• 2002

To evaluate composting process of piggery slurry, we made $1m^3$ bench scale composting reactor, and investigated the input and output of mass, moisture evaporation, volatile solid degradation, and running cost. For 15 days experimentation the results was as followed, The quantity of sawdust used was 0.47ton(18,000won) per 1ton slurry. The amount of moisture evaporated was 16.8kg/kg VS degradated. Total evaporation and VS degradation were 24.8%, 5.7% respectably. To analysis the running cost of that, we included only two factors, sawdust cost and compost income. The compost price to sell was 63won/kg(50% of market price) it made 8,694won income to 756 won loss, but 25won/kg, it was $13,650{\sim}23,100won$ loss per 1 ton slurry in the current pig farmer's condition. This cost was $8.5{\sim}14.4%$ of pig production cost and damage strongly to pig farmers to treat it.

• Journal of the Korean Society for Library and Information Science
• /
• v.44 no.4
• /
• pp.33-59
• /
• 2010

Library 2.0 advocates a socially rich, multimedia enabled, user originated and communally innovative environment that poses significant opportunities for the libraries to evolve and make themselves even more relevant and significant for her users. This paper presents a case study of the National Library Board of Singapore, in playing a vital role to facilitate the realisation of a long-term key national program, The Singapore Memory (SM) Project. SM embraces the attributes of the Library 2.0 environment to enable the nation's memory to be collected, organised, preserved, discovered, researched, augmented and created. The output of is an evolving collection of knowledge assets on Singapore along a Singapore Memory Content Continuum of existing content that is steadily augmented with new content. The content will be collected across all formats, in any language, from Singaporeans and non-Singaporeans, from any institution and agency, from Singapore and abroad, and from official and unofficial sources. The utopian scenario of SM Project is that any person, community, group or institution who has ever experienced Singapore in any way or has any material on Singapore will engage actively in the contribution, discovery and creation of content for the project, and thus become advocates to further encourage and catalyse more contribution, discovery and creation. The paper outlines the key approaches, concepts and ideas for the project. An important element is the proliferation, exposure and accessibility of the rich contents envisaged in the project. The SM proliferation plan along with examples of how two existing resources, namely, the Singapore Infopedia, a database of articles on Singapore's history, culture, people and events 4 and NewspaperSG, an online resource of current and historic Singapore and Malayan newspapers, have been designed are presented to demonstrate how content can be exposed, searched and discovered.

• Journal of IKEEE
• /
• v.10 no.1 s.18
• /
• pp.10-15
• /
• 2006

In this paper, a clock and data recovery (CDR) circuit for a serial link with a half rate 4x oversampling phase and frequency detector structure without a reference clock is described. The phase detector (PD) and frequency detector (FD)are designed by 4X oversampling method. The PD, which uses bang-bang method, finds the phase error by generating four up/down signal and the FD, which uses the rotational method, finds the frequency error by generating up/down signal made by the PD output. And the six signals of the PD and the FD control an amount of current that flows through the charge pump. The VCO composed of four differential buffer stages generates eight differential clocks. Proposed circuit is designed using the 0.18um CMOS technology and operating voltage is 1.8V. With a 4X oversampling PD and FD technique, tracking range of 24% at 3.125Gbps is achieved.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.284-293
• /
• 2013

This paper describes a DC-DC boost converter for thermoelectric energy harvesting. The designed converter boosts the VDD through a start-up block from a low-output voltage of a thermoelectric device and the boosted VDD is used to operate the internal control block. When the VDD reaches a predefined value, a detector circuit makes the start-up block turn off to minimize current consumption. The final boosted VOUT is achieved by alternately operating the DC-DC converter for VDD and the main DC-DC converter for VOUT according to the comparator outputs. Simulation results shows that the designed converter generates 2.65V from an input voltage of 200mV and its maximum power efficiency is 63%. The area of the chip designed using a 0.35um CMOS process is $1.3mm{\times}0.7mm$ including pads.