• 한국통신학회논문지
• /
• 제22권6호
• /
• pp.1251-1258
• /
• 1997

Generally, it is very important to study selective coupling between cavities of the filter structure using multimode cavity resonator. In this paper, we have manufactured 5-pole bandpass filter(BPF) using dual and triple-mode cavity resonator. To do so, we have derived the formulas for coupling coefficient about coupling between TE-modes from TM/TE-mode's tangential and lognitudinal field intensities each other. To implement the Chebyshev response, the intercabity slot combining dual-mode and triple-mode is designed to couple one H-field of TE-mode parallel to slot plate. In this paper, specially it is derived the formulas for T $E_{11p}$-mode from TE-modes, and determined after obtaining location and size of intercabity slot from the equation. In this ppaer, based on this result, we designed and implmented teh bandpass filter operated at the center frequency of 14.5GHz with a Chebyshev response. For the manufactured cavity filter, dual-mode and triple-mode cavity are resonted by two orthogonal T $E_{113}$-modes, and by two orthogonal T $E_{113}$-modes and one T $M_{012}$-mode, respecitively. The 2-stage 5-pole BPF proposed in this paper has the insertion loss of -2.32dB, the reflection loss of -15dB in the passband, and the out-or-rejection of -67dB.

• Membrane and Water Treatment
• /
• 제13권1호
• /
• pp.51-62
• /
• 2022

Vacuum-assisted air gap membrane distillation (V-AGMD) has the potential to achieve higher flux and productivity than conventional air gap membrane distillation (AGMD). Nevertheless, there is not much information on technical aspects of V-AGMD operation. Accordingly, this study aims to analyze the effect of membrane deformation on flux in V-AGMD operation. Experiments were carried out using a bench-scale V-AGMD system. Statistical models were applied to understand the flux behaviors. Statistical models based on MLR, GNN, and MLFNN techniques were developed to describe the experimental data. Results showed that the flux increased by up to 4 times with the application of vacuum in V-AGMD compared with conventional AGMD. The flux in both AGMD and V-AGMD is affected by the difference between the air gap pressure and the saturation pressure of water vapor, but their dependences were different. In V-AGMD, the membranes were found to be deformed due to the vacuum pressure because they were not fully supported by the spacer. As a result, the deformation reduced the effective air gap width. Nevertheless, the rejection and LEP were not changed even if the deformation occurred. The flux behaviors in V-AGMD were successfully interpreted by the GNN and MLFNN models. According to the model calculations, the relative impact of the membrane deformation ranges from 10.3% to 16.1%.

• 한국자동차공학회논문집
• /
• 제17권1호
• /
• pp.146-153
• /
• 2009

The performance characteristics of heat exchangers which consist of a gas cooler, an evaporator and an internal heat exchanger have been investigated at various operating conditions of $CO_2$ air conditioning system by experiments. The heat exchangers were designed for use in the vehicle $CO_2$ air conditioning system, when considering the characteristics of heat transfer and high pressure as $CO_2$ refrigerant. This paper studied the performance of heat exchangers at various compressor speeds and expansion valve openings, and quantified the heat transfer rates and pressure drops. Heat transfer rates at the gas cooler and the evaporator were 6.9 kW and 5.2 kW, respectively, when the compressor speed was 4000 rpm and refrigerant vapor quality at the evaporator outlet was 0.98. Therefore, this paper carried out that the heat exchangers were analyzed to achieve superior performance for the vehicle transcritical $CO_2$ cycle.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.875-880
• /
• 2018

This paper proposes a novel combined compensation structure in the infrared receiver chip. For the infrared communication chip, the current-voltage (I-V) convert circuit is crucial and important. The circuit is composed by the transimpedance amplifier (TIA) and the combined compensation structures. The TIA converts the incited photons into photocurrent. In order to amplify the photocurrent and avoid the saturation, the TIA uses the combined compensation circuit. This novel compensation structure has the low frequency compensation and high frequency compensation circuit. The low frequency compensation circuit rejects the low frequency photocurrent in the ambient light preventing the saturation. The high frequency compensation circuit raises the high frequency input impedance preserving the sensitivity to the signal of interest. This circuit was implemented in a $0.6{\mu}m$ BiCMOS process. Simulation of the proposed circuit is carried out in the Cadence software, with the 3V power supply, it achieves a low frequency photocurrent rejection and the gain keeps 109dB ranging from 10nA to $300{\mu}A$. The test result fits the simulation and all the results exploit the validity of the circuit.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.908-925
• /
• 2014

Induction Motor (IM) has several desirable features for high performance adjustablespeed operation. This paper presents the design of a robust controller for vector control induction motor drive performances improvement. Proposed predictive speed controller, which is aimed to guarantee the stability of the closed loop, is based on the Poisson-Laguerre (PL) models for the association vector control drive and the induction motor; without necessity of any mechanical parameter, and requires only two control parameters to ensure implicitly the integrator effect on the steady state error, load torque disturbances rejection and anti-windup effect. In order to improve robustness, insensitivity against external disturbances and preserve desired performance, adaptive control is added with the aim to ensure an online identification of controller parameters through an online PL models identification. The proposed control is compared with the conventional approach using PI controller. Simulation with MATLAB/SIMULINK software and experimental results for a 1kW induction motor using a dSPACE system with DS1104 controller board are carried out to show the improvement performance.

• 제어로봇시스템학회논문지
• /
• 제14권9호
• /
• pp.948-955
• /
• 2008

The conventional PID controller has been widely employed in industry. However, the PID controller with one degree of freedom(DOF) can not optimize both set-point tracking response and disturbance rejection response at the same time. In order to solve this problem, a few types of 2DOF PID controllers have been suggested. In this paper, a tuning formula for a 2DOF PID controller is presented. The optimal parameter sets of the 2DOF PID controller are determined based on the first-order plus time delay process and a real-coded genetic algorithm(RCGA) such that the ITAE performance criterion is minimized. The tuning rule is then addressed using calculated parameter sets and another RCGA. A set of simulation works are carried out on three processes with time delay to verify the effectiveness of the proposed rule.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.496-498
• /
• 2021

우리나라는 1980년 이전 높은 출산율을 기반으로 총인구는 지속적으로 증가하여 왔으며, 1980년대 중반 이후 출산율은 급격하게 떨어지면서 인구대체 수준 이하까지 떨어지게 되었다. 지역 내 저출산의 원인은 자발적 거부라기보다는 지역 사회 구조적인 원인을 다각적으로 파악하여 원인을 찾아내는 것이 필요하다. 여러 지역 중 출산율이 매우 낮은 예산 지역을 기준으로 지역 인터넷 뉴스 및 산모들이 많이 참여하는 지역 대표 카페 데이터를 수집하였다. 인구감소, 저출산, 육아 복지 등에 관하여 이슈화 되었던 동시출현단어의 빈도를 분석하여 출산 저해 원인을 분석하였다.

• 한국전자파학회논문지
• /
• 제15권7호
• /
• pp.644-652
• /
• 2004

본 논문에서는 급전면의 개방스터브와 접지면의 슬롯으로 구성되어 있는 초광대역의 저지대역을 갖는 저역통과 여파기 단위 구조를 캐스캐이드한 저역통과 여파기를 설계하였다. 초광대역의 저지대역을 갖는 저역통과 여파기 단위 구조는 급전면 개방 스터브에 의해 통과대역 특성을 결정하는 여파기 구조와 이러한 여파기의 dual 구조로 접지면 슬롯에 의해 통과대역 특성을 결정하는 여파기 구조가 있으며, 각각의 단위구조를 캐스캐이드함으로써 단일 여파기보다 더욱 향상된 저지대역과 skirt 특성을 얻을 수 있었다. 개방 스터브에 의해 통과대역 특성이 결정되는 구조와 dual 구조의 캐스캐이드 여파기는 각각 1.035㎓와 1.286㎓에서 -3㏈ 차단 주파수를 가지며 저지대역은 두 구조 모두 -20㏈ 기준으로 20㎓ 이상의 광대역을 이루었다.

• 한국태양에너지학회 논문집
• /
• 제22권2호
• /
• pp.27-32
• /
• 2002

The Characteristics of heat transport in the heat pipe with a double vapor path and different kinds of the working fluid were investigated experimentally. The Experiment was carried out with acetone/ethanol. ethanol/ethanol. and in the aluminium container of the double vapor path. Performance measurements can be operated at the high level by 24000 w/m2 heat flux in the 1000mm evaporator. They are each estimated at the high temperature and experimentally reviewed the characteric of the heat rejection. The results shew that they are stably operated under each condition and the fluid was complemented each other at the fluid's experiment and brought about the extention of operating temperature. In this study, The reliable basic data obtained by the teste in the heat pipe with a double vapor path can be used for thermal design, manufacture, and production etc.

• 한국통신학회논문지
• /
• 제10권6호
• /
• pp.317-326
• /
• 1985

신호의 $90^{\circ}$위상차 분배/합성이 가능한 Quadrature Hybrid는 Image Rejection Mixer등에 널리 쓰이고 있으며, 특히 VHF대 위성통신을 행할 경우에는 집중정수형으로 제작하는 것이 대단히 유리하다. 이 경우 자기결합을 갖게 되면 제작이 곤란하므로 자기결합을 갖지 않는 형식으로 광대역 특성을 갖는 소자를 설계하는 것은 대단히 중요하다. 본 연구에서는 자기결합을 갖지 않는 90Hybrid의 기본회로를 제안하고, 이 기본회로를 Phase Shifter를 이용하여 Cascade 로 연결하고 최적화함으로써 광대역화하는데 성공하였다. 여기서 설계한 Hybrid 는 약 54%의 대역폭을 가지며, Branch-Guide Type방향성 결합기에 비하여 훨씬 더 우수한 특성을 가짐을 입증하였다. 또한, 실험에 의하여 제안한 설계법의 타당성을 확인하였다.