• 한국전산구조공학회논문집
• /
• 제20권5호
• /
• pp.629-640
• /
• 2007

본 논문에서는 무한영역을 유한의 요소영역으로 표현하는데 있어서 가장 폭넓게 사용되는 점성감쇠기를 이용한 흡수경계의 성능을 향상시키기 위한 연구를 수행하였다. 2차원 평면조화파동방정식을 이용하여 응력파의 경계면으로의 입사각에 따른 흡수경계조건을 최적화 하였으며, Miller 등이 제안한 반무한 탄성체에서의 주기하중에 의한 전파식을 최적화된 점성감쇠기를 이용한 흡수경계 조건식에 삽입한 후 방정식의 해를 직접 비교함으로서 해석적인 검증을 수행하였다. 또한 수치적 검증을 위해 유한요소법을 사용하여 Miller 등의 파진행 문제를 구현하였으며, 이때 흡수경계를 구현하기 위해 점성감쇠기를 부착시킨 수치모형에서의 변위와 파의 도달시간을 고려하여 반사파의 영향을 제거시킨 수치모형에서의 변위를 비교함으로써 흡수율을 산정하였다. 흡수율은 수치모형의 경계와 내부점에 대해 각각 산정되었으며 이를 통해 수치적 검증을 수행하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1999년도 추계학술대회논문집
• /
• pp.225-233
• /
• 1999

Harbor design and construction plan in Korea becomes the most hot issue both in the Maritime Affairs and Fisheries Office and in the related port industries. Production of the plane and cross section maps together with the profile map for harbor project is done firstly and is important in all procedure because it is the most basic datum in counting the constructional expense for determination of the area and capacity. As the expense assigned on surveying part among the total expenses of harbor planning and construction in Korea is very small, it is difficult to make exact maps. Moveover, because the method used to make such maps is mostly traditional surveying such as plane table surveying , offset surveying, stadia surveying and level surveying, etc, it is difficult to get precise three dimensional maps. Therefore, for making more precise map in the harbor project, we have to use the newest surveying equipment. This study discusses the method of old surveying and recent surveying used for the three dimensional map of the site for lighthouse which gives navigational aids for the in-and out-bound ships. The authors are proposing a method for more precise three dimensional positioning in this study.

• 한국강구조학회 논문집
• /
• 제18권1호
• /
• pp.81-91
• /
• 2006

파형 강판은 파형 형상으로 가공한 강판으로 교량, 건축물, 암거 등의 구조물에 많이 사용된다. 파형강판을 이용한 거더의 구조물 적용시 국부적인 면내 압축하중에 의해 크리플링현상이 발생할 수 있는데 높은 면외방향의 강성을 갖는 파형강판의 특성 때문에 보강재를 사용하지 않는 경우가 많이 있고 파형형상에 따라 지압하중의 경계조건이 달라진다. 몇 연구자들이 제형파형강판의 지압강도에 대한 연구를 하였으나 파형형상이 지압강도에 미치는 영향이 크게 고려되지 않았다. 따라서 본 연구에서는 이에 따른 영향을 유한 요소해석법을 통하여 여러 가지 파형형상에 대한 변수해석을 하고 지압강도를 복부판 내하력과 플랜지 내하력으로 나누어 파형 형상과 지압강도와의 상관관계를 파악하였다.

• Steel and Composite Structures
• /
• 제10권1호
• /
• pp.69-85
• /
• 2010

The present paper presents a study on the behavior and design of corrugated web steel beams with and without web openings. In the literature, the web opening problem in steel beams was dealt with mostly for steel beams with plane web plates and research on the effect of an opening on a corrugated web was found out to be very limited. The present study deals mainly with the effect of web openings on the transverse load carrying capacity of steel beams with sinusoidally corrugated webs. A general purpose finite element program (ABAQUS) was used. Simply supported corrugated web beams of 2 m length and with circular web openings at quarter span points were considered. These points are generally considered to be the optimum locations of web openings for steel beams. Various cases were analyzed including the size of the openings and the corrugation density which is a function of the magnitude and length of the sine wave. Models without web holes were also analyzed and compared with other cases which were all together examined in terms of load-deformation characteristics and ultimate web shear resistance.

• 산업기술연구
• /
• 제18권
• /
• pp.7-16
• /
• 1998

This paper is an experimental study of investigating the reinforcing effect and the behavior of cohesionless slope installed with reticulated root pils. Reduced scale model tests with plane strain conditions were performed to study the behavior of the strip footing located on the surface of cohesionless slopes reinforced with root piles. Model tests were carried out with Jumunjin Standard Sand of 45% relative density prepared by raining method to have an uniform slope foundation during tests. Slope of model foundation was 1 : 1.5 and a rigid model slop. Parametric model tests were performed with changing location of model footing, arrangements of root piles and angles of pile installation. On the other hands, the technique with camera shooting was used to monitor sliding surface formed with discontinuty of dyed sand prepared during formation o foudation. From test results, parameters affecting the behavior of model footing were analyzed qualitatively to evaluate their effects on the characteristic of load - settlement, ultimate bearing capacity of model footing and failure mechanism based on the formation of failure surface.

• 콘크리트학회논문집
• /
• 제16권4호
• /
• pp.467-476
• /
• 2004

철근콘크리트(RC)의 경우 철근과 콘크리트의 부착특성에 의한 균열의 제어로 균열 후의 재료모델은 무근콘크리트(PL)와 다르다. 수평력을 받는 RC 기둥의 비선형 거동특성을 기둥의 단면을 영역화(RC영역과 PL영역)하여 각기 다른 재료모델을 적용하여 3차원 해석으로 모사였다. 파괴시 면외방향으로의 전단변형률은 비균일성을 나타내면서 진전되고 이러한 경향은 면외방향으로의 두께가 클수록 강하게 나타났다. 이러한 변형률의 분포특성을 고려하지 않는다면 2차원 해석에서는 기둥의 내하력과 변위성능을 과다하게 예측하게 된다. 인장과 전단모델에서 적절한 등가 경화계수를 도입함으로써 2차원 해석에서도 3차원 해석과 유사한 결과를 얻을 수 있음을 확인하였다.

• Computers and Concrete
• /
• 제15권3호
• /
• pp.391-410
• /
• 2015

One of the most common applications of ferrocement is the manufacturing of thin stiffened plates which are prone to buckling. This study focuses on the investigation of the behavior of a ferrocement plate, stiffened in both directions by means of an appropriate grid of ribs. In the present paper detailed three-dimensional numerical Finite Element models are formulated for the simulation of the behavior of the structure under study, which are able to take into account both the geometric and material non-linearities that are present in the subject at hand (plasticity, cracking, large displacements). The difference among the formulated models lies on the use of different types of finite elements. The numerical results obtained by each model are compared and the most efficient model is determined. Finally, this model is in the sequel used for the further investigation of the effect of different parameters on the ultimate load capacity, such as the initial out-of-plane imperfection of the plate and the interaction between the axial loads in both directions.

• Earthquakes and Structures
• /
• 제11권4호
• /
• pp.563-582
• /
• 2016

The failure mechanism and maximum collapse load of masonry structures may change significantly under static and dynamic excitations depending on their internal arrangement and material properties. Hence, it is important to understand correctly the nonlinear behavior of masonry structures in order to adequately assess their safety and propose efficient strengthening measures, especially for historical constructions. The discrete element method (DEM) can play an important role in these studies. This paper discusses possible collapse mechanisms and provides a set of parametric analyses by considering the influence of material properties and cross section morphologies on the out of plane strength of masonry walls. Detailed modeling of masonry structures may affect their mechanical strength and displacement capacity. In particular, the structural behavior of stacked and rubble masonry walls, portal frames, simple combinations of masonry piers and arches, and a real structure is discussed using DEM. It is further demonstrated that this structural analysis tool allows obtaining excellent results in the description of the nonlinear behavior of masonry structures.

• 소음진동
• /
• 제9권1호
• /
• pp.33-41
• /
• 1999

This paper presents a method of actively controlling the interior noise by a trim panel with hybrid feedforward-feedback control loop. The control technique is designed to minimize the vibration of panel whose motion is limited to that of a piston (out-of-plane motion). The hybrid controller consists of an adaptive feedforward controller in conjunction with a linear quadratic Gaussian (LQG) feedback controller. In order to maintain control performance of both persistent and transient disturbances, the feedback loop speeds up the adaptation rate of feedforward controller by improving damping capacity of secondary plant related with the adaptation rule. Numerical simulation and experimental result indicate that the hybrid controller is a more effective method for reducing the vibration of the panel (and therefore the interior noise) compared to using feedforward controller.

• 한국해양공학회지
• /
• 제5권1호
• /
• pp.16-24
• /
• 1991

This paper presents a method of the reliability analysis for a tension leg platform(TLP)in severe storm waves by using the first passage concept of the random tensile stress in the tendons. In the present method, two failure conditions are considered ;i.e., the exceedance of the ultimate tensile capacity and the occurrence of the negative tension. In order to consider the correlation effects between the failure events for each corner resulted from the rupture of all tencons at one corner, a new system limit state for a rectangular shaped TLP is developed, which is defined in terms of the TLP motions in the vertical plane ;i.e., heave, roll, and pitch. To illustrate the validity of the present method, the numerical analysis is carried out for two TLP's with different structural dimensions. Then, the results are compared with those by other methods.