• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.297-303
• /
• 2016

This paper introduces auxiliary power supply systems (APS) for railroad applications and proposes a new power conversion structure for highly-efficient and lightweight APS systems. The proposed structure focuses on an improvement of the power density in APS. It eliminates unnecessary power conversion stages in the conventional APS structure by modulating the dc/dc converter circuit and the structure of the system. The dc/dc converter circuit used in the proposed structure is based on a multi-level half-bridge converter, a widely used topology in railroad APS applications; a flying capacitor is newly added to the conventional circuit. The added capacitor is used not only to enhance the soft switching condition of the switches, but also so that the new pantograph will have a side voltage source of a battery charger in the APS structure. Since the battery charger uses the pantograph side voltage source in the proposed structure, rather than using the output of the main dc/dc converter in the conventional structure, the size and efficiency of the main dc/dc converter are reduced and increased, respectively. To verify the effectiveness of the proposed structure, simulation results will be presented with metropolitan transit APS specifications.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.6
• /
• pp.633-641
• /
• 2015

Several complex processes that are employed in industries, such as shipping, power plants, and the petrochemical industry, involve time-varying behavior as well as strong nonlinear behavior during operation. The fixed-parameter proportional-integral-derivative (PID) controllers have difficulty in dealing with control problems that occur in such processes. In this paper, we propose a method of designing a nonlinear PID controller for industrial processes that exhibit a large number of nonlinearities and time-varying behavior. The gains of the nonlinear PID controller are characterized by a simple nonlinear function of the error and/or error rate depending on the process set-point and output. We tune the user-defined parameters using a genetic algorithm by minimizing the integral of time absolute error (ITAE) index. We verify the effectiveness of the proposed method by performing a comparison of the proposed method and two other nonlinear and adaptive methods that are employed for reference tracking, disturbance-rejection performances, and robustness to parameter changes on a continuously stirred tank reactor.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.163-167
• /
• 2006

The previous media has the function that was information of the contents was delivered by only content providers, but the current media makes the interactive function between content providers and general receivers. For this reason, the role of receivers are also expanded in the realm of multimedia and receivers have the roles of the sending and getting information for content user, not more receiver. The constituent members relative to content are content providers, users and user-created content. This paper introduces "the wonderland" the animation process management system for high-level user group. Also, most of images which are made of the animation process are publicly accessible, providing the public or the average user group for making resources easily by using "the wonderland." Although, the general user can get an environment to reedit their own new movie with making the most of provided movie sources are scene and cut units, according to one's taste and one's idea. The materialization of process management system can expand dramatically enough contents, and save the time to edit digital animation or movie, control numerous sources, made an animation processing, and the result output. Such "the wonderland" will significantly help to create future content.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.227-247
• /
• 2015

An X-band $8{\times}16$ dual-polarized active phased array antenna system has been implemented based on the substrate integrated waveguide(SIW) technology having low propagation loss, complete EM shielding, and high power handling characteristics. Compared with the microstrip case, 1 dB less is the measured insertion loss(0.65 dB) of the 16-way SIW power distribution network and doubled(3 dB improved) is the measured radiation efficiency(73 %) of the SIW sub-array($1{\times}16$) antenna element. These significant improvements of the power division loss and the radiation efficiency using the SIW, save more than 30 % of the total power consumption, in the active phased array antenna systems, through substantial reduction of the maximum output power(P1 dB) of the high power amplifiers. Using the X-band $8{\times}16$ dual-polarized active phased array antenna system fabricated by the SIW technology, the main radiation beam has been steered by 0, 5, 9, and 18 degrees in the accuracy of 2 degree maximum deviation by simply generating the theoretical control vectors. Performing thermal cycle and vacuum tests, we have found that the SIW array antenna system be eligible for the space environment qualification. We expect that the high efficiency SIW array antenna system be very effective for high performance radar systems, massive MIMO for 5G mobile systems, and various millimeter-wave systems(60 GHz WPAN, 77 GHz automotive radars, high speed digital transmission systems).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.617-626
• /
• 2010

In this paper, we have proposed and experimentally performed a polarization and phase control method of an optical signal which has same wavelength with the optical carrier to improve phase characteristics of a continuous wave(CW) generated by the double sideband-suppressed carrier(DSB-SC) as one of the famous photomixing technique for making sub-millimeter and terahertz waves. A polarization and phase controlled optical signal has been coupled with the general DSB-SC on an optical coupler. The output of the optical coupler is then photomixed by a photomixer. From our analysis and measurement results, we have found that the amplitude of the generated sub-mm and terahertz CW signal is higher 1.5 dB and the phase noise is lower about 3 dB@10 kHz offset frequency than the general DSBSC. Consequently, since our proposed method has improved the amplitude and phase noise of CW signals in the sub-mm and terahertz bands, it can be helpful results to make low cost CW generator in sub-millimeter and subterahertz bands.

• The Journal of Fisheries Business Administration
• /
• v.32 no.1
• /
• pp.15-39
• /
• 2001

The study, using the input-output analysis of 402 industrial sectors by Bank of Korea(BOK) and the resulting outcomes of price model, aims to evaluate the spillover effects the international fluctuations in crude oil prices have on the commodities prices and consequently, analyse the management and profitability of the offshore fisheries in Korea. At present, the fisher men are provided with tax-free oils for their fishing operations as specified under the Special Tax Treatment Control Law. However, the exhaustion of marine resources and new international fisheries agreements, which resulted in the loss of fishing grounds, made the stable catch even more unpredictable and the hike in the price of the international crude oil would have adverse effects on the fishing industry. The study revealed that the increasing rise in the price of crude oil would exert sweeping spillover effects on other industry sectors in general and accordingly, lead to a poorer performance by fisheries. The price spillover coefficients for the diesel oil was 0.6026, which would translate into the 42.6% increase in the prices of oil when the increase ratio of 73.3% for the base crude oil was applied based on the calculation methods employed in the study. This in turn increased the ratio of diesel oil required in the offshore fisheries from 23.3% to 16.6%, diminishing the ratio of current net profits to minus 2.0% from 4.2% otherwise. By fishing type, the Pair Trawl suffered current net profits loss most by ratio of minus 9.4% and other fisheries such as Coastal Stow Nets, Coastal Angling, Danish Sein also suffered ratio of 7% and more in the loss of current net profits. With the deteriorating fishing performance, coupled with the increasing international crude oil prices, it is urgently required that the authorities concerned deliberate in depth on such schemes as follows in efforts to secure stable fishing production. First, provision of large-scale storage facilities for oil is needed to timely adapt to the fluctuations in international crude oil prices. Secondly, in line with the stabilization of tax-free oil prices, duty levied on oils for fishing and tax collected from the refineries need to be tax-exempt. Thirdly, the beneficiaries from the provision of tax-free oil should be broadened, not limited to special fishing operation only. Fourth, investment in stabilization of the oil prices should be encouraged, possibly through funding from the formation of fisheries development funds underway.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.30 no.4
• /
• pp.274-278
• /
• 2016

In order to analyze the pathomechanisms of dysmenorrhea and efficiency of DSOM(diagnosis system of oriental medicine), clinical test was performed for 541 childbearing women having menstrual pain in P metropolitan city. The experimental group was composed of subjects who experience discomfort in daily life or interpersonal activities caused by menstrual pain with scores of 4 or above on the measurement of menstrual pain (MMP). The control group was composed of subjects reporting little or no discomfort with scores of 3 or below on the MMP. The menstrual period measurements were taken within 2-3 days following the first day of menstruation, when menstrual pain is at its peak. While non-menstrual period measurement were within 7-10 days after the last day of menstruation. The dampness pathomechanism was yielded most frequently in both groups, and then heart、heat、blood deficiency、cold、qi deficiency、phlegm、qi congestion、blood stasis in order. And the significant differences were in the pathomechanisms of blood deficiency、blood stasis、qi congestion、five viscera、phlegm and cold between the two groups. This means that general pathomechanisms of childbearing women in twenties mainly are dampness and heat, especially the experimental group has mostly disharmony of six qi and/but then move to insufficiency and stagnation of qi and blood and then to visceral disease pattern having statistically significant difference. Moreover in the two times of investigation, the output of pathomechanisms in each group has similar pattern in the same group. Therefore it can be concluded that the results of pathomechanisms by DSOM were in accordance with existing pattern classifications of dysmenorrhea in general and the DSOM showed reproducibility and stability in the data processing of questionnaires.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.3
• /
• pp.267-273
• /
• 2008

Energy efficiency and nutrient balance are good methods for environmental assessment of the environmentally-friendly agriculture. The objectives of this study were 1) to estimate the energy efficiency and nutrient balance of the organic rice farming, and 2) to suggest a solution to improvement the energy efficiency and nutrient balance. The set of estimation was performed at the organic rice farming area (8.9 ha) in Wanju-gun during the paddy cultivation period from 2006 to 2007. The organic farming complex consists of four weeding methods using 1) duck, 2) apple snail, 3) duck and apple snail and 4) hands and machinery. Results from this estimation should that the organic rice farming area was less efficient than conventional rice farming. The efficiency of organic farming area in 2006 was higher than in 2007. For the calculation of the nutrient balance, the N, P and K contents of input materials (cattle manure, milk vetch, mixed oilcake, rice bran, rice straw and barley straw) and output (farm products) were analysed. Annual environmental loads of N, $P_2O_5$ and $K_2O$ were estimated at 4.4 kg/10a, 13.8 kg/10a and 14.5 kg/10a, respectively. Cattle manure had the largest portion among the inputs items and nutrient concentration of cattle manure was high. Thus energy efficiency and nutrient balance depend on cattle manure input. Therefore it is necessary to control the manure input to improve the efficiency of organic rice farming.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.14-20
• /
• 2018

Electric vehicles are environmentally friendly because they emit no exhaust gas, unlike gasoline automobiles. However, since they are driven by the electric power from batteries, the distance they can travel based on a single charge depends on their energy density. Therefore, the lithium-ion battery having a high energy density is a good candidate for the batteries of electric vehicles. Since the electrode is an essential component that governs their efficiency, the electrode manufacturing process plays a vital role in the entire production process of lithium-ion batteries. In particular, the coating process is a critical step in the manufacturing of the electrode, which has a significant influence on its performance. In this paper, we propose an innovative process for improving the efficiency and productivity of the coating process in electrode manufacturing and describe the equipment design method and development results. Specifically, we propose a design procedure and development method in order to improve the core plate coating quality by 25%, using a technology capable of reducing the assembly margin due to its high output/high capacity and improving the product capacity quality and assembly process yield. Using this method, the battery life of the lithium-ion battery cell was improved. Compared with the existing coating process, the target loading level is maintained and dispersed to maintain the anode capacity (${\pm}0.4{\rightarrow}{\pm}0.3mg/cm^2r$ reduction).

• Journal of Broadcast Engineering
• /
• v.12 no.1 s.34
• /
• pp.11-27
• /
• 2007

T-DMB(Terrestrial-Digital Multimedia Broadcasting) for portable and mobile broadcasting service was officially launched in the metropolitan area of Korea in December 2005. The development of interactive data services and the expansion of T-DMB network have been now progressed, and the regional T-DMB broadcasters will be selected in the near future. Although it is important to evaluate service area and reduce a fringe area for optimizing RF coverage of T-DMB, there was no professional system to support those works, and therefore lots of resources in budget, manpower and time were required. The measurement considering characteristics of SFN(Single Frequency Network) is essential in the implementation of T-DMB network which needs to control synchronization, spacing and output power of transmitters. In addition, mobile measurement, enough measured parameters for many-sided analysis of reception quality, efficient management of enormous measured data and representation of measured results on the electronic map are also important in evaluating service area. In this paper, we derived requirements for a new measurement system in T-DMB by considering the above details, and we proposed and developed an integrated measurement and analysis system. The developed system was applied to the implementation of T-DMB network of KBS and field tests, and it proved its efficiency and accuracy in result.